Easy
Less than 15 minutes
This a genuine OEM sourced replacement part used on Bosch sanders. This is a foam backing pad which is sold Individually.
Over time this part we wear out and will need to be replaced. Changing the pad is easy and will only require a screwdriver.
• First remove screws that secure the pad
• Remove old pad and replace it with the new one
• Secure it using the screws
Sander Pad 2610920628
OEM part for: Bosch
Part Number: 2610920628
$8.35
In Stock
Ships within 1 business day 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.10 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 3 machines
Bosch
1297 (3601B97039) Orbital Sander View Diagrams & Manuals
1297D (0601297039) Orbital Sander View Diagrams & Manuals
1297DK 1/4 Sheet Finishing Sander View Diagrams & Manuals
This item works with the following types of products:
- Sander Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
0
2 stars
0
1 stars
2
< PREV
- 1
quality
fast delivery; just what my sander needed
Guest -
September 22, 2021
Verified Purchase
Great part
The part was in perfect condition and was an exact match.
Guest -
December 24, 2020
Verified Purchase
Perfect fit
Installed easily and fit perfectly.
Guest -
September 8, 2020
Verified Purchase
what can I say it got here faster than expected
fit like a glove :)
Guest -
November 14, 2019
Verified Purchase
Easy Replacement
It was a relatively simple process to find the parts I needed for my sander. It arrived quickly and was easy to replace.
Guest -
August 14, 2019
Verified Purchase
Part didn't fit
Part didn't fit
Guest -
July 5, 2023
Verified Purchase
Sender Pad and 2 rubber bars for Bosh 1297D sender
rubber bars are to short only 3 1/2 inch instead of 4 inch at least.
You have a wrong description on your side. I have no use for them.
Looking for the right parts...
Guest -
May 15, 2020
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Sander Pad
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Sander would not hold sandpaper
Stephen - May 11, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Replaced both the pad and front rubber piece and sander works like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Would not hold the paper in place. Pad was worn and sticky
Delmore - October 9, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Sander
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver, side cutter, file
Parts Used
It was a simply replacement. Look at the original and replace to match it. After that it was simply tight up 4 screws. Works great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sander pad worn out
anne - October 2, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Unscrewed the old pad and replaced it with the new one. Easy!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Worn sander pad & rubber bar would not secure sand paper.
DAVIS - May 13, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, None
Parts Used
Unplug the sander before working on it.
Remove phillips head screws, take old pad off, insert new pad & reinstall screws.
Rubber bar must be stretched over metal plate; one must hold down the open button. It takes patience since the rubber bar must fit around all edges of the metal plate.
Replacing the sander pad & rubber bar is done.
Remove phillips head screws, take old pad off, insert new pad & reinstall screws.
Rubber bar must be stretched over metal plate; one must hold down the open button. It takes patience since the rubber bar must fit around all edges of the metal plate.
Replacing the sander pad & rubber bar is done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Pad wore out
William - October 27, 2018
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed screws and replaced pad. Less than 5 minutes
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Just worn out
Kerry - July 31, 2018
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Just remove the screws, replace the pad< put the screws back in. pretty self explaining.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sander pad was worn out
PAUL - July 12, 2018
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1. Removed screws holding the old sander pad
2. Removed pad and replaced with the new one
3. Replaced screws holding the new sander pad
2. Removed pad and replaced with the new one
3. Replaced screws holding the new sander pad
Did you find this story helpful?
Thanks for voting and helping fellow customers!
It would not hold the sand paper.
Frank - June 3, 2018
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
1. Replaced sander pad which was worn.
2. Replaced clamping bar which was worn.
3. Replaced rubber bar which was worn.
Sander works perfectly now.
2. Replaced clamping bar which was worn.
3. Replaced rubber bar which was worn.
Sander works perfectly now.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Wouldn't hold paper anymore.
joel - May 25, 2018
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed 4 screws holding sander pad to base. Then removed two small screws holding clamping bar to base and placed new one into place replacing small screws. Added new pad to the bottom of base and replaced 4 screws. Done deal
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sander pad worn
HOWARD - April 6, 2018
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Remove 4 screws & replace pad about 5 min
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
