This replacement shear bolt is supplied directly from the original equipment manufacturer for use with Craftsman snowblowers. The purpose of this hardware is to protect your snowblower. If the auger gets jammed or clogged, the shear bolt is designed to snap at a certain point of pressure, that way it will not damage any other part of the unit. Please note this high-quality component is made of durable metal and is sold individually.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Product Availabillity
Ordered several parts for snowblower - was able to find them here. Order delivered very quickly.
Iglobal - December 4, 2020
Verified Purchase
★★★★★
★★★★★
That's It!
You can go to several hardware stores or in my case the hardware stores are 80 mi away. It was nice to find the exact part and have it mailed to my address.
Thanks.
Guest - November 11, 2021
Verified Purchase
★★★★★
★★★★★
Perfect fit, thank you.
Part came fast and got the old snowblower in shape gain.
Guest - February 10, 2023
Verified Purchase
★★★★★
★★★★★
Ancient Yard Man snowblower surgery.
My 2 yr old Poulan snowblower
drive assy locked up.
Another storm was imminent.
I bought a VERY used Yard Man
snowblower to finish the winter.
It needed a few parts to bring it
into the 21st century.
Your OUTSTANDING company had
all the necessary parts in stock.
The price was good & the delivery
was timely.
NEXT....
Parts to repair the Poulan drive will need to be ordered.
Thanks,
Burt Maltby, MSgt, USAF, Ret=ƒç¦=ƒç¦
Guest - April 5, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I removed the remaining pieces of the bolts by tapping them out with a screwdriver and hammer, lubricated the shaft, straightened out one of the augers that had a slight bend in it and proceeded to install the new shear bolts and then started the blower to make sure all was working properly, a job well done in a short period of time.
PUNCHED OUT REMAINING BOLT-
INSTALL NEW BOLT--
INSTALL LOCK NUT-
TIGHTEN WITH BOX-OPEN END WRENCH==
LESS THAN 15 MINUTES--
====OPEN BEER !!!!!=
ADMIRE WORK !!!
Did you find this story helpful?
Thank you for voting!
The reprair sleeves needed to be adjusted to fit my model
I used a hacksaw to make a cut a horizontal line to split the sleeve about 035 in width. The sleeves fit perfectly after and were ready for installation. We are good to go now.
Remove belt cover
Separate auger housing from main body
Remove belt discs from back of auger
Remove auger left and right bushings
Pull complete auger assembly out through the front of the housing
Remove augers
Remove auger worm gear housing
Slide worm gear off shaft be careful or to loose worm
... Read more gear key
Scrape and clean all old gasket from auger worm gear housing
Fill either side of housing with 00 grease
Reverse steps
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9100904
Manufacturer Part Number: 710-0890A
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_3.gif "Part Location Diagram of 710-0890A MTD Shear Bolt (5/16-18 X 1.5'' Lg.)")
_WW_3.gif "Part Location Diagram of 710-0890A MTD Shear Bolt (5/16-18 X 1.5'' Lg.)")
