Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
tiller parts
was very pleased with the quick response & got them quick . THANK YOU BOB
Guest - April 25, 2019
Verified Purchase
★★★★★
★★★★★
Expectation fulfilled.
A quick & effective answer to what’s needed.
Guest - May 10, 2019
Verified Purchase
★★★★★
★★★★★
Good as New
4 screws and my Honda weed trimmer is as good as new!
Guest - May 11, 2019
Verified Purchase
★★★★★
★★★★★
Total Satisfaction
Parts received was exactly what I expected, parts were easy to find on RP's web site, great price and received quickly. I expect to be doing business with them again when needed and I highly recommend RP.
Guest - May 27, 2019
Verified Purchase
★★★★★
★★★★★
good
good replacement
Guest - May 27, 2019
Verified Purchase
★★★★★
★★★★★
Great oem part, worked great
Fit perfectly, my weed eater is running great
Greg - July 30, 2019
Verified Purchase
★★★★★
★★★★★
very pleased.fast service.
I live 5 miles from honda plant in nc.couldnt find parts anywhere.you had them.thanks.
Guest - April 21, 2020
Verified Purchase
★★★★★
★★★★★
Worked as expected
Great condition tool works much better thank you
Guest - May 4, 2020
Verified Purchase
★★★★★
★★★★★
perfect as expected
Received the primer bulb very timely. Tiller works like new.
Guest - June 12, 2020
Verified Purchase
★★★★★
★★★★★
Thank you for keeping me in business.
You made repair easy, quick and uncomplicated.
Guest - July 21, 2020
Verified Purchase
< Prev
1
2
3
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Removed the fuel tank.
2. Removed and cleaned the carburetor.
3. Drained the oil.
4. Installed 2 fittings in the grommet.
5. Hook up fuel line with the fuel filter.
6. Attached the grommet with fittings into the fuel tank.
7. Attached the fuel tank into the body.
8. Attached the fuel lines from
... Read more the carburetor into the fuel tank.
9. Secure the carburetor into place with bolts.
10. Attached clutch line into the carburetor.
11. Fill the oil tank with oil.
12. Remove the tines to pump grease into transmission body.
13. Reinsert the tines.
14. Check and clean the spark plug.
15. Fill the tank with gas.
Choke the engine... start the engine....Broooom!!!! 1 Pull and it started immediately.....after warming up the engine, my old Honda FG1001A sounded like a brand new machine with power when revved up.
Read less
Did you find this story helpful?
Thank you for voting!
Engine servicing, tune-up, repairs to fuel primer bulb and fuel lines
Basically, all of the servicing and repairs were done with the help of You Tubers. I was able to follow the videos and able to to the work on my Honda Gas Trimmer with also help of eReplacement videos posted. All the parts purchased from eReplacement were correct and very easy to install.
PRIMER BULB REPLACEMENT- 4 CYCLE HONDA ENGINE ON MANTIS TILLER
1. Removed the pull rope to get to the gas tank holding bracket of the gas tank.
2. Removed the gas tank.
3. Unbolted the carburator to access the bulb and pump - removed 2 nuts
4. Removed 4 screws holding the bulb and pump plate in place. Note the orie
... Read morentation of the pump plate.
5. Remove the old bulb from its plate and gently press on the new bulb.
6 Reassembled the removed parts.
7. Tested the installed bulb- the engine started just fine.
Loosen carb to get at mounting screws and then replaced primer bulb. While I was at it I cleaned out the tank with some compressed air to remove water that was in there.
Did you find this story helpful?
Thank you for voting!
Carb on small tiller was clogged and had been setting up for three years
Pretty much an easy repair parts that came in were a perfect fit and worked great. The delivery was about 2 weeks though but nevertheless worth the wait. E replacement parts always ship in good packaging and the website with diagrams is great to find all your parts on line .
Relatively simple repair process, if you don\'t
... Read morehave specific directions or a step by step manual then take lots of pictures so you know where each piece fits and how it functions.
Remove top plastic cover (one Allen head bolt). Remove air cleaner cover and element. Remove carburetor (two nuts). Remove primer bulb housing (four Philips head machine screws). Remove primer bulb. Install new primer bulb. Install primer bulb and housing. Install Carburetor. Install air cleaner element and cover. Install top plastic cove
... Read morer. This would have been even easier had I known what I was doing, but when taking off the carburetor a very small spring flew out as the two pieces of the carburetor came apart, and I had no idea what part of the carburetor it came from and could not find a diagram online for it. After two times of trial and error (putting everything back together and trying to start it, I got lucky and found the right place for the spring. Trimmer runs perfectly again.
1. Removed starter rope housing and air filter/choke bracket.
2.swing fuel tank out to clear 4 screws on bulb bracket.
3. Remove bulb bracket screws
and remove bulb/install new bulb in bracket.
4. Screw bulb bracket back on to carberater.
5. Reinstall item 2 and 1
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(VIN_FZCV-6000001_to_FZCV-9999999)_WW_3.gif "Part Location Diagram of 16032-ZM3-014 Honda PUMP, PRIMER")
(VIN_FZCV-6000001_to_FZCV-9999999)_WW_3.gif "Part Location Diagram of 16032-ZM3-014 Honda PUMP, PRIMER")
