This authentic component is an OEM part which is designed for use with Toro snowthrowers. It helps to secure a part on a shaft. This is an identical replacement for a damaged or a faulty hardware that was installed on a new unit. Keep in mind this high-quality ring-retaining is made of durable metal and is sold individually. Make sure to check the appropriate diagrams of your model for the exact location and the correct installation of this component. It is best to use snap-ring pliers to secure and remove it.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ereplacementparts.com is great!
Great experience finding this part on Ereplacamentparts.com was easy. Will be definitely use it again for other items.
The clip was the exact same as the original.
Joel - May 8, 2019
Verified Purchase
★★★★★
★★★★★
Mower parts, fast, easy, quick delivery
The parts were individually wrapped, easily identifiable. Online catalog had all the parts needed with diagram/schematics.
Guest - June 11, 2019
Verified Purchase
★★★★★
★★★★★
Retaining ring
Repair was simple and the part fit perfectly. Could get another 30 years out of my mower!
Guest - June 29, 2019
Verified Purchase
★★★★★
★★★★★
Toro replacement parts
I needed to get some replacement parts for my 22" toro mower but didn't know the names or part numbers. The rep took time to help and figure out the problem then sent the right parts. Yes, I'd use them again.
Guest - September 25, 2019
Verified Purchase
★★★★★
★★★★★
Perfect parts replacement. Expediant delivery. Thank you.
Perfect parts replacement. Expediant delivery. Thank you.
Alan - October 9, 2019
Verified Purchase
★★★★★
★★★★★
Just what I needed
My mower works like brand new!
Guest - November 18, 2019
Verified Purchase
★★★★★
★★★★★
Exact replacement.
They always make it easy to get the right parts I need for my repair. This worked great and we're back up and running.
Guest - November 22, 2019
Verified Purchase
★★★★★
★★★★★
Toro transmission gear retaining ring
New retaining ring was much easier to install than the old snap ring set up that originally came on the mower. Worked very well.
Erik - April 7, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair and a great upgrade.
The parts were delivered in good condition and on time. My lawnmower is working better than before.
Guest - May 11, 2020
Verified Purchase
★★★★★
★★★★★
Part was what I needed
The detailed part diagram on this site made it easy to identify the part that I needed. The part came quickly and the mower is up and running again.
Guest - June 26, 2020
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Disconnected spark plug. Removed grass bag. Raised mower up on wooden 2x4s to access back wheels (did not tilt mower).
2. Removed left wheel with a socket set.
3. Removed ring clip with screw driver and needle nose pliers.
4. Removed pinion gear and thrust washer while holding down key on shaft. Quickly examined condi
... Read moretion of key and didn\'t replace.
5. Replaced with new pinion gear, new thrust washer and new ring clip. Slid pinion gear on with L on outside (facing direction you would be standing to use mower), thrust washer and put on gloves to push ring clip onto shaft. The pinion gears have L and R engraved on them and are interchangeable.
6. Replaced old wheel with new wheel. Gears on old wheel were worn too. Used socket set to reinstall wheel.
7. Repeated for the right side.
8. Tested and self propelled worked. Although the left wheel would not move when I backed up. I had the tension too tight on the self propelled cable. Loosen nut near handle and eased back on the tension in the cable. Mower backs up and self propelled works like new. Mower is about 12-14 years old and is a Toro Personal Pace.
Read less
Did you find this story helpful?
Thank you for voting!
Drive gear components were missing/spring for key was broken
When we investigated the reason for the self-propel not working, we found numerous parts missing and the gear off the shaft. Replaced parts and reassembled and thankfully it is working like a charm. Just followed the parts diagram. And take your time.
First I removed the shoulder bolt with the impact wrench. Then removed the wheel. Removed the clip ring, then the thrust washer. I then removed the pinion gear just by pulling it off. Replace the old thrust washer, clip ring, and thrust washer. To assemble just reverse the order of the tear down.
Did you find this story helpful?
Thank you for voting!
Rear wheel drive pinion and gear on the wheel kept skipping.
Removed the wheel and the pinion and bearing housing. Pressed the new bearing into the new bearing housing and then then pressed in the fiber sleeve into the bearing housing. Install the new bearing housing into the wheel bracket. Installed the pinion spacer washer and then the pinon gear. and installed the snap ring retainer.
Insta
... Read morelled new wheel and axle bolt with the new spacer washer. Note: I had just installed a new pinion gear a few days before.
Works ok so far. No pinion gear jumping on the wheel gear. Suspect the bearing and the fiber sleeve for the drive shaft from the transmission was worn causing the skipping problem on my Toro personal pace mower.
Read less
Did you find this story helpful?
Thank you for voting!
Lawn mower left drive wheel was not driving properly.
1. Removed the rear wheel assemblies.
2. Removed the drive mechanism retaining c-clip on both rear wheels.
3. Removed the drive mechanisms.
4. Replaced the parts listed above and completed the repair on both rear wheels.
Note: Washer-Clutch and Ring-friction are the most common wear problems but, I replaced
... Read moremost everything since the mower was 7-yr old and still running very good.
I set the lawn mower up on blocks. Installed the spring, set the shafts key over the spring, slid the gear over top. Put the washer in place, used needle nose pliers to lock in the snap ring, put the tire on and used a 1/2\" socket to tighten up the tire. Very easy.
Did you find this story helpful?
Thank you for voting!
ball bearings worn out allowing axel to flop around and not engage drive wheel correctly.
I\'m still working on this repair. Replacing the ball bearing and bearing retainer was simple. The biggest problem is removing the retaining ring clip to access bearing retainer. I bought a special tool to expand it. But it doesn\'t expand it wide enough and I really had to wrestle with it. Once I got it off, the bigger challenge was putt
... Read moreing the new one back on after replacing the ball bearing and bearing retainer. The pliers don\'t expand it enough to get it back on. I\'m going to Northern tool to look for a better tool. The one I bought at an auto parts store simply doesn\'t open wide enough.
Read less
Did you find this story helpful?
Thank you for voting!
Wheel Cover Asm broke allowing foreign material into wheel drive gear causing displacement of gear and retaining parts.
LawnBoy lawnmower with rear drive wheels:
Disassembled the other drive wheel (one bolt) to determing which parts were missing from the other broken side and how it should be re-assembled. Once again have two rear drive wheels! Easy fix. Thank you eReplacementParts for providing PayPal payment option and quick delivery.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9052921
Manufacturer Part Number: 65-2720
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(1994)_WW_7.gif "Part Location Diagram of 65-2720 Toro Retaining Ring")
(1994)_WW_7.gif "Part Location Diagram of 65-2720 Toro Retaining Ring")
