Medium
30-60 minutes
This is a genuine Broan replacement part. The motor is designed by the manufacturer for use in ventilation fans and exhaust fans. This part is a complete motor assembly made primarily of metal, which is used to provide power to the blower wheel. You may require a screwdriver or wrench when replacing this item. This part is sold individually.
Motor S1101122
OEM part for: Nutone, Broan
Part Number: S1101122
$100.89
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Compatibility
This part will fit the following 11 machines
Broan
744 Ventilation Fan View Diagrams & Manuals
744FL Ventilation Fan View Diagrams & Manuals
744SFL Ventilation Fan View Diagrams & Manuals
744LED-A Recessed Fan/Light - 70 Cfm / 1.5 Sones View Diagrams & Manuals
744FL-B Recessed Fan/Light - 70 Cfm / 1.5 Soens View Diagrams & Manuals
744SFL-A Humidity Sensing Recessed Fan/Light - 70 Cfm / 1.5 Sones View Diagrams & Manuals
744FL-A Recessed Fan/Light - 70 Cfm / 1.5 Soens View Diagrams & Manuals
Nutone
744NT Exhaust Fan View Diagrams & Manuals
744SFLNT Exhaust Fan View Diagrams & Manuals
744FLNT Ventilation Fan View Diagrams & Manuals
744LEDNT Ventilation Fan View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Ventilation Parts
This part replaces obsolete part #: S97016454, S99080557, 97016454, 99080557
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Exactly what I needed, installed easily, works well!
I needed a replacement bathroom shower exhaust fan motor to replace a dead motor in a 17 year old fan and I didn't want to have to turn the matter into a major repair or reconstruction project. I found what I needed online after a relatively long search and a lot of scrolling and reviewing! It arrived on time and was exactly what I needed. I'm back in business! Thanks so much to Ereplacement Parts!
Guest -
September 23, 2023
Verified Purchase
Part return
I ordered a motor I later discovered I didn't need. Return process and forthcoming credit were handled quickly and efficiently. Great customer service.
Guest -
December 1, 2022
Verified Purchase
Replacement Bathroom Fan Motor
I was surprised that the motor with fan was shipped as a single unit. Quick and easy re-installation.
Guest -
May 24, 2022
Verified Purchase
Fan motor
Arrived in good condition and on time. Only negative was website said it came with instructions. There were none.
Guest -
July 21, 2022
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Motor
I have a Broan-Nutone 744A bathroom exhaust fan, and the motor has a 60 Hz 0.4A motor. Ser 222116M Mod B33AA02D73N+ and another number on the label 99080557. Will this replacement motor work?
Bill
for model number 744A
asked on 2022-12-26
Hello Bill, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: S1101122. We hope this helps, good luck with this repair!
eReplacementParts Team December 26, 2022
I have a Broan-NuTone 744-A (120 volts, 60 HZ, 1.2 Amps, 70 CFM, 1.5 Sones). Will this replacement motor work with this unit? I see various versions of the 744 model, but not the 744-A specifically, so I wanted to confirm before purchasing. Thank you.
John
for model number 744-A
asked on 2022-07-26
Hello John, Thank you for your inquiry. We have researched the model variation you have provided and confirm that this part will fit your model. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team July 26, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Old motor and impeller was noisy.
John - March 28, 2023
Tool Type
Ventilation
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Headlamp
Parts Used
1. Removed light bulb. 2. Unhooked two springs holding up white plastic lightbulb shroud. 3. Unplugged old motor. 4. Loosened two nuts holding light socket assembly and tucked that socket out of the way. 5. Loosened and removed three nuts holding in old motor and impeller assembly. 6. Carefully pulled out old motor and impeller assembly. 7. Inserted new motor and impeller assembly and started the three nuts. 8. Alternately tightened the three nuts. 8. Reinstalled two nuts holding the light socket assembly. 9. Plugged in the new motor into the special outlet on the side of the light socket assembly and tested the new motor. Nice and quiet. 10. Rehooked the two springs that hold up the white plastic decorative shroud. 11. Put the light bulb back in its socket.
When I looked into replacing this motor two years ago, the motor was being sold by itself without the impeller on the shaft. When I tried to remove the old impeller to reuse it, the set screw was seized onto the shaft. At the time I did not have a metric set screw hex set, so I simply cleaned the impeller thoroughly. That made things quiter - for a while only. Now in 2023, the motor is available with a new impeller already on its shaft. The new impeller is plastic and seems perfectly balanced. This made the whole replacement much easier. I only needed a 1/4” drive rachet with 3/8” sockets. A combo of one deep well socket, and one regular socket with an extension, seemed to work best for me to get at all the nuts, which have varying degrees of accessibility and visibility. A small LED headlamp was another change I made from my first attempt in 2021 that helped a lot!
When I looked into replacing this motor two years ago, the motor was being sold by itself without the impeller on the shaft. When I tried to remove the old impeller to reuse it, the set screw was seized onto the shaft. At the time I did not have a metric set screw hex set, so I simply cleaned the impeller thoroughly. That made things quiter - for a while only. Now in 2023, the motor is available with a new impeller already on its shaft. The new impeller is plastic and seems perfectly balanced. This made the whole replacement much easier. I only needed a 1/4” drive rachet with 3/8” sockets. A combo of one deep well socket, and one regular socket with an extension, seemed to work best for me to get at all the nuts, which have varying degrees of accessibility and visibility. A small LED headlamp was another change I made from my first attempt in 2021 that helped a lot!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Vent fan motor in shower
Michael - December 26, 2021
Tool Type
Ventilation
Difficulty
Medium
Time
30-60 minutes
Tools Used
Socket set
Parts Used
Removed old motor and replaced with the one I purchased from you.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
dead mouse found in fan of old motor; apparently jammed the fan and burned out the motor
Matt - August 27, 2021
Tool Type
Ventilation
Difficulty
Medium
Time
1-2 hours
Tools Used
Pliers, Nutdriver, stickum, step-ladder, flashlight
Parts Used
1. removed light bulb socket component with nut driver.
2. used nut driver and small vice grip pliers to overcome tight nuts.
3. removed old motor and fan; found dead mouse in fan assembly.
4. positioned new motor and fan assembly
5. used stick-um to hold not in nut driver to start the threading of the nut.
Could only get thumb and one finger into tight space to start threading the nut
6. reinstalled light socket assembly
7. plugged fan plug into light socket assembly.
8. store power and it all works
a flexible nut driver shaft might have made things easier but the plier allowed me to
torque the nut by clamping it on the handle of the driver
2. used nut driver and small vice grip pliers to overcome tight nuts.
3. removed old motor and fan; found dead mouse in fan assembly.
4. positioned new motor and fan assembly
5. used stick-um to hold not in nut driver to start the threading of the nut.
Could only get thumb and one finger into tight space to start threading the nut
6. reinstalled light socket assembly
7. plugged fan plug into light socket assembly.
8. store power and it all works
a flexible nut driver shaft might have made things easier but the plier allowed me to
torque the nut by clamping it on the handle of the driver
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Squirrel got into a duct and jammed motor
Anthony - December 30, 2018
Tool Type
Ventilation
Difficulty
Hard
Time
30-60 minutes
Tools Used
Socket set, allen wrench
Parts Used
Called an electrician as the workspace was too confined for me. He had prior experience
NOTE: Expedited delivery did not meet the promise. One day late. Fortunately the electrician was flexible.
NOTE: Expedited delivery did not meet the promise. One day late. Fortunately the electrician was flexible.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
