I removed the three self-taping screws from the flange, removed the flange and old bearing and replaced with new part and reinstalled the parts using the three original self-taping screws. I did apply grease to the bearing prior to installation.
Did you find this story helpful?
Thank you for voting!
The reprair sleeves needed to be adjusted to fit my model
I used a hacksaw to make a cut a horizontal line to split the sleeve about 035 in width. The sleeves fit perfectly after and were ready for installation. We are good to go now.
Did you find this story helpful?
Thank you for voting!
worm gear key in the auger sheared, and flange bushing busted.
John from MIDVALE, Idaho
0 of 1 peoplefound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Socket set, Wrench (Adjustable), Wrench set
Removed the snow blower assy. from the mainframe, disassembled it, removed drive assembly from the blower and installed a new worm gear, reassembled that, reinstalled the augers on the shaft installed the new parts in the end supports, and completed reinstalling the auger assembly on the drive system. I followed the instructions that are
... Read more in the owners manual for disassembly and repair. Also their is a video guide on You Tube that is helpful to watch.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9178252
Manufacturer Part Number: 941-0300
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Bracket or Flange","title":"Bracket or Flange","url":"/parts/lawn-and-garden/snow-blower/brackets-and-flanges/"},{"position":2,"name":"941-0300","title":"941-0300","url":""}]
_WW_4.gif "Part Location Diagram of 941-0300 MTD Bearing-flange")
_WW_4.gif "Part Location Diagram of 941-0300 MTD Bearing-flange")
