This is an authentic OEM sourced part that is intended to be used with lawn tractors from Husqvarna, Poulan, and Jonsered. The pulley attaches to the mower's chassis and is used to guide the direction that the traction drive belt travels. This item is available as an individual replacement part.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Worked out well.
Impressive parts inventory. Expedient delivery service. High quality product.
Guest - July 22, 2019
Verified Purchase
★★★★★
★★★★★
Fit as advertised
I’ve only had the parts installed for a short time so not sure how long they will last. However, they went in without any issues and appear to be working fine at the moment.
Guest - August 19, 2019
Verified Purchase
★★★★★
★★★★★
Pulley teplacement
The items sent fit as expected, the experience is the same quality provided the last time. Spot on!
Guest - August 29, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair worked great.
Original part very good quality. I was well pleased.
Guest - June 21, 2021
Verified Purchase
★★★★★
★★★★★
Part was as advertised.
Part worked as suspected. Arrived quickly. Easy process!
Guest - June 25, 2022
Verified Purchase
★★★★★
★★★★★
easy repair (given you have to remove the mower deck)
exactly as ordered and perfect fit.
Guest - September 19, 2022
Verified Purchase
★★★★★
★★★★★
Great company
The part was exactly what I had ordered and fit perfectly. Ereplacement always has the parts I'm looking for and they ship faster than Amazon
Guest - May 13, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Remove mower deck (can be done with deck attached but limited room to work)
2. Remove drive belt
3. Remove bolts and washers from each pulley using appropriately sized socket and/or wrench
(Bolts were ceased due to being in place for 6 years. Required WD-40 and ratchet with extended handle for mor
... Read moree leverage)
4. Reverse process to install new pulleys, drive belt and mower deck
1) Remove deck.
2) Remove old pulleys, tag and identify for correct placement of new pulleys.
3) Remove drive belt, unplug connector, and bracket for PTO.
4) Install 3 new pulleys.
5) Install drive belt start at motor and work your way back to rear, drive belt goes to the left of the steering shaft.
6) Instal
... Read morel deck.
Read less
Did you find this story helpful?
Thank you for voting!
The pulleys had flat spots in them and the drive belt was kind of shredded
Pressure washed undercarriage and removed 3 pulley\'s and Bell-crank. Pulleys were held with carriage bolts. Removed main drive pulley with steering wheel puller so that old and new belt could be replaced. Removed battery and battery box to remove and replace drive belt on trans-axle. Wire brushed and repainted belt keepers. Lubricated a
... Read morend installed Bell-crank, connected foot brake and installed three pulleys. Using a round 10 inch #3 Phillips I was able to leverage the brake spring into place between the Bell-crank and the rear pulley bracket.
Read less
Did you find this story helpful?
Thank you for voting!
Pullys belt wore out Removed deck .used jack replaced parts
Replaced both pulleys, the idler and the idler flat. It was a bit confusing at first because the one pulley did not look like the one I took out. Turns out you need to drive the bolt out of the pulley and bearing. Then insert it into the new pulley.
Did you find this story helpful?
Thank you for voting!
Bearings went out on the pullies.
Modesto from LYFORD, Texas
0 of 1 peoplefound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Lawn Mower
- Husqvarna Lawn Mower Model 96041003007 Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_(2008-01)_WW_3.gif "Part Location Diagram of 532407287 Husqvarna Idler V-groove Pulley")
_(2008-01)_WW_3.gif "Part Location Diagram of 532407287 Husqvarna Idler V-groove Pulley")
