Install
Videos!

Shaft- Rocker Arm - 14461-ZL8-000:Honda 360 View

Watch The
Repair Video

Shaft- Rocker Arm 14461-ZL8-000

Part Number: 14461-ZL8-000

Ships within 1 business day

Questions & Answers

Repair Instructions

Product Information

Description:

This high-quality part is made of metal and is priced individually. The rocker arm shaft attaches to the in valve rocker arm. A set of pliers, a socket set, and a screwdriver might be necessary during the installation of this part. It will need to be replaced if it becomes broken. This part is a genuine OEM sourced part which is specifically designed for use with Honda and Toro small engines.

Warning: California's Proposition 65

Frequently Purchased With

Valve Rocker A..
$7.10

Screw- Tappet ..
$3.99

Valve Rocker A..
$6.93

Nut- Tappet Ad..
$4.99

O-ring - 6.8x1..
$4.99

Air Cleaner El..
$7.06

Compatibility

This part is compatible with the following machines:

Honda

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Engine

Questions & Answers for Shaft- Rocker Arm

Sort by

No questions have been asked yet

Repair Instructions: Submitted by Customers Like You

Tool Type:

Engine

Parts Used:

Valve Rocker Arm - 14431-Z0J-000

Valve Rocker Arm - 14441-Z0J-000

Shaft- Rocker Arm - 14461-ZL8-000

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Pliers, Socket set, Wrench Set

Rocker arm was fractured

Removed rocker arm cover. Removed rocker arm pins. Replaced rocker arms, installed pins. Sealed rocker arm cover.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Valve Rocker Arm - 14441-Z0J-000

Shaft- Rocker Arm - 14461-ZL8-000

Screw- Tappet Adjusting - 90012-333-000

Nut- Tappet Adjusting - 90206-001-000

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Socket set, Wrench Set, feeler gage

cracked rocker arm on exhaust valve -- common problem on Honda GCV190 engines

removed spark plug
removed valve cover
rotated engine to Top Dead Center (TDC)
pulled rocker arm pin (easy) and removed rocker arm
Installed tappet screw and nut on new rocker arm
Installed rocker arm and pin
set gap by adjusting tappet screw and nut (.08 inch for my engine)
checked gap on intake valve (it was fine)
Installed valve cover and spark plug
Easy, peasy

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Shaft- Rocker Arm - 14461-ZL8-000

Screw- Tappet Adjusting - 90012-333-000

Nut- Tappet Adjusting - 90206-ZM3-000

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers, Feeler gauge

Tappet cracked

I had slip the adjusting bolt o and put the nut to hold it on to the tappet. I slid the pin in place to hold the tappet. Turn the engine to get the piston on top and set the tappet to correct gap. Tighten bolt and put the head cover in place.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Shaft- Rocker Arm - 14461-ZL8-000

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers, Wrench Set, Feeler gage

Timing not set correctly on pressure washer and caused rocker arm pin to severly ware

Replaced the pin and reset the lash adjustment to the specs and correctly set the timing

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Valve Rocker Arm - 14441-Z0J-000

Shaft- Rocker Arm - 14461-ZL8-000

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers, Socket set

Valve rocker broke in the engine on pressure washer

Removed valve cover assembly and crank rope assembly removed old bad rocker, replace with new valve rocker and shaft

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Product Information