Easy
15-30 minutes
This item is a genuine Black and Decker replacement part. The plastic post is OEM sourced and intended to be used with sanders. This item attaches to the main housing and is used to mount the sander's base assembly. This item is sold as an individual replacement part.
Post,mounting 147431-01
OEM part for: DeWALT, Black and Decker
Part Number: 147431-01
$7.06
In Stock
Order within the next 12 hours and your part ships today! 
Jump To:
Compatibility
This Post,mounting will fit the following 24 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Black and Decker
Show More Compatible ModelsThis item works with the following types of products:
- Sander Parts
This part replaces obsolete part #: 147431-00
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
4
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Great parts
Website made it very easy to find the exact part i needed for the specific tool model I had. Saved me from having to replace the entire tool.
Guest -
May 17, 2021
Verified Purchase
Easy fix for a trusty tool
These are the legs that hold the sanding pad to the motor, and allow the vibrations to move the pad . 4 screws to take apart the sander, and 4 more to replace the mounting post. Fixing a trusty 25 year old tool or a few minutes time and $10 in parts is better then landfilling the old machine, and buying a piece of junk.
Blair -
May 11, 2021
Verified Purchase
New life for old unit
Salvaged old sander and needed this part to complete the repair. With a new pad, a useable sander at a fraction of the cost of a new one.
Guest -
October 27, 2020
Verified Purchase
Right part, right price, right away.
My BandD quick finish orbital/vibrator gets heavy use occasionally, which breaks the mounts. These are the drop in replacements. Takes longer to remove eight screws than replacing the mounts.
Guest -
October 8, 2019
Verified Purchase
Sander Post mounting
Thumbs up!
Guest -
June 24, 2022
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Post,mounting
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Mounting posts became worn enough to fall away, separating the pad from the motor.
Pete - August 30, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
1. Downloaded the parts list and exploded view of the sander from Black and Decker.
2. Separated the two halves of the upper assembly.
3. Removed the remaining mounting post and replaced both with new mounts.
4. Fastened both halves together, trapping the mounting posts.
5. Screwed the sanding pad to the mounting posts.
6. Plugged in the power cord to test the mounting.
7. New mounts were a perfect fit.
2. Separated the two halves of the upper assembly.
3. Removed the remaining mounting post and replaced both with new mounts.
4. Fastened both halves together, trapping the mounting posts.
5. Screwed the sanding pad to the mounting posts.
6. Plugged in the power cord to test the mounting.
7. New mounts were a perfect fit.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
A very bad vibration in my palm sander
Jim - April 21, 2023
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
I found that the mounting posts for the sandpaper plate were broken. Disassembly of the sander required removing 8 or 10 T27 screws and was fairly simple to do. I found to part I needed at Ereplacementparts and ordered it. Three days later I had my part, installed the new part in my sander and finished my project without the added cost of having to buy a new sander.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
the extensions
Chuck - September 9, 2022
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
remove the sanding plate, remove screws & split the case, remove the shaker plates. Replace the shaker plates & reassemble case. reattach sander pad bace.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sanding pad mounting post broke.
John - June 2, 2022
Tool Type
Sander
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver
Parts Used
1. Disassembled palm sander.
2. Replaced broken sanding pad mounting posts with new ones.
3. Reassembled palm sander.
2. Replaced broken sanding pad mounting posts with new ones.
3. Reassembled palm sander.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Mounting posts were broken
Robert - December 16, 2018
Tool Type
Sander
Difficulty
Easy
Time
1-2 hours
Tools Used
Screwdriver
Parts Used
Took out the broken posts and put in the new ones. Put the sander back together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
One of the two plastic mounting posts was worn out.
Gilbert - October 21, 2018
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Torx screwdriver
Parts Used
Removed the sanding pad by removing 4 torx head screws, then took the body apart by removing 4 more torx head screws. Replaced the bad plastic part, then assembled the sander. The plastic part was badly worn thin, but its mate wasn't worn, so I only replaced one of them.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sander post broke
Jeffrey - July 25, 2016
👍 0 of 1 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
It was easy once I found the two screws hidden under the model name plate.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The sander was falling apart.
Raymond - November 23, 2015
👍 0 of 1 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Remove sanding pad. Remove worn post mounting. Install new post mounting. Replace sanding pad. Replace sandpaper.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
