Watch The
Repair Video

Ring Set-Standard

Part Number: 298982

Order within the next 7 minutes

and your part ships today!

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: 555088 and 299742.

Product Information

Manufacturer: Briggs and Stratton, Toro

Product Number: 298982

Classification: Part

Weight: 0.07 lbs.

Shipping: Ships Worldwide

Description:

This is sold as a set that contains three rings. The rings attach to the piston and help to create a seal. When replacing these parts a screwdriver, a set of pliers, and a socket set might all be required during the installation process. These parts are made out of metal and will need to be replaced if they break or bend. They are authentic Briggs & Stratton and Toro replacement parts that are sourced from the original manufacturer for use with engines, generators, tillers, and blower-vacuums.

Warning: California's Proposition 65

Compatibility

This part is compatible with the following machines:

Briggs and Stratton

91200 Series (0002-1385) Engine
90700 Series Engine
91700 Series Engine
9C900 Series Engine
92500 Series Engine
92900 Series Engine
135230 Series Engine
133230 Series Engine

9446-2 2,400 Watt Generator
9446-1 2,400 Watt Generator
9446-0 2,400 Watt Generator
9115-0 2,400 Watt Generator
9084-0 2,400 Watt Generator
8965-2 2,400 Watt Generator
8965-1 2,400 Watt Generator
8965-0 2,400 Watt Generator

Toro

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Blower
• Engine
• Generator
• Vacuum

Questions & Answers

Sort by

Where do I find model number I have a 17.5hp briggs

Matt asked on 2019-12-29

Good Day Matt. The model number will be 11 or 12 digits and can be found in one of many locations, including: by the starter, on the cylinder shield, on the metal shield, on the valve cover, above the spark plug, in front of the engine, above the muffler, or on the fuel tank. Hope this helps. Best Regards.

Did this question help you?

I have a 5 hp engine horizontal shaft built in 70's I need rings for don't have model # piston measures 2.5 inches could you give me part #

rick asked on 2019-12-22

Hello Rick and thanks for writing. We cannot find parts based on part dimensions as even parts that are the same size can have small differences that make them incompatible with your model. We strictly match parts to models. Thank you for your question and good luck with your repair! It is possible that part # 298982 might work with your unit; however, as we do not have your model number in our database we can not guarantee the fit. We hope this helps. Please contact us anytime.

Did this question help you?

Repair Instructions: Submitted by Customers Like You

1 of 2 people found this instruction helpful

Tool Type:

Engine

Parts Used:

Ring Set-Standard - 298982

Repair Difficulty:

Easy

Time Spent Repairing:

1-2 hours

Tools Used:

Screwdriver, Pliers, Socket set, Wrench Set

Motor needed a overhaul

1. Pulled motor off tiller
2. Tore motor down to check it out
3. Called ereplacementparts to order all parts I needed
4. Give cylinder good hone and lapped the valves back in and cleaned block up good
5. When rebuild kit came in I just installed and motor runs good

Did you find this story helpful?

Thanks for voting and helping fellow customers!

0 of 1 people found this instruction helpful

Tool Type:

Engine

Parts Used:

Oil Seal - 299819S

Seal-Oil - 691952

Ring Set-Standard - 298982

Gasket-Crkcse (.015 Thick)(Stand) - 692213

Cylinder Head Gasket - 272157S