1. Took entire tiller apart .
2. Removed motor.
3. Tore down transmission .
4. Checked condition of all parts .
5. Cleaned all good parts .
6. Ordered parts needed.
7. Received parts .
8. Put transmission back together .
9. Put tiller back together.
10. TAKE LOTS OF PICTURES AS YOU T
... Read moreAKE THE TILLER APART . THIS WILL BE VERY HELPFUL .
11. Used over a gallon of marine grease .
12 . Make sure the transmission moves in every gear before reassembling tiller .
13. Replace ALL bearings .
Completely disassemble tiller main case
Remove all grease,if it is brown it had water in it.this case are a two piece shell type.
Replace the shiftier rod,spring bearing,water gets inside where the spring and ball are. Mine got water inside from using the pressure washer to clean.
Use 400 grit sandpaper to polish any rus
... Read morety shafts.
Re-lube chain and gears using good grease,Valvoline #2 red grease works good.
Make sure to work grease into the needle bearings real good ,as they don\'t get any grease otherwise it\'s the way they designed them.
Clean off the mating surface of the two halves with acetone or lacquer thinner.
Use a bead of automotive silicon seal without a gasket to seal.put a bead inline with the bolt holes and at the holes go all the way around the hole.
Carefully put the shell half back on taking care not to forget any parts ,tighten as needed .
Let sealer set up 24 hours before using.
Read less
Did you find this story helpful?
Thank you for voting!
Tiller LockeÆs in gear. Water in gear box rusted. Internet also found spring and ball that become stiff over time.
Removed all parts to get to gearbox, opened two halves cleaned out water and old grease. Replace shift shaft, spring and ball. New gasket. All works like new
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9012616
Manufacturer Part Number: 532154466
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Wheel or Roller","title":"Wheel or Roller","url":"/parts/lawn-and-garden/tiller/wheels-and-rollers/"},{"position":2,"name":"532154466","title":"532154466","url":""}]
_WW_7.gif "Part Location Diagram of 532154466 Husqvarna Shaft, Shifter, Tiller")
_WW_7.gif "Part Location Diagram of 532154466 Husqvarna Shaft, Shifter, Tiller")
