Easy
15-30 minutes
This is a genuine manufacturer approved replacement switch assembly. It is specially produced for Milwaukee electric drills/drivers. It is an impotent component of the tool that handles the on/off functions of a unit. Since switches have moving mechanical parts, they will eventually wear out and will require a replacement. This switch has a plastic body with lead wires attached and it is sold individually.
To replace this switch you will need a screwdriver.
• Make sure the equipment is unplugged
• Remove the housing screws
• Remove the housing/cover
• Disconnect wires from the old switch and remove it
• Secure the new switch in place and connect wires to it
• Reassemble and test the unit
Switch Assembly 23-66-2365
OEM part for: Milwaukee
Part Number: 23-66-2365
$70.56
In Stock
Ships within 1 business day 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.05 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 4 machines
Milwaukee
1680-20 (SER 407A) Electric Drill View Diagrams & Manuals
1680-20 (SER 407B) Electric Drill / Driver View Diagrams & Manuals
1680-20 (407C) Super Hawg View Diagrams & Manuals
1680-21 Super Hawg Drill View Diagrams & Manuals
This item works with the following types of products:
- Drill Parts
- Electric Drill Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Fast shipment!
I received the correct items in good condition with speedy delivery.
Christine -
May 7, 2020
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Switch Assembly
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
the drill switch was broke, the trigger was loose and the cord had tears in the wire cover
Mike - January 21, 2020
Tool Type
Electric Drill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
removed the screws holding the handle together
separated the two handle pieces to expose all wiring and parts
removed trigger, switch and cord.
installed new trigger, switch and cord
screwed handle back together
plugged drill in and tested for proper operation
separated the two handle pieces to expose all wiring and parts
removed trigger, switch and cord.
installed new trigger, switch and cord
screwed handle back together
plugged drill in and tested for proper operation
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Motor worked intermittently
Robert - September 26, 2019
Tool Type
Electric Drill
Difficulty
Easy
Time
30-60 minutes
Tools Used
Wrench Set
Replaced REVERSE SWITCH and LINE CORD. Line cord replaced because Ground pin on plug was broken off.
Handle Gear Case replaced also. Handle was not supplied with mounting screws, had to visit Hardware store. Old screws were missing.
Repair went excellent.
Robert
Handle Gear Case replaced also. Handle was not supplied with mounting screws, had to visit Hardware store. Old screws were missing.
Repair went excellent.
Robert
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Plumber apprentice broke the handle assembly.
David - March 16, 2018
Tool Type
Electric Drill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Removed the broken parts and replaced with the new parts. Very simple repair.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Milwaukee super hawg drill stopped working
Joshua - February 24, 2017
Tool Type
Drill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Opened up the drill trigger housing assembly. Made a wiring diagram. Disconnected both switches and removed them. Connected the new switches. Put drill back together. Plugged in drill, and I'M BACK IN ACTION BABY!!! OH YEAHHHH!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
