Easy
1-2 hours
Spacer 422191040001
OEM part for: Delta
Part Number: 422191040001
$35.84
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Compatibility
This Spacer will fit the following 46 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Delta
Show More Compatible ModelsThis item works with the following types of products:
- Saw Parts
- Table Saw Parts
- Scroll Saw Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Spacer
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
30+ year old table saw @ a senior center; blade would gradually "drift" lower as it cut.
John - March 12, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Table Saw
Difficulty
Easy
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set
Parts Used
The spacer that provided tension on the rack and pinion gear set used to raise the blade had mushroomed at both ends from use causing it to be about 1/16" shorter than it should have been. This caused "run out" (slack) in the gears which would manifest by the blade lowering itself during a cut. This is the 10" contractor saw; cast iron table and 54" fence. To fix this spacer you must disassemble the saw completely.
1. Unplug your saw and remove the blade.
2. Remove outfeed tables and add-on extension tables.
3. Remove the fence.
4. Remove the belt and motor (spring loaded pins). Remove switches & wires.
5. Separate the saw from the stand (legs).
6. Flip the saw upside down. Get some help! It is HEAVY.
7. Take several reference pictures with your phone before you begin disassembly.
8. Take the frame off the table (4 - 1/2" bolts)
9. Take the frame apart until you get to the angle pointer.
10 The spacer will go through a hole in the pointer.
11. If the spacer is mushroomed on both end as ours was, take it to the bench grinder.
12. Grind the mushroomed metal off one end of the spacer until you can remove it.
13. Install the new spacer and retrace steps 9-1
NOTE: This will be easier if you have been inside something like this before. If you are a newbie at this take pictures at each step as you disassemble so you don't get lost putting it back together.
1. Unplug your saw and remove the blade.
2. Remove outfeed tables and add-on extension tables.
3. Remove the fence.
4. Remove the belt and motor (spring loaded pins). Remove switches & wires.
5. Separate the saw from the stand (legs).
6. Flip the saw upside down. Get some help! It is HEAVY.
7. Take several reference pictures with your phone before you begin disassembly.
8. Take the frame off the table (4 - 1/2" bolts)
9. Take the frame apart until you get to the angle pointer.
10 The spacer will go through a hole in the pointer.
11. If the spacer is mushroomed on both end as ours was, take it to the bench grinder.
12. Grind the mushroomed metal off one end of the spacer until you can remove it.
13. Install the new spacer and retrace steps 9-1
NOTE: This will be easier if you have been inside something like this before. If you are a newbie at this take pictures at each step as you disassemble so you don't get lost putting it back together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
