Easy
15-30 minutes
This is genuine manufacturer sourced replacement power cord. It is made for use with Milwaukee electric drills/drivers. The power cord is a crucial component for an electric power tool, because, it supplies electricity from an outlet to the tool. This cord has rubber insulation and it is sold individually. Please note, the protector/grommet is included in this assembly.
To replace this power cord you should only need a screwdriver.
• Remove the housing screws and separate the housing pieces
• Disconnect wires from the old cord
• Remove old cord and secure the new one in place
• Reassemble and test the unit
Cord 22-64-1260
OEM part for: Milwaukee
Part Number: 22-64-1260
$25.90
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.68 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 4 machines
Milwaukee
1680-20 (SER 407A) Electric Drill View Diagrams & Manuals
1680-20 (SER 407B) Electric Drill / Driver View Diagrams & Manuals
1680-20 (407C) Super Hawg View Diagrams & Manuals
1680-21 Super Hawg Drill View Diagrams & Manuals
This item works with the following types of products:
- Drill Parts
- Electric Drill Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
0
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Good part some adjustment
Cord and protector fit well, some adjustment no problem. The wait for the part was a couple weeks that could be an issue. Over all very good
Guest -
September 20, 2023
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Cord
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The drill is old and the cord needed replacement.
andrew - September 22, 2023
Tool Type
Electric Drill
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, soldering iron
Parts Used
1- Removed screws in the handle
2-Remove wires from switch....you have to take a wire and push where the wire goes to release the power wires from the switch.
3- I had to solder the new wires so that they could be inserted into the switch terminals.
4-A small amount of rubber had to be removed from the cord protector for a good fit .
5- Nothing is out of the usual for a cord change
2-Remove wires from switch....you have to take a wire and push where the wire goes to release the power wires from the switch.
3- I had to solder the new wires so that they could be inserted into the switch terminals.
4-A small amount of rubber had to be removed from the cord protector for a good fit .
5- Nothing is out of the usual for a cord change
Did you find this story helpful?
Thanks for voting and helping fellow customers!
the drill switch was broke, the trigger was loose and the cord had tears in the wire cover
Mike - January 21, 2020
Tool Type
Electric Drill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
removed the screws holding the handle together
separated the two handle pieces to expose all wiring and parts
removed trigger, switch and cord.
installed new trigger, switch and cord
screwed handle back together
plugged drill in and tested for proper operation
separated the two handle pieces to expose all wiring and parts
removed trigger, switch and cord.
installed new trigger, switch and cord
screwed handle back together
plugged drill in and tested for proper operation
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Motor worked intermittently
Robert - September 26, 2019
Tool Type
Electric Drill
Difficulty
Easy
Time
30-60 minutes
Tools Used
Wrench Set
Replaced REVERSE SWITCH and LINE CORD. Line cord replaced because Ground pin on plug was broken off.
Handle Gear Case replaced also. Handle was not supplied with mounting screws, had to visit Hardware store. Old screws were missing.
Repair went excellent.
Robert
Handle Gear Case replaced also. Handle was not supplied with mounting screws, had to visit Hardware store. Old screws were missing.
Repair went excellent.
Robert
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Plumber apprentice broke the handle assembly.
David - March 16, 2018
Tool Type
Electric Drill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Removed the broken parts and replaced with the new parts. Very simple repair.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Accidentally had cut my cord
Denis - March 5, 2016
Tool Type
Electric Drill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed the screws from the switch handle. Removed the old cord wires, then installed the new cord wires. Assemble the handles. Tested the drill. And it works.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Switch acting up and cord needed replacing
Luis - November 15, 2015
Tool Type
Electric Drill
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Remove screws holding Handel together, separate the two halves, remove the switch and take the wires off one at a time and place the new cord wires in the same place. Place new switch in handle and fasten the two handle halves together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
