eReplacementParts.com
877-346-4814
Metabo Parts

Switch 343409450

OEM part for: Metabo

Part Number: 343409450


Install
Videos!
Switch - 343409450:Metabo 360 View
Switch - 343409450:MetaboSwitch - 343409450:MetaboSwitch - 343409450:MetaboSwitch - 343409450:Metabo 360 View
In Stock
Ships within 1 business day
Medium 15-30 minutes (4 rated repairs)?
OEM: Original Equipment Manufacturer ?
Metabo
Does this fit my product?

Product Description ?

This is a specially designed replacement switch made for Metabo angle grinders. Switches are one of the most commonly replaced items in power tools. They play important role in handling on/off operations of a tool. Because they have mechanical internals, they will eventually break down requiring replacement. This switch has a plastic body and it is sold individually. Please note the electronic control unit is sold separately.

To complete this repair you would need a screwdriver.

• First make sure the unit is not plugged in
• Then you want to separate housing pieces by removing screws
• Disconnect wires from the old switch
• Replace old switch with a new one
• Reconnect wires
• Reassemble and test the grinder

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Customer Part Reviews ?

5
Average Rating (out of 5):
1 Review
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Simple repair.
    This part looked like OE plug and play.
    Guest - June 15, 2022 Verified Purchase

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Switch


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Medium 15-30 minutes (4 rated repairs)?

    Switch failed and shaft lock button needed replacemnt. It fell off and was lost, so couldn't be put back on.

    Dean - January 2, 2019
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    , torx bit #20 and #25, needle nose plyers

    The tool housing is easily dismantled. Switch part is a simple plug in part with stab in electrical wire connections. I replaced the brushes as a preemptive measure. Pop the old ones out and pop the new ones in. Needle nose pliers are helpful.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    switch was bad, needed brushes

    Les - January 24, 2019
    Tool Type

    Grinder

    Difficulty

    Medium

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers

    remover switch and replaced, changed out brushes, replaced bolt that holds blade when changing blades
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Switch not working, needed brushes

    maciej - February 26, 2017
    Tool Type

    Grinder

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Pliers

    Remove the lower housing of the grinder
    Make a wiring diagram
    Disconnect the wires from the old switch
    Connect the wires to the new switch
    Disconnect the old brushes and remove from brush holders
    Connect the new brushes and place in the brush holders
    Install the lower housing
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Would not run

    Greg - March 21, 2016
    👍 0 of 1 people found this instruction helpful
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Nutdriver

    Removed the lower housing of the grinder. Made a wiring diagram of the switch and electronic unit. Disconnected old switch and electronic unit. By referring to the wiring diagram I reconnected the new switch and electronic unit .Replaced the lower housing. Then tested the grinder. Worked great.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal