Medium
30-60 minutes
This is a genuine item that is supplied by the original equipment manufacturer for use with Kohler faucets. It is an identical replacement for a missing or a faulty retaining ring that was included with a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.
Retaining Ring 75564
OEM part for: Kohler
Part Number: 75564
$9.97
In Stock
Order within the next 1 hour and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 8 machines
Kohler
K-158-3 Antique Kitchen Sink Faucet View Diagrams & Manuals
K-377-4M Finial Traditional Kitchen Sink Faucet View Diagrams & Manuals
K-16109-4 Kitchen Sink Faucet View Diagrams & Manuals
K-8761 Kitchen Sink Faucet View Diagrams & Manuals
K-8762 Kitchen Sink Faucet View Diagrams & Manuals
K-8763 Kitchen Sink Faucet View Diagrams & Manuals
K-10430 Kitchen Sink Faucet View Diagrams & Manuals
K-10441 Entertainment Sink Faucet View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Faucet Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Retaining Ring
What size Slip Ring Plyer is required to extract this part from Kohler Revival Kitchen Faucet K16109. I don't have "Steel Probes" like another posting.
Scott
for model number Kohler 75564
asked on 2023-11-20
Hello Scott, Thank you for reaching out. Since the Retaining Ring tools are too large, most customers use needle nose pliers. We hope this helps!
eReplacementParts Team November 20, 2023
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Sprayer diverted valve not working
JOHN - September 21, 2023
Tool Type
Faucet
Difficulty
Medium
Time
30-60 minutes
Tools Used
Pliers
Parts Used
Replaced diverted valve.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Worn diverter valve in sick faucet that redirects water to hand sprayer.
Robert - December 21, 2018
Tool Type
Faucet
Difficulty
Medium
Time
30-60 minutes
Tools Used
Pliers, Allen Wrench, Needle&Split Ring Pliers and small metal picks
1. I reviewed the parts diagrams for my single handle kitchen sink faucet assembly, manufactured by Kohler, Part Number K-10441, on the e-Replacement web site. The Kohler K-10441 is very similar to the Kohler Forte K-10430 kitchen faucet in construction.
2. I then located what where hand spray diverter valve was located. I had assumed the diverter valve was in the remote faucet value housing, but instead found the diverter within the faucet spout.
3. Since the faucet water control valve was mounted separately from the faucet spout, I did not turn off the hot and cold-water supply valves under the sink. Next, I removed the Allen set screw on the faucet spout and carefully lifted the spout from the faucet spout core body assembly. A small amount water is normally within the faucet spout and emptied onto the sink lip.
4. Next, I removed the small spit ring in the faucet neck assembly. I found my split ring plier jaw points were too big to grasp the split ring end holes. Instead I used two small straight end stainless steel probes to carefully compress and remove the split ring without damage to the split ring or the faucet assembly core.
5. Then I located the diverter valve and attempted to remove it with small needle nose pliers. The diverter valve was stuck and could not be removed without possible damage to the existing diverter value. Instead I used a small 90-degree stainless steel probe to loosen the diverter valve and remove it with the small needle nose pliers.
6. I inspected the 2 O-rings and diverter value but did not see any visual problems or damage to these parts. I reused the 2 O-rings but replaced the diverter value on suspicion.
7. Next I cleaned the faucet parts with a paper towels then re-lubed all those parts with silicon grease I had removed.
8. I reinstalled the faucet spout, opened the faucet valve, checked for presence of any water leaks and tested the new diverter valve. There were no presence of any water leaks and the faucet worked again as when it was new.
My previous single handle Delta kitchen faucet had the diverter valve mounted in the value assembly not the faucet spout. My repaired Kohler kitchen faucet had the valve assembly remotely mounted within the faucet sink spout, so this repair was new for me. Thanks to the e-Replacement web site and their replacement parts diagrams with the associated part numbers. The replacement parts including shipping were far less in cost than a new kitchen sink faucet, and the elapsed time between parts ordering and receipt was only a few days.
2. I then located what where hand spray diverter valve was located. I had assumed the diverter valve was in the remote faucet value housing, but instead found the diverter within the faucet spout.
3. Since the faucet water control valve was mounted separately from the faucet spout, I did not turn off the hot and cold-water supply valves under the sink. Next, I removed the Allen set screw on the faucet spout and carefully lifted the spout from the faucet spout core body assembly. A small amount water is normally within the faucet spout and emptied onto the sink lip.
4. Next, I removed the small spit ring in the faucet neck assembly. I found my split ring plier jaw points were too big to grasp the split ring end holes. Instead I used two small straight end stainless steel probes to carefully compress and remove the split ring without damage to the split ring or the faucet assembly core.
5. Then I located the diverter valve and attempted to remove it with small needle nose pliers. The diverter valve was stuck and could not be removed without possible damage to the existing diverter value. Instead I used a small 90-degree stainless steel probe to loosen the diverter valve and remove it with the small needle nose pliers.
6. I inspected the 2 O-rings and diverter value but did not see any visual problems or damage to these parts. I reused the 2 O-rings but replaced the diverter value on suspicion.
7. Next I cleaned the faucet parts with a paper towels then re-lubed all those parts with silicon grease I had removed.
8. I reinstalled the faucet spout, opened the faucet valve, checked for presence of any water leaks and tested the new diverter valve. There were no presence of any water leaks and the faucet worked again as when it was new.
My previous single handle Delta kitchen faucet had the diverter valve mounted in the value assembly not the faucet spout. My repaired Kohler kitchen faucet had the valve assembly remotely mounted within the faucet sink spout, so this repair was new for me. Thanks to the e-Replacement web site and their replacement parts diagrams with the associated part numbers. The replacement parts including shipping were far less in cost than a new kitchen sink faucet, and the elapsed time between parts ordering and receipt was only a few days.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Leak at base of faucet
Arthur - September 28, 2018
Tool Type
Faucet
Difficulty
Medium
Time
30-60 minutes
Tools Used
Pliers, Adjustable Wrench, Allen wrench
Removed faucet head, replaced worn parts, replaced faucet head
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
