This authentic item is supplied directly from the original equipment manufacturer for use with Toro and Lawn Boy lawn and garden equipment. It is an identical replacement for a missing or a faulty bushing-sleeve that was installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality component is made of durable metal and is sold individually.
Removed the wheel and the pinion and bearing housing. Pressed the new bearing into the new bearing housing and then then pressed in the fiber sleeve into the bearing housing. Install the new bearing housing into the wheel bracket. Installed the pinion spacer washer and then the pinon gear. and installed the snap ring retainer.
Insta
... Read morelled new wheel and axle bolt with the new spacer washer. Note: I had just installed a new pinion gear a few days before.
Works ok so far. No pinion gear jumping on the wheel gear. Suspect the bearing and the fiber sleeve for the drive shaft from the transmission was worn causing the skipping problem on my Toro personal pace mower.
Read less
Did you find this story helpful?
Thank you for voting!
Drive gear sheared and retainer bushing damaged when replacing.
Ron from Kurtistown, Hawaii
3 of 3 peoplefound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable), Wrench set
You have to remove the drive gear and adjustment plate to get to the retainer bushing. Because it is probably rusted on, you will need to use a very large wrench or a vise and hammer if you do not have the right size wrench. After you get it part reassembly is very easy.
Watched Youtube video and followed his instructions, they were mostly correct, my challenges were because of rust and corrosion that wouldn\'t allow easy disassembly. Process too long to type, watch the video.
Did you find this story helpful?
Thank you for voting!
Axel bushings were worn, and lever on self propel cable broke
The bushings were easy, remove snap ring and spur gear. Replace bushings. The self propel handle was difficult. Needed at least one more person, and had to flex (bend) the handle to get it back into the mower handle.
I pulled the rear wheels of and the handle mount to expose the bearings and sleeves.
I unscrewed the old retainer bushings.
I pressed the bearing and bush sleeve into the retainer bushing using the bench vise. this made it very easy.
I put the retainer bushings back in place and put it back together.
The mowers sel
... Read moref-propels quietly and quickly.
Read less
Did you find this story helpful?
Thank you for voting!
Popping in transmission
Roger from Alpharetta, Georgia
1 personfound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
The original bearings were totally worn out, the plastic sleeves were gone completely, the rear wheels were moving around and causing the gears inside the wheel to misalign and grind and wear out quick. I replaced the bearings and bushings to get rid of the slop, the bearing retainer just made the job easier so I could replace the assembl
... Read morey and did not have to remove the old bearing. It goes together just like the parts drawings on the website. I had already replaced the wheels/drive gears and pinion gears prior and that did not solve my problem. Mower is 9 years old and now nice and smooth just like new for around $45 (I have to give youtube a little credit)
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP8833696
Manufacturer Part Number: 108-9782
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(2012)_WW_6.gif "Part Location Diagram of 108-9782 Toro Bushing-sleeve")
(2012)_WW_6.gif "Part Location Diagram of 108-9782 Toro Bushing-sleeve")
