Medium
15-30 minutes
This screw is a genuine OEM sourced replacement part that is specially produced for Black and Decker and Dewalt reciprocating hand saws. It is generally used to secure the blade clamp assembly. Please note, this torx screw is sold individually.
Screw 577359-00
OEM part for: DeWALT, Black and Decker
Part Number: 577359-00
$4.99
In Stock
Order within the next 5 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 7 machines
Black and Decker
PHS550G Type 1 Reciprocating Saw View Diagrams & Manuals
PHS550B Type 1 Reciprocating Saw View Diagrams & Manuals
SC500G Type 1 Reciprocating Saw View Diagrams & Manuals
SC500 Type 1 Hand Saw View Diagrams & Manuals
SC500 Type 4 Hand Saw View Diagrams & Manuals
SC500K (Type 4) Navigator With Kitbox View Diagrams & Manuals
PHS550B (Type 2) Handsaw Power Tool View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Reciprocating Saw Parts
- Saw Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Screw
How many screws are in a order?
Sherwood
for model number SC500
asked on 2022-12-03
Hello Sherwood, Thank you for your inquiry. We show that these screws are sold individually. Good luck with your repair.
eReplacementParts Team December 03, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Screws to hold on the blade clamp assembly had sheared off. Replaced blade clamp assembly with new part and new screws.
Norbert - April 12, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Reciprocating Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
, Security torx
1 Removed outer housing.
2 Loosened the motor to lift it up.
3 Installed new blade clamp assembly.
4 Reassembled pouter housing
Note: need the special SECURITY TORX screw driver.
2 Loosened the motor to lift it up.
3 Installed new blade clamp assembly.
4 Reassembled pouter housing
Note: need the special SECURITY TORX screw driver.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
broken blade clamp
Bruce - August 27, 2021
Tool Type
Reciprocating Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, torque bits
removed cover.
Found broken part.
Ordered correct parts.
Replaced broken clamp.
Reassembled saw.
Found broken part.
Ordered correct parts.
Replaced broken clamp.
Reassembled saw.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The screws for the blade clamp assembly broke off in the clamp.
Michael - July 6, 2021
Tool Type
Reciprocating Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Torx Security Screwdriver
1. Remove screws from saw case. (Security Torx Screws)
2. Remove one case cover. Do not lose the trigger spring.
3. Loosen 2 screws holding motor assemble in case. Lift up assemble to access the screw hole in the bar.
4. Replace Seal as needed.
5. THE SLEEVE BEARING WILL NOT FIT ON THE BAR. THE BAR IS TOO WIDE.
6. Place 2 screws through bar holes.
7. Tighten screws into blade clamp assembly.
8. Re-tighten motor assembly.
9. Replace cover making sure trigger spring is in place.
10. Replace case cover screws.
11. Note that new assembly does not hold blade as well as the original assembly.
2. Remove one case cover. Do not lose the trigger spring.
3. Loosen 2 screws holding motor assemble in case. Lift up assemble to access the screw hole in the bar.
4. Replace Seal as needed.
5. THE SLEEVE BEARING WILL NOT FIT ON THE BAR. THE BAR IS TOO WIDE.
6. Place 2 screws through bar holes.
7. Tighten screws into blade clamp assembly.
8. Re-tighten motor assembly.
9. Replace cover making sure trigger spring is in place.
10. Replace case cover screws.
11. Note that new assembly does not hold blade as well as the original assembly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Blade Clamp Assembly cracked and seperated
Ben - March 18, 2019
Tool Type
Reciprocating Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
Disassembled housing, removed clamp assembly screws, replaced assembly with new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
B&D Navigator screws holding blade clamp assembly sheared--
Edwin - October 25, 2018
Tool Type
Reciprocating Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Used pliers to remove the sheared screws and reattached new assembly with the new screws. Could've used the old assembly, but decided to replace it to be sure of structural integrity and fit of new self-tapping screws. Pretty simple.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Blade clamp broke
Larry - September 27, 2016
Tool Type
Reciprocating Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Torx screw diver
Removed the screws from the housing. Removed one half of the housing. Remove the screws from the blade shaft. I removed the blade clamp, the clip and lock pin. I then put the new lock pin into the blade clamp put the spring on then the clip. Then screw the clamp assembly to the blade shaft. and put the housings together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The assembly that holds the blade had broken off the shaft that attaches to the motor
Karl - January 16, 2016
Tool Type
Reciprocating Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Nutdriver
Open the case. Screw the replacement part in place. Close and screw the case shut.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
