866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Power Tool Parts  Makita Parts  214251-1 Plane Bearing

Plane Bearing

Part Number: 214251-1
Makita
Availability: 25+ in stock
Price: $5.93
Quantity:
Ships within 1 business day
Description:
This is an Authentic OEM Approved replacement part designed for use with Makita Planers/Jointers. This part is made out of Metal and it is Sold Separately. This part helps to secure the Roller and allows it to spin smoothly.

To replace this part you would need Retaining Ring Pliers, Screwdriver and a Set of Wrenches.
Product Information
Manufacturer: Makita
Product Number: 214251-1
Classification: Part
Weight: 0.05 lbs.
Shipping: Ships Worldwide
Compatibility

This part is compatible with the following machines:


Products Compatibility

This item works with the following types of products:

  • • Jointer
  • • Planer
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
2 of 2 people found this instruction helpful
Tool Type:
Planer
Parts Used:
Plane Bearing - 214251-1
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Need split ring pliers
The bearing was wore through by the out feed roller shaft. Causing the stock to feed in a jerking motion as it went through the planer.
Remove the planer side panels
Remove the sprocket from the roller shaft
Remove the plane bearing retainer clips
Remove the roller and the plane bearing
Install new plane bearing on roller shaft
Re assemble
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Planer
Parts Used:
Plane Bearing - 214251-1
Repair Difficulty:
Medium
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, Adjustable Wrench
Replacing the roller bearings on a Makita 2040
The 2 screws that hold the bearing housing in are phillips heads. Discard those and replace with allen heads, works great! There are 4 roller adjustment pieces, a height adjustment and tension adjustment. Only one height adjustment goes all the way up and down per roller. So one has a some adjustment, and the other a lot. I assume it is a preventative measure by Makita to insure you CANT run the rollers to low. You are restricted by the travel of one side. No biggie, just spent 30 minutes trying to figure out why two of the adjustments had so little travel. I found a large old chisel, ground a bit, worked good for the adjustment.

Put the rollers up on blocks of wood and raise the bed till the bearings are in place, then have at the screws. Go slow, lube them good and don't cross thread them. Maybe have a small tap on hand.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Planer
Parts Used:
Plane Bearing - 214251-1
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Wrench Set
1 broken and 3 worn feed roller bearings
Removed the covers, roller chain, and old bearings. Replaced with new and replaced covers.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Planer
Parts Used:
Plane Bearing - 214251-1
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Snap ring pliers
Would start and stop due severely damaged bearing.
1. Remove cover over roller chain drive.
2. Using snap ring pliers, remove sprocket on roller that bearings are being changed.
3. Removed 4 screws that hold the clips retaining bearing and roller.
4. Replaced bearing.
5. Installed roller with clip and 4 screws. (Make sure springs are installed on top of bearing).
6. Install sprocket and chain.
7. Install chain drive cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Planer
Parts Used:
Plane Bearing - 214251-1
Tension Spring 9 - 231745-1
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Dial indicator and magnetic base
Broke bearing roller shaft wore away material resulting in loose roller and poor out feed performance.
Lower planer bed. Remove metal gearbox cover. Remove chain. Loosen roller spring tension screw. Remove retainer plate for bearing and spring housing.drop bearing and roller out of housing. Remove gear retaining clip and gear from roller shaft. Replace bearings, and put back together. Use dial indicator to verify head is level to table, pressure plates and chip breakers are correct drop from head, and rollers are correct drop for the stock you feed. Adjust spring tension and test.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Planer
Parts Used:
Plane Bearing - 214251-1
Roller 65-400 - 162094-4
Sprocket 15 - 221503-3
Metal Cover S - 342537-4
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Hammer, jack, file
Sprocket broke, shaft on main drive roller broke, plane bearing worn through, and metal cover S broke.
Removed old roller, bearing, sprocket, and metal cover, that holds the roller in place, and replaced them with new ones. I used a car jack to hold the roller in place while I put the springs, bearings and roller back in place. Then I replace the sprocket, oiled the chain and clean everything. It is working great. This is a Makita 15 inch model 2040 planer. The new sprocket was hard to get back on. I had to do some minor filing. Using the car jack and a piece of wood freed my hands to get the springs, bearings, and roller back in place. I have had this planer for about thirty years.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Planer
Parts Used:
Plane Bearing - 214251-1
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
The planer would pause intermittently while planing boards.
First, I removed both side guards of the planer. Then, you must unscrew the two screwS holding the plane bearings in place. Replace the bearings and put the sides back on. This needs to be done for all 4 bearings as it is best to have all of the bearings on the same life span.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Planer
Parts Used:
Roller 34-295 - 162186-9
Plane Bearing - 214251-1
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Socket set
Very poor feed rate.
Remove top tray to lock the blades in place so they won't cut you. Lay planer on its back for easy access to the 8 phillips screws. Remove the gear cover and remove the belt tension spring. Remove snap rings from each sprocket that drive the rollers. Pull of the sprockets and remove the keys. Note: the older models used half moon keys. The newer models use a square key. You may have to order new keys if you have the old style half moons. Remove 2 screws from each bearing clip. Remove the old rollers and make note of the heavy springs location. One bearing uses two springs. Reassemble in reverse order with the new bearings and rollers.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Plane Bearing - ( 214251-1 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy