Medium
15-30 minutes
This is an original Master replacement part. The spark module is designed by the manufacturer for use in air heaters. This part is a complete component including metal wires and a plastic housing, and it is used to carry an electrical spark for ignition in the machine. You may require a wrench or screwdriver when replacing this item. This part is sold individually.
Spark Module 22-604-0005
OEM part for: Pro Temp, Heat Stream, Heat Hog, Master
Part Number: 22-604-0005
$37.36
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Compatibility
This part will fit the following 16 machines
Pro Temp
PT150VGFA Air Heater View Diagrams & Manuals
PT60VGFA Air Heater View Diagrams & Manuals
PT125VGFA Air Heater View Diagrams & Manuals
PT150VGFAA Air Heater View Diagrams & Manuals
Heat Stream
HS60VGFA Air Heaters View Diagrams & Manuals
HS125VGFA Air Heaters View Diagrams & Manuals
HS50VGFA Air Heaters View Diagrams & Manuals
HS100VGFA Air Heaters View Diagrams & Manuals
Heat Hog
HH50VGFA Air Heaters View Diagrams & Manuals
HH100VGFA Air Heaters View Diagrams & Manuals
HH150VGFA Air Heaters View Diagrams & Manuals
Master
MH60VGFA Air Heater View Diagrams & Manuals
MH125VGFA Air Heater View Diagrams & Manuals
MH150VGFA Air Heater View Diagrams & Manuals
MH50VGFA Air Heater View Diagrams & Manuals
MH100VGFA Air Heater View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Heater Parts
This part replaces obsolete part #: 22-604-0001
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
The spark was gone.
Needed a new spark module for my propane heater. Found Ereplacement parts online. Easy to order and arrived in a timely manner. No problemo.
Guest -
April 20, 2021
Verified Purchase
Spark module for propane /electric heater.
Part worked when installed. Shipping cost were high and delivery time was slow.
Steven -
October 30, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Spark Module
I have the same problem as the 2nd story listed here, I hold the knob down for a long time, over a minute, and it won't really fire up. Only in part/ enough to keep it lit.
Kyle
for model number MH60VGFA
asked on 2023-03-21
Hi Kyle,
Thank you for your question. According to your owner's manual, keep the valve knob depressed for at least 30 seconds after lighting the burner. After 30 seconds, release the valve knob. If the burner does not stay lit, repeat the lighting procedure. If it will not stay lit, there may be no spark at the module, you may have an incorrect spark gap, or a corroded spark plug/electrode. If the module wire is loose, re-attach or tighten it if it is loose and if there are any issues with the spark module replace it. Make sure that the spark plug gap is set to 0.16 inches and replace the spark plug if you need to. If you have any questions, please let us know. We look forward to hearing from you!
eReplacementParts Team March 21, 2023
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
No spark
David - April 7, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Heater
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Remove bottom of wiring compartment...Remove fan from rear of heater...Un plug wire from igniter...Remove two screws holding spark module and remove. Reverse procedure to install. Make sure short screw holding module faces rear so fan does not hit it and make sure all wires in front of fan are not in the path of the blades.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Would not stay lit after 1 minute without holding in the knob
Lynn - October 17, 2016
👍 1 of 2 people found this instruction helpful
Tool Type
Heater
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Took the unit apart from the bottom first then pulled the fan out, all parts that needed to be replaced were accessible at this point, then just replaced each part with the new parts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
