Trimmer Replacement Parts
Search By Trimmer Model or Part Number
Most Popular Trimmer Replacement Parts
This is the part the mower blade attaches to, it is mounted to the deck of the mower by four bolts.
Spacer must be installed under the pulley.
Installing with the spacer on top of the pulley (or failing to use spacer) will result in damage to shaft and pulley.
The mounting holes on the Mandrel are not threaded. But the bolts that are used to secure the mandrel to the deck are self tapping. The Mandrel shaft goes thru the deck and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys.
Size: Tall
It is sold individually.
By pressing the bulb it will purge the air from the carburetor.
Then fuel will come up from the fuel tank through the fuel line then into the carburetor.
The excess fuel will be forced back into the tank through the fuel return line.
Over time the primer will lose its elasticity or crack and need to be replaced.
The purpose of this filter is to keep dirt and other small particles from entering the carburetor and engine and causing internal engine damage.
Once this type of filter gets clogged or dirty it should be changed (Not Cleaned). This is to prevent restricted air flow and foreign matter from entering the engine. This is a double layer air filter.
Popular Trimmer Models
Shop Trimmer Parts by Brand
Trimmer Help & Repair Articles
How to Install a Filter Kit on an Echo Trimmer (Model SRM-225) | How to Fix a 2-Cycle Engine Carburetor |
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225... | This article will walk you step-by-step through the process of repairing a 2-Cycle... |