Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
9016399-1-M-Husqvarna-532194327-Flat Idler Pulley
Part Location Diagram of 532194327 Husqvarna Flat Idler Pulley
See part C-50 in the diagram
9016399-1-S-Husqvarna-532194327-Flat Idler Pulley 360 view
( Grid squares measure 1x1 inch )
9016399-1-S-Husqvarna-532194327-Flat Idler Pulley 9016399-2-S-Husqvarna-532194327-Flat Idler Pulley 9016399-3-S-Husqvarna-532194327-Flat Idler Pulley 9016399-1-S-Husqvarna-532194327-Flat Idler Pulley 360 view
Part Location Diagram of 532194327 Husqvarna Flat Idler Pulley

Flat Idler Pulley 532194327

Manufactured by:
Husqvarna
ERP Number:
ERP9016399
Part Number:
532194327
Original Equipment Manufacturer ?
$14.16
★★★★★
★★★★★
23 Reviews
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

1- 2 hours 

(32 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Jump to:

Description Frequently Purchased Together Troubleshooting Reviews Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

This is an Original Manufacturer Approved replacement ground drive idler pulley designed for lawn tractors. The purpose of this pulley is to apply tension to the belt. It is made out of Plastic with Metal and it is Sold Individually. To complete this repair you would need a Wrench and Pliers. • Remove mower deck • Loosen bolt that secures the pulley and remove Drive belt • Remove bolts and washers from Pulley • Replace the old Pulley with a new one • Secure the pulley and install the belt • Reassemble mower deck

Frequently Purchased Together

?
Shoulder Bolt
★★★★★
★★★★★
(27)
$4.13
In Stock
Minimum Quantity of 2 required
Lawn Mower Cotter Pin
★★★★★
★★★★★
(9)
$4.13
In Stock
Minimum Quantity of 2 required
Bowtie Cotter Pin
★★★★★
★★★★★
(6)
$6.15
In Stock
Minimum Quantity of 2 required
Bolt Fin Hex 3/8-16 Unc X 2-3/
$4.23
In Stock
Minimum Quantity of 2 required
Bellcrank Ground Drive
$8.33
In Stock
Link Clutch Ground Drive
★★★★★
★★★★★
(1)
$5.29
In Stock
Minimum Quantity of 2 required
Idler
$39.44
In Stock

Troubleshooting

This part fixes the following symptoms:
  • Drive system does not work
This part works with the following brands:
  • Husqvarna
  • Jonsered
  • Poulan
  • Craftsman
  • Ariens
  • RedMax
  • Weed Eater
This part works with the following products:
  • Lawn Mower
  • Lawn Tractor
Part# 532194327 replaces these:
  • 532194327
★

Customer Part Reviews

?
4.8
Average Rating (out of 5):
★★★★★
★★★★★
(23 Reviews)
Click to filter by ratings:
  • 5 stars
    21
  • 4 stars
    1
  • 3 stars
    0
  • 2 stars
    1
  • 1 star
    0
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy to order
Part was A OK
Eugene - April 24, 2019
Verified Purchase
★★★★★
★★★★★
The right part
It was the right part shipped on time and good quality
Guest - May 11, 2019
Verified Purchase
★★★★★
★★★★★
Fast shipping perfect part
Part came quickly just as promised and part works great
Guest - May 27, 2019
Verified Purchase
★★★★★
★★★★★
Craftsman pulley
Part was easily located and works perfect.
Guest - May 28, 2019
Verified Purchase
★★★★★
★★★★★
Exact part
New
Guest - June 3, 2019
Verified Purchase
★★★★★
★★★★★
Fast service and correct parts
Just received my two pulleys OEM quality and fast service as always. Thanks.
Richard - August 5, 2019
Verified Purchase
★★★★★
★★★★★
P u ll
Fit
Guest - August 6, 2019
Verified Purchase
★★★★★
★★★★★
Lawnmower pulley
Right part. Works well. Thank you!
Guest - August 14, 2019
Verified Purchase
★★★★★
★★★★★
Exactly like the original.
Part fit perfectly, and worked as expected.
Guest - September 16, 2019
Verified Purchase
★★★★★
★★★★★
Worked as expected
The parts were just what I ordered. Shipping was prompt. I will use them again for my tractor parts.
Guest - July 2, 2020
Verified Purchase
  • 1
  • 2
  • 3

