Easy
15-30 minutes
This is an authentic Ridgid replacement part that has been sourced from the original manufacturer to be used with circular saws. The durable plastic lever is used to turn the hex nut that secures the bevel or depth bolts. This item is used when adjusting the position of the blade depth or angle. This item is sold as an individual part.
Lever 522691002
OEM part for: Ridgid, Ryobi
Part Number: 522691002
$3.99
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 5 machines
Ridgid
R3205 Circular Saw View Diagrams & Manuals
R3204 6 1/2" Magnesium Compact Framing Saw View Diagrams & Manuals
R8653 18V Circular Saw View Diagrams & Manuals
R8652 18v Circular Saw View Diagrams & Manuals
Ryobi
R3205 R3205 7-1/4 In. Circular Saw 5-25-21 (Rev:05) View Diagrams & Manuals
This item works with the following types of products:
- Circular Saw Parts
- Saw Parts
Customer Part Reviews ?
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Lever
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Saw depth adjuster screw worn out.
george - January 2, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Circular Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set, Nutdriver, Allen wrenches
Removed old components replaced with new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
My circular saw was missing the parts that hold the table to adjust blade depth
David - January 2, 2022
Tool Type
Circular Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Wrench Set, Allen wrench
Screwed in the hex shaft that holds tension on the table slide, then attached the lever, sorting and screw to the hex shaft..
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The plastic lever was stripped
kenny - August 4, 2019
Tool Type
Circular Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Star wrench
Parts Used
Just used a star wrench to take off the old lever and replaced it with the new one from the replacement parts. Very simple but that lever is so important for my circular saw. Thank you for the easy purchase, shipment, and repair.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken lever
John - May 9, 2017
Tool Type
Circular Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Parts Used
Removed old lever by unscrewing bolt and spring
Put spring on then lever
Screwed bolt back on holding everything together
Put spring on then lever
Screwed bolt back on holding everything together
Did you find this story helpful?
Thanks for voting and helping fellow customers!
lever stripped out (Plastic)
James - November 6, 2016
Tool Type
Circular Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Allen wrench
Parts Used
1. Placed allen wrench in head of screw turned it counter clock wise out.
2. Removed new lever from package.
3. Place spring behind lever put screw into latch and screw into Saw body.
4. Tighten down to desired saw blade cutting debt.
2. Removed new lever from package.
3. Place spring behind lever put screw into latch and screw into Saw body.
4. Tighten down to desired saw blade cutting debt.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Power cord cut, angle selector snapped when saw dropped
jim - September 19, 2016
Tool Type
Circular Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Torx drivers
Parts Used
Removed screws, followed path of power cord through saw removed black and white connection screws and installed new cord. Unscrew the spring on angle selector and installed new one
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
