fancyboxy
eReplacementParts.com
866-322-9842
Bosch Parts
Repair Parts Home  Power Tool Parts  Bosch Parts  1619X08527 Power Cord

Power Cord

Part Number: 1619X08527
SkilBosch
Availability: 25+ in stock
Price: $15.62
Quantity:
Ships within 1 business day

*This part replaces obsolete part #: 1619X01570, 2610914296 and 2610991862.

Product Information
Manufacturer: Skil, Bosch
Product Number: 1619X08527
Classification: Part
Weight: 0.87 lbs.
Also Known As: AC Cord, Power Supply Cord, Cord Set, Electric Cord
Shipping: Ships Worldwide
Specifications
  • O.E.M. Skil/Bosch replacement power cord
  • Three wires (includes ground wire)
  • 8 Feet. 14 gauge, 3 wire.
Description:
This power cord is a genuine Skil/Bosch replacement part, not generic. Just like the original cord on your tool, this cord is built tough. Thick insulation ensures long service life and safe electrical isolation. This is a three wire cord (includes ground plug) and connection terminals are already installed. This cord also includes a metal locking tab for a secure attachment to your tool.

This cord is compatible with the tools listed below. Because of oversize cord thickness and three wires, this cord is not guaranteed to fit any other power tools.
Products Compatibility

This item works with the following types of products:

