Cub Cadet Trimmer Parts
We sell only genuine OEM Cub Cadet ® parts.
Top Cub Cadet Trimmer Models
See All ModelsPopular Cub Cadet Trimmer Parts
- Manufacturer Part Number:
- 753-06183
This OEM fuel tank assembly is made out of Plastic and it includes the fuel lines, fuel cap, and fuel filter. It is a common part in gas trimmers that is used to hold the fuel needed for the engine. It is very important to replace the fuel tank if it is cracked or damaged to avoid further damage or serious injuries. Make sure to drain the gas tank before starting a repair.
- Manufacturer Part Number:
- 753-06190
A carburetor basically consists of an open pipe through which the air passes into the inlet manifold of the engine. The pipe is in the form of a Venturi: it narrows in section and then widens again, causing the airflow to increase in speed in the narrowest part. Below the Venturi is a butterfly valve called the throttle valve ' a rotating disc that can be turned end-on to the airflow, so as to h...
- Manufacturer Part Number:
- 791-153066B
- Manufacturer Part Number:
- 753-06185
This is a manufacturer approved O-Ring designed for lawn and garden equipment. This is the O-Ring that provides an Air Tight seal between Carburetor and Cylinder Head. If doing maintenance on carburetor it is recommended to replace the O-Ring instead of re-using the old one. Over time rings and seals tend to dry out and would no longer provide proper seal compromising engines performance.
- Manufacturer Part Number:
- 794-00082
- Manufacturer Part Number:
- 753-06847
This is a genuine OEM sourced part which is specially made for use with Craftsman handheld lawn and garden equipment. Its purpose is to deliver electric current from the ignition system to the combustion chamber. It will ignite the air fuel mixture by the spark. Unfortunately, over time a spark plug can wear out or it may get damaged eventually requiring a replacement to ensure peak performance. K...
- Manufacturer Part Number:
- 753-06253
This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with trimmers and blowers. The gasket is used to seal the connection between the carburetor and the air cleaner assembly. It is recommended to replace gaskets when servicing the motor to ensure proper seals when the parts are reassembled. This item is available as an individual replacement part.
- Manufacturer Part Number:
- 753-06797
This is an authentic part that is supplied directly from the original equipment manufacturer for Craftsman trimmers. The fuel tank houses the fuel used to power the machine. This part is made of hard plastic and is sold individually. The fuel cap and fuel lines are included in the assembly. For installation you will need a screw driver to remove and shrouds and covers.
- Manufacturer Part Number:
- 753-06250
This is a genuine part that is supplied by the original manufacturer for use with Craftsman trimmers. The fuel tank stores the gasoline used to power the trimmer. This part is made of plastic and is sold individually. The fuel cap and fuel lines are all included in this kit. For this repair, you will need a screwdriver to remove any panels or covers, a pair of needle nose pliers, and a socket wrench to aid you.
- Manufacturer Part Number:
- 841-032392S
- Manufacturer Part Number:
- 753-06417
This is a genuine OEM replacement part designed for use with some Handheld String Trimmers. This filter is made out of Foam and it is sold individually. The purpose of this filter is to keep dirt and other small particles from entering the carburetor and engine and causing internal engine damage. Once this type of filter gets clogged or dirty it should be changed (Not Cleaned). This is to prevent ...
- Manufacturer Part Number:
- 753-1155
This spool is for line trimmers.
Spool houses the cutting line and fits inside the cutting head to cut grass and weeds.
Wear work gloves to protect your hands when installing this part.