eReplacementParts.com
877-346-4814
Honda Parts
Preferred Partners of
Repair Parts Home  Lawn Equipment Parts  Honda Parts  16561-ZL8-810 Spring- Governor
Grid squares measure 1x1 inch

Spring- Governor

Part Number: 16561-ZL8-810
Honda
Availability: 2 in stock
Price: $4.24
Order within the next 7 hours
and your part ships today!
Product Information
Manufacturer: Honda
Product Number: 16561-ZL8-810
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Compatibility

This part is compatible with the following machines:

Honda
Expand the 27 compatible machines
Products Compatibility

This item works with the following types of products:

  • • Engine
  • • Snowblower
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Engine
Parts Used:
Spring- Governor - 16561-ZL8-810
Arm- Governor - 16551-ZL8-010
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Socket set, Adjustable Wrench
Governer arm broke, fuel filter deteriorated.
Honda hs520 snowblower gov arm fix:

1. Remove the cover by unscrewing 6 bolt screws, 2 have locking nuts in front. Need two nut drivers.
2. Remove snow chute, 3 bolt screws, with Phillips, and nut driver.
3. Unscrew Phillips head screw holding gas line shutoff, freeing it from the cover casing at the rear. Disconnect electrical connects by removing two wires from harness retainer, and the pulling apart.
4. Unscrew two bolt screws holding the rear cover to the frame, then remove the rear cover.
5. Using a crescent wrench, loosen the nut on compression fitting on old governer arm. Note position of semi-circular, notch on valve post, as well as depth.
6. Remove governor spring from top and bottom of old governer arm.
7. Remove old governer arm
8. Twist valve arm left and right using crescent on the semi-circular notch of valve arm post, to ensure the spring clip is still properly seated and torqued. Turn arm clockwise until stops.
9. Put new governor arm on a post, attach springs to top and bottom. Note position and depth of post as noted before removing an old one.
10. Tighten down locking nut with a crescent wrench, supporting the arm with counter tension and tighten till the arm bottom gap is almost closed.
11. Move the gov arm to the left to verify free operation.
12. Re-attach rear cover that has electrical, reconnect wires, harness, bolts.
13. Start up and verify correct idle operations.
14. Reattach the main cover, and then chute.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
Manufacturer: Honda
Product Number: 16561-ZL8-810
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide

Fixing things makes sense...

...And we make it easy! With our Fix app, you always have a personalized repair guide on-hand. Easily find manuals and replacement parts on your phone while you’re DIYing in the garage or garden.

"Love the flexibility of the app to add everything in the home and garage. Access to manuals and parts right there makes it convenient."

Available on the App Store Get it on Google Play
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal