Easy
Less than 15 minutes
The roller attaches to the cover with the washer and the cap screw. This part is an OEM from Delta for use in stock feeder shapers. It is made out of metal and hard rubber and will need to be replaced if it stops turning. An allen wrench will be needed to replace this wheel. Keep in mind that this part is available as an individual replacement even though multiple rollers may be needed.
Roller 1340360
OEM part for: Delta
Part Number: 1340360
$62.28
In Stock
Ships within 1 business day 
Compatibility
This part will fit the following 3 machines
Delta
36-850 Type 1 Stock Feeder Shaper View Diagrams & Manuals
36-850 Type 2 Stock Feeder Shaper View Diagrams & Manuals
34-985 Type 1 Stock Feeder View Diagrams & Manuals
This item works with the following types of products:
- Shaper Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Roller
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Stock feeder wheels
Chris - May 3, 2019
👍 1 of 1 people found this instruction helpful
Tool Type
Shaper
Difficulty
Medium
Time
15-30 minutes
Tools Used
Power Drill, Allen wrench
Parts Used
The wheels seem like cheap knock offs. The holes for the bolts were to small I had to drill them out so the bolts would fit. I could have got them cheaper somewhere else but I thought these where going to be delta parts. But they do work.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Roller rubber was bad
Daniel - October 10, 2020
Tool Type
Shaper
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set, Allen Wrench
Parts Used
1) Remove the two Allen screws on each wheel
2) Remove rollers
3) Place new rollers
4) put on the Allen screws and tighten
2) Remove rollers
3) Place new rollers
4) put on the Allen screws and tighten
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old feeder tires dried and cracked
daniel - February 25, 2019
Tool Type
Shaper
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
1. Removed old tires.
2. Placed in trash
3. Attached new tires
4. Danced a jig
2. Placed in trash
3. Attached new tires
4. Danced a jig
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
