eReplacementParts.com
877-346-4814
Ryobi Parts
Repair Parts Home  Lawn Equipment Parts  Ryobi Parts  738-0372B Shoulder Spacer, 1.0 X .38 X .

Install
Videos!
Shoulder Spacer, 1.0 X .38 X . - 738-0372B:Ryobi 360 View
Shoulder Spacer, 1.0 X .38 X . - 738-0372B:RyobiShoulder Spacer, 1.0 X .38 X . - 738-0372B:RyobiShoulder Spacer, 1.0 X .38 X . - 738-0372B:RyobiShoulder Spacer, 1.0 X .38 X . - 738-0372B:Ryobi 360 View

Shoulder Spacer,​​ 1.​​0 X .​​38 X .​​ 738-0372B

Part Number: 738-0372B
RyobiMTDYard MachinesBolensYard ManCraftsmanTroy-BiltCub CadetHusky
Availability: In Stock
Price: $9.22
Order within the next 8 hours
and your part ships today!

*This part replaces obsolete part #: 738-0372, 738-0372, 738-0372A and 938-0372.

Product Information
Description:
This is a genuine replacement part manufactured for use with lawn and garden equipment. The shoulder spacer has different applications depending on the model of equipment. This shoulder spacer is available as an individual replacement part, please see the model diagram for part location and usage.
Frequently Purchased With
Compatibility

This part is compatible with the following machines:

Ryobi
MTD
Yard Machines
Bolens
Yard Man
Expand the 150+ compatible machines
Products Compatibility

This item works with the following types of products:

  • • Lawn Tractor
  • • Snowblower

Questions & Answers for Shoulder Spacer,​ 1.​0 X .​38 X .​


No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Lawn Mower
Parts Used:
Ring-retaining - 691265
Fuel Filter - 84001895
Shoulder Spacer, 1.0 X .38 X . - 738-0372B
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set
starter motor gear fell off
remove starter
install parts on starter
reinstalled starter
started lawn tractor a couple times
c-clip failed making all the starter parts fall off
order new starter motor as the motor shaft was bad
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Mower
Parts Used:
Shoulder Spacer, 1.0 X .38 X . - 738-0372B
Nut-hex Lock - 912-0431
Pulley:idler:flat - 756-04224
Repair Difficulty:
Hard
Time Spent Repairing:
1-2 hours
Tools Used:
Socket set, Wrench Set
Idler Pulley seemed wore out.
1. Cut hole in floorboard to get to nut. (some mowers have a panel to remove)
2. Raised back end of the mower on a lift.
3. Took off the pulley with 1/2 inch socket on nut and 1/2 inch wrench on bolt. Took off pulley, belt, and hardware,
4. Put on new pulley, shoulder spacer, flange nut and belt at same time.
5. Ground down hole in floorboard smooth. Covered with duct tape til figure out permanent cover.
6. Should have adjusted variable speed pedal while idler was apart, but didn't think of it at the time.
7. Later will adjust variable speed idler the long way per manual.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Lawn Tractor
Parts Used:
Shoulder Spacer, 1.0 X .38 X . - 738-0372B
Bearing-hex Flange - 941-0656A
Washer-flat - 736-3084
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set
Missing parts
I removed the steering shaft nut and gear, installed the hex flange bearing, gear, washer, and nut.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
eReplacementParts.com
7174 South 400 West
Suite 5
Midvale, UT 84047
visa mastercard discover american express PayPal