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(32 rated repairs) ?
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Pulley material worn and destroying belt. Bearings worn in pulley creating a loud grinding noise

David from Pinehurst, Texas

17 of 17 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Parts Used:
532407287, 532194327, 532194326
1. Remove mower deck (can be done with deck attached but limited room to work)

2. Remove drive belt

3. Remove bolts and washers from each pulley using appropriately sized socket and/or wrench
(Bolts were ceased due to being in place for 6 years. Required WD-40 and ratchet with extended handle for mor e leverage)

4. Reverse process to install new pulleys, drive belt and mower deck
Read less
Did you find this story helpful?
Thank you for voting!

Drive belt slipping off pulley.

Chuck from Statesville, North Carolina

12 of 12 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Socket set
Parts Used:
592855201, 532407287, 532194327, 532194326
1) Remove deck.
2) Remove old pulleys, tag and identify for correct placement of new pulleys.
3) Remove drive belt, unplug connector, and bracket for PTO.
4) Install 3 new pulleys.
5) Install drive belt start at motor and work your way back to rear, drive belt goes to the left of the steering shaft.
6) Instal l deck.
Read less
Did you find this story helpful?
Thank you for voting!

My idler pullies were worn out and squealing,and causing my tractor drive belt to slip

Randy from Prattsville, Arkansas

11 of 11 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
532194327, 532194326
I dropped the deck off my Husqvarna 2654, slid it away and had open access to all three pulls I used my Ryobi impact with a socket and remove all three in a flash.Put on the new pulleys and reassembled unit.working great!
Did you find this story helpful?
Thank you for voting!

Noise under mower when clutch engaged

michael from cedar creek, Texas

9 of 9 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
532194327, 532194326
Removed mower deck. replaced the 3 drive belt pulleys from the engine to the transaxle. replaced mower deck. No more noise
Did you find this story helpful?
Thank you for voting!

Bearings were bad in pulleys

Randy from Marcy, New York

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
532194327, 532194326, 532140218
Removed mower deck and bad pulleys. Had to remove electric clutch for mower drive to replace belt. Reassembled in reverse order. Pretty straight forward.
Did you find this story helpful?
Thank you for voting!

Idler puller & belt were worn out plus made an oil change.

Michael from Smithfield, Virginia

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
592855201, 696854, 532194327
Removed the mower deck. Tilted mower on it\'s side. Unbolted metal deck from frame to gain access to idler pulls bolt. Put needle nose vise grip on head of mushroom head of bolt to hold still while removing pulley nut. Put on new pulley, tightened nut. Put on new belt. Re-bolted deck back to frame. Changed oil & filter. Done.
Did you find this story helpful?
Thank you for voting!

Lawn mower jerked and would stop moving

Robert from Rochester, Massachusetts

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Socket set, Wrench (Adjustable)
Parts Used:
592855201, 532194327, 532194318, 532194326
1. Removed cutting deck & belt
2. Removed drive belt
3. Remove 2 old pulleys (one was completely ruined, Bell crank keeper was broken)
4. Replaced pulleys & keeper bell crank ground drive
5. Replaced drive belt
6. Replaced cutting deck & belt
Did you find this story helpful?
Thank you for voting!

Drive belt and pulleys

Joseph from MINERSVILLE, Pennsylvania

2 of 2 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Socket set
Parts Used:
592855201, 532194327, 532194326
Place tractor on it\'s side. remove drive belt, and remove pulleys and place new pulleys, drive belt
Did you find this story helpful?
Thank you for voting!

Mower developed vibration when moving forward or backward. Flat idler pulley was broken

Tilden from Clarksville, Tennessee

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
Parts Used:
532194327
First, look up the youtube video for changing a Craftsman mower Drive Idler Pulley. The Craftsman mower is the same as my Husqvarna. Then pull the pins the hold the mower deck on and pull it to the right side of the mower.

The key is the idler pulley is held on by a carriage bolt that you can\'t see. If you begin loosening the nut on the idler pulley, it will loosen until the square on the carriage bolt head raises up out of the square hole in the frame. After that it just turns along with the nut. The fix is to jam a screwdriver over the head of the carriage bolt to hold it down.

