This genuine OEM replacement drive belt is designed for use with rotary lawn mowers and garden tillers, providing a reliable connection between the engine and the cutting or tilling mechanism. Made from high-quality, durable rubber, this belt is built to withstand regular outdoor use and is sold individually. Replacing the belt is a relatively simple task that requires only a screwdriver. To perform the repair, first disconnect the spark plug to ensure safety. Then, remove the belt cover to access the old belt. After removing the worn belt, install the new one in its place, secure the cover, and reconnect the spark plug. Always consult your equipment’s manual for model-specific guidance and safety precautions.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Great fit
Package arrived promptly. Removed old belt and replaced with new belt and my tiller is running better than before. Good selection of parts for the older equipment. This belt was the original part number and part for tiller. Not a universal one size fits all belt. I will shop with you again.
Guest - May 1, 2019
Verified Purchase
★★★★★
★★★★★
Been a customer several times.....
Parts were great,arrived quickly! Love the expanded views you provide!Will always check with you before I go anywhere else!
Guest - July 30, 2019
Verified Purchase
★★★★★
★★★★★
Excellent part, quick delivery. Thanks
Nice work
Guest - April 6, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair
Belt arrived as expected and was an easy fix.
Jerry - June 15, 2020
Verified Purchase
★★★★★
★★★★★
As advertised
Quick shipping, correct part
Guest - April 22, 2021
Verified Purchase
★★★★★
★★★★★
friendly and efficient service
not used yet
Guest - May 11, 2021
Verified Purchase
★★★★★
★★★★★
Great results
I finally got a belt installed on my tiller today. Works great. Now will have a GARDEN.
Guest - May 19, 2021
Verified Purchase
★★★★★
★★★★★
Worked as expected
Arrived quickly, Perfect Fit, My Tiller is digging again.
Chad D Bennett - June 21, 2023
Verified Purchase
★★★★★
★★★★★
Perfect fit for my tiller!
Arrived quickly and worked perfectly. Always pleased with the parts I buy from eReplacement Parts. Thanks!
Harold - April 6, 2024
Verified Purchase
★★★★★
★★★★★
Worked as expected
Possibly was slightly larger than the original, but worked.
Guest - April 29, 2020
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1 removed wheel
2 removed side cover
3 removed old belt
4 put new belt on
5 sprayed the screws to the cable
6 removed screws to cable
7 removed cable
8 put new cable on and tighten the screws be sure to adjust cable to your machines specs
Did you find this story helpful?
Thank you for voting!
the drive belt was worn out and had a bad spot init!
Took the shield off and then took the pressure off the drive wheel so I could remove the pin so I could slide the wheel out a little so I could get the belt on the pulley. Just about that simple! Then put everything back together again.
Did you find this story helpful?
Thank you for voting!
A Chain broke on the wheel drive in the gear box of a Charftman rear tine tiller .
1 Took the tiller all apart
2. Split the gear box in half
3 . took out all the gears and sifter
cleaned out old grease .
4 replaced nidle bearings .
5 out new chain on .
6 replaced all the Grears for tines and wheels .
7 replace gasket .
8 bolted gearbox back to gether and put
... Read more fream back on gearbox .
9 Ran it and its all working . Tilles and wheels pull as it all should . On A Craftman REAR tine Tiller .
Jacked up, pulled pin, removed wheel, 13mm removed nut from face cover, then pulled two screws and removed face cover. pulled the clip off the pulley, pulled the pulley out to replace new belt and put pulley back on. clip back into pulley and finish putting belt on other pulleys and replace cover. Replaced wheel and put carter key and p
... Read morein back on and returned to garden. I followed instructions in owners manual with pictures.
Remove left tire
Remove belt guard
Loosen nut on back side of bottom stud that holds guard on in order to move stud down for enough clearance between stud and driven sheave to remove old belt and put on new belt.
Put on new belt and reassembled components
Adjusted belt tension
Did you find this story helpful?
Thank you for voting!
Mower blades had to be re-placed traction drive belt was slipping worn out
Took the mower deck off the tractor cleaned deck from all grass installed new blades tipped tractor on its side removed old drive belt and installed new drive belt also changed spark plug air filter oil filter and oil greased the chassis that was it
I removed tire from axle and then removed v belt cover on tiller. I then took off old belt and put new belt on. I then put cover back on and replaced tire on axle. I then started tiller and went to garden and tested it. It worked fine and shifted in and out of the gears just fine.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP17016528
Manufacturer Part Number: 591372401
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_3.gif "Part Location Diagram of 591372401 Husqvarna Belt, V")
_WW_3.gif "Part Location Diagram of 591372401 Husqvarna Belt, V")
