Easy
15-30 minutes
This is a genuine Craftsman replacement part. It is commonly used in snowblowers. This part works with the auger assembly to transfer the snow through the machine and out the chute. This pad is made of rubber and is a major stress point. It should be checked seasonally for wear and tear to be replaced accordingly. The repair for this part is very simple. A screwdriver is needed to remove the hex washer screw holding it in place. It is sold individually.
Rubber Paddle 735-04033
OEM part for: Ryobi, MTD, Yard Machines, Bolens, Yard Man, Craftsman, Troy-Bilt, Husky
Part Number: 735-04033
$8.43
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Rubber Paddle will fit the following 375 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
MTD
Yard Machines
Bolens
Yard Man
Craftsman
Troy-Bilt
Husky
Ryobi
Show More Compatible ModelsThis item works with the following types of products:
- Snowblower Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Rubber Paddle
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Replace paddles
Alan - March 31, 2017
👍 2 of 2 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
Removed the old paddles
Installed the new paddles
Installed the new paddles
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 Rubber spiral crescents and 2 rubber paddles were worn out.
Randy - November 4, 2022
Tool Type
Snowblower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Socket set
Very easy to replace the rubber parts on my Troy-Bilt snowthrower. All were exactly the same as the worn out ones so I am extremely satisfied.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Auger yoke between the gear box and 2 stage auger has two paddles that connect the two. The original paddle ripped and they do not make them. Used these to improvise by layering them to make the corre
Brian - February 23, 2019
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Wrench Set, Na
Parts Used
Removed the 2 old paddles and installed the mtd ones
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Paddles just wore out.
Ernest - January 31, 2018
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Power Drill
Removed the old paddles and installed the new ones. Machine works as good as when it was new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Had a problem with snow not being thrown up and out
Brian - February 3, 2017
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Wrench Set
Parts Used
I put the blower on the tailgate of my truck, unscrew two bolts from 1of the pads,Lined up the new pad and proceeded to insert the screws and tighten them equally.
Then did the same to the next paddle.
Then did the same to the next paddle.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Rubber paddles wore out
Daniel - December 14, 2016
👍 1 of 2 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Replaced paddles, perfect fit!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Replace worn parts
Donald - November 19, 2016
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set
Remove the old auger pales and center paddles
Install the new paddles
Remove the the old shave plate
And install the new on about 1/8 inch to 1/4 inch above the ground
Install the new paddles
Remove the the old shave plate
And install the new on about 1/8 inch to 1/4 inch above the ground
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
