Product Information
Description:
This is an authentic Bosch replacement part manufactured for use with miter saws. This metal fence is adjustable to allow for bevelled angle cuts. The right side sliding fence fits onto the main fence and is sold individually. |
Compatibility
the 19 compatible machines
This part is compatible with the following machines:
Bosch
4412 (0601665039) 12" Miter Saw
4412 (0601665039) 12" Miter Saw
4212L () 12" Dual-Bevel Upfront Control & Laser Tracking Compound Miter Saw
4212L () 12" Dual-Bevel Upfront Control & Laser Tracking Compound Miter Saw
5412L (0601665239) 12" Laser Tracking Dual-Bevel Slide Miter Saw
5412L (0601665239) 12" Laser Tracking Dual-Bevel Slide Miter Saw
4212 (060166F035) Miter Saw
4212 (060166F035) Miter Saw
4212L (060166F239) Miter Saw
4212L (060166F239) Miter Saw
4412 (0601665039) 12" Miter Saw
4212L () 12" Dual-Bevel Upfront Control & Laser Tracking Compound Miter Saw
4212L () 12" Dual-Bevel Upfront Control & Laser Tracking Compound Miter Saw
5412L (0601665239) 12" Laser Tracking Dual-Bevel Slide Miter Saw
5412L (0601665239) 12" Laser Tracking Dual-Bevel Slide Miter Saw
4212 (060166F035) Miter Saw
4212 (060166F035) Miter Saw
4212L (060166F239) Miter Saw
4212L (060166F239) Miter Saw
5412 (0601665239) 12 in. Dual-Bevel Slide Miter Saw
5412 (0601665239) 12 in. Dual-Bevel Slide Miter Saw
5412 (06016651A9) 12 in. Dual-Bevel Slide Miter Saw
5412 (06016651A9) 12 in. Dual-Bevel Slide Miter Saw
5312 12" Dual-Bevel Slide Miter Saw
5312 12" Dual-Bevel Slide Miter Saw
4412 (0601665139) Table Saw
4212 (060166F222) Miter Saw
GCM12SD (0601B23537) Slide Mitre Saw
5412 (0601665239) 12 in. Dual-Bevel Slide Miter Saw
5412 (06016651A9) 12 in. Dual-Bevel Slide Miter Saw
5412 (06016651A9) 12 in. Dual-Bevel Slide Miter Saw
5312 12" Dual-Bevel Slide Miter Saw
5312 12" Dual-Bevel Slide Miter Saw
4412 (0601665139) Table Saw
4212 (060166F222) Miter Saw
GCM12SD (0601B23537) Slide Mitre Saw
Products Compatibility
This item works with the following types of products:
- • Miter Saw
- • Saw
Questions & Answers for Right Sliding Fence
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Miter Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, None
Replaced worn out parts
Remove and reverse process to replace. Very simple
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set, allen wrench
Somehow the fence and stop got bent. How I don't know.
I took off both fences first, then took out the four bolts that held the backstop in place. Then I put the new backstop in place. I then pushed the backstop all the way back on the slotted holes and squared it to the base. I then took scrape wood and made a picture frame to check for square, everything looked good after that. Note I always check the square of the blade to the base before using my saw, anything can move. Well that's about all I can tell you and thanks for your fast service. Howard.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information