When you get the old idler off, the bracket that holds another idler will drop down as well. Per the video, you have to release the clutch lever, re-position the bracket on the special washer, and then install the new idler pulley.

Once the idler pulley nut is tight,engage the clutch and put the belt where it should be and you\'re done. Mine worked perfectly.
Read less
Did you find this story helpful?
Thank you for voting!

Stationary idler pulley bearing failed (melted) and mower deck drive belt came off.

Ralph from Lake Stevens, Washington

2 of 2 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Parts Used:
593773401, 596435101, 596136301, 596136101, 596135501, 532196106, 532194321, 532178515, 532177968, 532409149, 532196104, 532194327, 532194326
1. Separated mower deck from lawn tractor and cleaned both units thoroughly.
2. Removed and replaced tractor mounted idler pulleys, since bearings were noisy.
3. Disassembled mower deck - opted to overhaul blade tower supports (3) to clean and renew lubrication. RECOMMEND REPLACING THESE PARTS AS A UNIT, instead of overhaul.
4. Bearing failure had caused hole in deck-mounted pivot support bracket for belt tensioner to become elongated - opted to do nothing at this time.
5. Replacement pulley on pivot support was not sized to accept 7/16\" dia bolt!!! Hardened spacer washer hole was too small as well. Re purposed another bolt from the ordered parts, and added washers as necessary to allow pulley to track properly without binding against the tensioner arm.
6. Removed and replaced other pulleys and hardware (these replacement parts were identical to the removed ones).
7. Installed new belt as per diagram on belt slip cover.
8. Reinstalled mower deck underneath the lawn tractor.

Works great!
Read less
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Model Cross Reference

This part works with the following models:
ERP Number: ERP9016399
Manufacturer Part Number: 532194327
Brand Model Number Description
Husqvarna 12530 Lawn Tractor - Pxt Tractor
Husqvarna 142R Brush Cutter - 142 R (20001900001-Current)
Husqvarna 143RII Brush Cutter - 143 Rii (20150400001-20180500000)
Husqvarna 1538 Lawn Tractor - Ride Mower
Husqvarna 1542XP Lawn Tractor - (T) (96043000602) (2006-10) Ride Mower
Husqvarna 1542XPT Lawn Tractor - Ride Mower
Husqvarna 155BT Leaf Blower / Vacuum - 155 Bt - 20053300001-Current (Us)
Husqvarna 164T Lawn Tractor - Cth Tractor
Husqvarna 1848XPT Lawn Tractor - Ride Mower
Husqvarna 184T Lawn Tractor - Cth Tractor
Husqvarna 2042 Lawn Tractor - Ride Mower
Husqvarna 2042LS Lawn Tractor - Ride Mower
Husqvarna 20B42T Lawn Tractor - Ride Mower
Husqvarna 20F42T Lawn Tractor - Ride Mower
Husqvarna 20K46 Lawn Tractor - Ride Mower
Husqvarna 2146XLS Lawn Mower - Husqvarna Lawn Mower Model 2146XLS Parts
Husqvarna 2146XP Lawn Tractor - Ride Mower
Husqvarna 2242T Lawn Tractor - Ride Mower
Husqvarna 2246 Lawn Tractor - Ride Mower
Husqvarna 2246LS Lawn Tractor - Ride Mower
Husqvarna 224T Lawn Tractor - Yth Tractor
Husqvarna 224TFI Lawn Tractor - Yth Tractor
Husqvarna 2346XLS Lawn Tractor - Ride Mower
Husqvarna 2348 Lawn Tractor - Ride Mower
Husqvarna 2348LS Lawn Tractor - Ride Mower
Husqvarna 2354GXLS Lawn Mower - Husqvarna Lawn Mower Model 2354GXLS Parts
Husqvarna 236R Brush Cutter - 236 R (20200400001-Current)
Husqvarna 240442 Lawn Mower - Husqvarna Lawn Mower Model 240442 Parts
Husqvarna 240443 Lawn Mower - Husqvarna Lawn Mower Model 240443 Parts
Husqvarna 240460 Lawn Mower - Husqvarna Lawn Mower Model 240460 Parts
Flat Idler Pulley
$ 14.16
In Stock
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