This is an authentic manufacturer sourced replacement part that is specially designed for use with gas powered lawn and garden equipment. The purpose of this gasket is to provide an air-tight seal for the gearcase. Over time gaskets tend to get compressed and deteriorate eventually requiring replacement. Please note one durable composite material gasket is included per order.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Fit the tiller great!! Exact match as factory gasket.
Work great.
Denzil - October 1, 2019
Verified Purchase
★★★★★
★★★★★
Tiller Repair
After figuring out the problem with my tiller, EReplacement Parts was only site that had the parts ti repair my 34 year old tiller. Thanks alot
Guest - October 25, 2019
Verified Purchase
★★★★★
★★★★★
Tiller Gearcase Gasket
Gasket was in good condition, arrived in just a few days, and fit perfectly.
Guest - December 8, 2019
Verified Purchase
★★★★★
★★★★★
Great part!
MUCH better part then the factory part! Had to break open the transmission 3 times due to shifting problems and had NO problems with the gasket. Almost a perfect fit
Guest - July 5, 2019
Verified Purchase
★★★★★
★★★★★
Worked as designed no problem
Tiller repaired and working great, parts arrived several days before the estImated week Which allowed me back in garden . Happy gardener.
Guest - April 28, 2020
Verified Purchase
★★★★★
★★★★★
Perfect fit
Worked great
Daniel - April 30, 2020
Verified Purchase
★★★★★
★★★★★
Great fit! Gasket fit perfectly!
Part came quickly! Part was a gasket for my Craftsman Dual rotating tine tiller. This gasket is for between the two stamped transmission housing halves. Stilll need to go back together with it. Found out I need a new shaft as well. As the shaft has worn and lost its side to side tolerances. Will order shaft from eReplacments!!
Jonathan - August 8, 2020
Verified Purchase
★★★★★
★★★★★
exact fit thanks
aaa
Guest - February 10, 2021
Verified Purchase
★★★★★
★★★★★
Fit perfectly.
Arrived quickly and fit perfectly.
Guest - April 29, 2020
Verified Purchase
★★★★★
★★★★★
Worked very well
Would have given 5 stars had it arrived in a timely manner it took nearly a month to receive this part
Guest - August 2, 2019
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Replaced needle bearings, drive chain and the input shaft. it was pretty much a straight forward disassembly of the entire rototiller. With the exception of the removal of the left hand side tines and drive wheel. It required using the two arm puller for removal of these items. the only issue I had with reassembly was the rear tine axle
... Read moreseals. they had a pretty tight tolerance, and I had to heat them up to expand them to fit on the hubs. As far as special instructions, I would recommend not removing the three shaft nuts on the left hand side of the transmission during disassembly and splitting of the transmission body. It\'s not needed, and the re-tightening of these nuts can be a little tricky as far as over tightening them. You should turn the Tine axle during re-tightening to make sure all of the gear works is turning smoothly before you move to reassembly of the rest of the tiller. Nothing worse than taking it back apart to loosen something.
Read less
Did you find this story helpful?
Thank you for voting!
Tines would not engage
Larry from Licking, Missouri
2 of 3 peoplefound this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
1. Took entire tiller apart .
2. Removed motor.
3. Tore down transmission .
4. Checked condition of all parts .
5. Cleaned all good parts .
6. Ordered parts needed.
7. Received parts .
8. Put transmission back together .
9. Put tiller back together.
10. TAKE LOTS OF PICTURES AS YOU T
... Read moreAKE THE TILLER APART . THIS WILL BE VERY HELPFUL .
11. Used over a gallon of marine grease .
12 . Make sure the transmission moves in every gear before reassembling tiller .
13. Replace ALL bearings .
Read less
Did you find this story helpful?
Thank you for voting!
Broke Chan in gearbox
Daniel from Albany, Louisiana
1 personfound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
1 Took the tiller all apart
2. Split the gear box in half
3 . took out all the gears and sifter
cleaned out old grease .
4 replaced nidle bearings .
5 out new chain on .
6 replaced all the Grears for tines and wheels .
7 replace gasket .
8 bolted gearbox back to gether and put
... Read more fream back on gearbox .
9 Ran it and its all working . Tilles and wheels pull as it all should . On A Craftman REAR tine Tiller .
completely disassembled the tiller to remove all parts from the transmission and opened it. Replaced the stripped pinion gear and reassembled the transmission and tiller.
Did you find this story helpful?
Thank you for voting!
The tillers blades were not turning
david from bayside, New York
0 of 1 peoplefound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
had to remove every thing down to the frame then split the frame into two sections. repaired the chain and replaced the gasket and clean then replaced grease in case. then reassembled .
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9018035
Manufacturer Part Number: 532431022
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/lawn-and-garden/tiller/seals-and-gaskets/"},{"position":2,"name":"532431022","title":"532431022","url":""}]
_WW_7.gif "Part Location Diagram of 532431022 Husqvarna Gasket, Gearcase")
_WW_7.gif "Part Location Diagram of 532431022 Husqvarna Gasket, Gearcase")
