Push Rod 592673 - OEM Briggs and Stratton

Description:

This replacement push rod is specially designed for use on Briggs and Stratton engines. It is an authentic part supplied directly from original equipment manufacturer. The push rod is connected to the camshaft to push the exhaust valve open during the exhaust stroke. A bent rod can not only affect your engine's performance, it can seriously damage other parts if the problem is not taken care of immediately. Please note, this assembly includes the (1) push rod and (1) tappet valve.

Frequently Purchased With

Rocker Cover G..
$7.35

Gasket-Crankca..
$9.21

Gasket Set-Val..
$32.65

Compatibility

This part is compatible with the following machines:

Briggs and Stratton

20E114-0702-E1 Engine
20E114-0927-E1 Engine
20E214-0015-E1 Engine
20E214-0110-E1 Engine
20E214-0111-E1 Engine
20E214-0112-E1 Engine
20E214-0113-E1 Engine
20E214-0118-E1 Engine
20E214-0119-E1 Engine
20E214-0358-E1 Engine
20E214-0359-E1 Engine
20E337-0110-E1 Engine
20E412-0100-E1 Engine
20E414-0162-E1 Engine
20E414-0163-E1 Engine
20E414-0204-E1 Engine
20F412-0100-E1 Engine
20F412-0105-E1 Engine
20F414-0017-E1 Engine
20F414-0019-E1 Engine
20F414-0112-E1 Engine
20F437-0113-E1 Engine
20F437-0114-E1 Engine
20G412-0100-E1 Engine
20H132-0110-B1 Engine
20H132-0110-E9 Engine
20H132-0111-B1 Engine
20H132-0111-E9 Engine
20H132-0114-B1 Engine
20H132-0114-E9 Engine
20H132-0117-B1 Engine
20H132-0117-E9 Engine
20H132-0118-B1 Engine
20H132-0118-E9 Engine
20H132-0120-B1 Engine
20H132-0120-E9 Engine
20H132-0121-B1 Engine
20H132-0121-E9 Engine
20H132-0122-B1 Engine
20H132-0122-E9 Engine
20H132-0130-B1 Engine
20H132-0133-B1 Engine
20H132-0137-H1 Engine
20H136-0126-B1 Engine
20H136-0126-E9 Engine
20H137-0119-B1 Engine
20H137-0119-E9 Engine
20H137-0124-B1 Engine
20H137-0124-E9 Engine
20H137-0125-B1 Engine
20H137-0129-B1 Engine
20H137-0131-B1 Engine
20H137-0132-B1 Engine
20H137-0136-B1 Engine
20H137-0138-H1 Engine
20H232-0122-B1 Engine
20H232-0124-B1 Engine
20H232-0126-B1 Engine
20H232-0128-B1 Engine
20H232-0134-B1 Engine
20H232-0135-B1 Engine
20H237-0113-B1 Engine
20H237-0113-E9 Engine
20H237-0115-B1 Engine
20H237-0123-B1 Engine
20H237-0125-B1 Engine
20H237-0127-B1 Engine
20H237-0127-H7 Engine
20H237-0131-B1 Engine
20H237-0132-B1 Engine
20H237-0133-B1 Engine
20L132-0110-G1 Engine
20L132-0111-F1 Engine
20L132-0112-F1 Engine
20L132-0115-F1 Engine

Expand the 150+ compatible machines

Repair Instructions: Submitted by Customers Like You

Tool Type:

Engine

Parts Used:

Rocker Cover Gasket - 690971

Push Rod - 592673

Plug--Spark - 793541

Repair Difficulty:

Easy

Time Spent Repairing:

1-2 hours

Tools Used:

Socket set, Adjustable Wrench

Motor turned over would not fire

Removed mouse nest, replaced push rods.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Push Rod - 592673

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Pliers, Socket set

Bent Push Rod

Removed valve cover and removed rocker.

Replaced push rod. I did not replace the tappet due to not wanting to remove the head

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Push Rod - 592673

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Socket set, Wrench Set, Feeler gauge

Push rods bent and broken

Remove tapped cover
Loosen tappet adjusting nut
Remove damaged push rods
Reinstall new push rods
Remove spark plug and set piston at 1/4" past top dead center on exhaust stroke
Tighten push rod adjusting nut to set free play gap specified by manufacturer
Pull engine over and reset piston position and check and or reset free play
Replace tappet cover and gasket if necessary

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 4 people found this instruction helpful

Tool Type:

Lawn Tractor

Parts Used:

Adjuster-Rocker Arm - 690083

Push Rod - 592673

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Socket set, Wrench Set, Feeler gauges and Torx bits

Bent push-rod.

Removed the valve cover then the rocker arm to check it. Removed the push rod and put in the new one along with the new adjuster nut. Brought the engine to top dead center and adjusted the valve lash to 5mm. Replaced the valve cover.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

0 of 1 people found this instruction helpful

Tool Type:

Lawn Tractor

Parts Used:

Rocker Cover Gasket - 690971

Push Rod - 592673

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers, Power Drill, Socket set, Wrench Set, Nutdriver

Bent and broken push rods

Removed valve cover and removed and replaced push rods.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

4 Reviews

Click to filter by ratings:

5 stars

3

4 stars

1

3 stars

0

2 stars

0

1 stars

0

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Great repair

Fast shipping and right part

Guest - June 12, 2023 Verified Purchase

Pushrod, this was the correct item.

Item arrived in great condition.

Calvin - December 4, 2021 Verified Purchase

Gr8 part work out good thx

Thx gr8 part

Guest - October 3, 2021 Verified Purchase

Good value merchandise and excellent service.

Good parts. All worked as planned. Thanks!

Gene R - November 12, 2022 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >