Product Information
Description:
This is a genuine Senco replacement part, it is sold individually. The No-Mar Pad is attached to end of the safety to prevent the material that it is being used on from getting marred or dented by the safety arm. It is a advisable to have one or two extra pads on hand as they do have a tendency to crack and deteriorate over time. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
the 9 compatible machines
Products Compatibility
This item works with the following types of products:
- • Nailer
Questions & Answers for Non-marking Pad
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Nailer
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
The cushion tip on my Senco finish nailer and Porter Cable brad nailer had deteriorated and broke off.
Slipped the replacement cushion tips on both nailers in less than 5 minutes. The replacement parts fit perfectly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
The old one deteriorated
Just press it on the lower safety.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
missing parts
pushed on new parts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, None needed
The non marking pad on my Senco was old and brittle and broken
Removed the old plastic bits and slipped the new pad on.
Searching your site I found the part I needed but it said “obsolete and no longer available”.
This replacement part was not linked to that old number and yet it’s a perfect fit. Since it is so inexpensive I just took the chance that it would work.
Searching your site I found the part I needed but it said “obsolete and no longer available”.
This replacement part was not linked to that old number and yet it’s a perfect fit. Since it is so inexpensive I just took the chance that it would work.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Fingers!
Pin lost retainer washer and came out and was lost
1. Replaced pin and retainer.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, None required
Non-mar rubber pad/foot (i.e., "Safety Cushion") on my Senco SFN1 finish nailer had dried out, cracked, and fallen apart.
The original rubber cushion pad part for the SFN1 (Senco #HF0002) is no longer available anywhere that I could find.
I have an original rubber cushion part that cannot be used because although it is intact, it has hardened and become brittle. I considered using the old part for molding and recasting new silicone rubber parts, but decided to try this part first.
This part, Senco #HF0079, looks much different from the original in overall shape and color, but it fits the SFN1 securely and perfectly. The web site does not tell you this, and if you search for part #HF0002, you will be told the part is no longer available (and no substitutions are suggested). But this is a good substitution, and requires no compromises or modifications.
I have an original rubber cushion part that cannot be used because although it is intact, it has hardened and become brittle. I considered using the old part for molding and recasting new silicone rubber parts, but decided to try this part first.
This part, Senco #HF0079, looks much different from the original in overall shape and color, but it fits the SFN1 securely and perfectly. The web site does not tell you this, and if you search for part #HF0002, you will be told the part is no longer available (and no substitutions are suggested). But this is a good substitution, and requires no compromises or modifications.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Fingers
Originbal pads were degraded, hardened in the atmosphere, fell apart and off the nailer.
Just slipped on the new pad, and saved the spare inside a bag to avoid exposure to the air.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Hand
Bumper worn out
Removed worn one and replaced with new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Factory No Mar tip lost.
Ereplacement part perfect fit.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, None
Non-marking pad dry rotted
1. Remove old pad (broken pieces)
2. Align and fit replacement pad
3. Done
2. Align and fit replacement pad
3. Done
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
13 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
12
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
- 2
Easy fix
The association’s knowledge was perfect and very professional as well
Guest -
May 26, 2023
Verified Purchase
Great service!
Needed to replace the soft pad covering the tip of my Senco finish nailer. The part was very reasonably priced and shipped quickly.
Thanks!
Guest -
January 29, 2023
Verified Purchase
It fit perfectly
It fit perfectly
Guest -
March 16, 2022
Verified Purchase
They always have the paret
I have a lot of old tools. Things break and I am always able to find the part at ereplacement and if that isn't good enough the delivery is very quick.
Guest -
February 15, 2022
Verified Purchase
Old Senco nailer pad
I ordered the non-marking pad for my 30 year old finish nail gun of which no part was listed available. I figured that this new part might fit and it did. With the low cost of the part and a higher cost of freight, I ordered three pads and they fit perfectly. Am I satisfied, hell yes I am.
Guest -
November 30, 2021
Verified Purchase
Nail gun repair
After many years the nose piece bumper finally dried out. These replacements were perfect. Back to shooting nails without marring wood.
Steve -
July 13, 2021
Verified Purchase
Fit perfectly
Fast shipping parts fit good
Fred -
December 29, 2020
Verified Purchase
Excellent part supplier
Every aspect of the transaction was ideal. Quick, safe shipping, fair pricing and quality parts. Thanks much!
Guest -
June 6, 2020
Verified Purchase
Great part
Perfect fit. Just like OEM
Guest -
May 22, 2020
Verified Purchase
Nail gun condoms
Perfect fit for Senco finish nailers
Guest -
October 19, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
- 2
Product Information