  • • Circular Saw
  • • Saw
Questions & Answers

I need a replacement power cord for a skilsaw #HD5510 can you give me your part # for it?
Bruce
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you?re looking for is Part Number: 2610910169. Thank you for your inquiry, good luck with this repair!
skilsaw super duty ball bearing saw 77 type 15. need to replace power cord. what power cord will work for my saw.
Robert for model number Skilsaw 77 type 15
Hi Robert, Thank you for your question. Yes, this should be the correct cord. I hope that helps. Good luck with your repair.
Mine came with a 25' cord from the factory(I believe it was a 75th anniversary model) Is the 25' power cord still available as a replacement?
Chris for model number HD77M
Hello Chris, thank you for your inquiry! For model HD77M, the replacement cord 1619X08527 is 8 Feet. 14 gauge, 3 wire. I hope this information helps!
This is a Bosch dryer ( Nexxt 700series ) can I replace a 4 wire power cord , with a 3 wire power cord
Mike Cruz for model number Nexxt 700 series
Hello Mike, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Nexxt 700 series is just part of the name of the appliance. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Need power cord Skil circular saw model 5050
Kenny for model number 5050
Hello Kenny, thank you for your inquiry! Unfortunately, the power cord (p/n 2610313328) for your model 5050 has been discontinued with no replacement part. I apologize for the inconvenience.
Bosch saw...need power cord?...is this it?...thanks
Patrick for model number 1677M
Hello Patrick, the power cord part number 1619X08527 is the compatible part for your model. Hope this helps
Repair Instructions: Submitted by Customers Like You
5 of 6 people found this instruction helpful
Tool Type:
Circular Saw
Parts Used:
Power Cord - 1619X08527
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Power Cord Cut
1. Remove handle side plate.
2. Remove 3 Screws connecting cord.
3. Remove 2 Screws securing trigger.
4. Removed old cord and installed new cord by replacing the items above.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Circular Saw
Parts Used:
Power Cord - 1619X08527
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
Needed a new cord
Remove one handle half, Remove the cord wires from the switch and the ground wire
Remove the cord clamp. Slide the old cord relief from off of the old cord and slide it on the new cord. Connect the wires from new cord to the switch and the ground wire. Install the cord clamp. Install the handle half.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Circular Saw
Parts Used:
Cord Guard - 1619X08308
Power Cord - 1619X08527
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Bad cord on a skilsaw
Removed handle and replace cord and cord guard
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Circular Saw
Parts Used:
Ball Bearing - 2610024748
Carbon Brush Set - 1619X08020
Power Cord - 1619X08527
Armature W/ Fan - 2610931892
Repair Difficulty:
Hard
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Socket set, Wrench Set, Nutdriver, Adjustable Wrench, Bearing driver, armature jig (homemade), small impact driver
Armature commutator damaged by abrasive grit, have also done the replacement when the cooling fan shears off the armature
1. Drain oil from gearbox
2. Remove brushes
3. Remove guide plate
4. Remove large plastic plug from rear of saw
5. Remove nut behind plastic plug with impact driver while holding down while holding down saw blade stop..
6. Remove saw guide plate and front housing.
6. Press or drive armature out of gearbox brearing.
7. Install new bearing on commutator side of new armature using a simple jig to hold the armature.
8. Slide new armature into the gearbox housing.
9. Reinstall nut and carefully tighten with impact driver. This will pull the armature through the gearbox until it stops when the armature shoulder contacts the inner bearing race on the armature side of the gearbox. Take your time with this.
10. Reassemble saw.
11. Refill gearbox with oil.
12. Replace brushes.
Note: I've done this type of replacement a number of times on Skil circular saws without replacing the bearings on the gearbox side and not had any long term problems. But it is likely that Skil recommends replacing the two gearbox bearings as part of the procedure.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Circular Saw
Parts Used:
Cord Guard - 1619X08308
Carbon Brush Set - 1619X08020
Power Cord - 1619X08527
Skilsaw Worm Drive Saw Oil (8OZ) - 2610080111
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
30-year old Skilsaw needed a little maintenance. ereplacementparts were perfect.
Remove the screws from the handle assembly, then unscrew switch from handle and remove the cord clamp. Remove the cord leads from the switch and the ground wire. Discard old cord. Slide the new cord relief onto the new cord. Install the cord leads on the switch , then the ground lead. Attach switch to handle , then put the cord clamp back on. Press the handle together. Make sure there are no wires being pinched, then install the handle on to the saw. To replace the brushes. Remove the brush caps with a screwdriver, then remove the old brushes. Install the new brushes, then screw the brush caps back on. Check oil level in the saw and add more if needed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Parts Used:
Power Cord - 1619X08527
Switch - 1619X04521
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Electric cord was old/cracked and the on/off switch would not shut off any longer
1. Removed handle, 4 screws
2. Removed switch, 1 screw
3 Installed new switch
4. Removed 3 screws to remove cord
5. Installed new cord
6. Reassembled handle
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Parts Used:
Carbon Brush Set - 1619X08020
Power Cord - 1619X08527
Lever Assembly - 2610317088
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Star bits
Cord was broke ,brushes were old, lever was broke
Dismantled handle, removed damaged cord, replaced with new... removed old brushes, replaced with new...removed broken lever, replaced with new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Parts Used:
Cord Guard - 1619X08308
Power Cord - 1619X08527
Handle - 1619X01364
Handle Assembly - 1619X01423
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set, Torks bit set and 1/4\\
Saw was dropped and fractured handles
Removed handle half on main grip, took picture for reference with phone to reference wiring on the switch, detached ground to motor case, removed switch and old cord and guard, transferred switch and attached new cord and guard to new grip half, removed old grip half and installed new grip half assembly and attached ground other new grip half and new top handle.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Parts Used:
Cord Guard - 1619X08308
Carbon Brush Set - 1619X08020
Power Cord - 1619X08527
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
A lot of sparking in the motor; short cord.
Removed covers for brushes then replaced old brushes with new ones. Removed screws from handle assembly then removed screws holding terminals on old power cord. Replaced old cord with new one and replaced the screws. My vintage Skilsaw 825 worm drive is ready for another 50 years of use!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Parts Used:
Power Cord - 1619X08527
Pistol Grip Handle - 1619X01363
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Saw slipped and hit the concrete floor. The handle was shattered. Oops!
1. With a screwdriver, took apart the broken handle.
2. Disconnected the power cord leads.
3. Connected the new power cord.
4. Reassembled the new handle.
5. Pluged in the cord to the outlet and she works just fine. Thanks!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4.5
Average Rating (out of 5):
2 Reviews
Click to filter by ratings:
5 stars
1
4 stars
1
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Good quality, fits nice
    It’s not difficult to fray a saw cord, and when it’s frayed, you must replace it. Electrical tape is not the remedy. This replacement cord has heavy jacket as does many of the replacement cords you can buy. Service was great and I would buy here again.
    George - June 14, 2019 Verified Purchase
    5 minute job
    Arrived in a timely manner, perfect fit and good price.
    Guest - 26 days ago Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Skil, Bosch
    Product Number: 1619X08527
    Classification: Part
    Weight: 0.87 lbs.
    Also Known As: AC Cord, Power Supply Cord, Cord Set, Electric Cord
    Shipping: Ships Worldwide
    Repair Guides
    Articles:
    Replacing Bad, Cut, or Damaged Power Cords on Your Power Tools
    This article contains tips and basic steps for replacing power cords for most types of power tools, machines, and other ...
    September 18, 2009
    Related Products
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal