866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST

Large Axle Cover

Part Number: 286660
NordicTrackProFormFreemotion
Availability: 25+ in stock
Price: $4.58
Quantity:
Order within the next 13 hours
and your part ships today!
Description:
Genuine OEM replacement part, this item is sold individually.
This item secures the crank bushings, pedal arm sleeve and washer to the axle of the Elliptical Machines shown below.
To secure these part to the axle you will need part number 212055 Screw.
Product Information
Manufacturer: NordicTrack, ProForm, Freemotion
Product Number: 286660
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Related Products
Products Compatibility

This item works with the following types of products:

  • • Elliptical
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Elliptical
Parts Used:
Outside Crank Bushing - 244067
Pedal Arm Sleeve - 289867
Large Axle Cover - 286660
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen wrench
Pedal sleeve and axle cover cracked
Removed the locking allen screw from post
Slid old sleeve assembly off
Removed good inside bearing and put into new sleeve
Put new outside bearing into sleeve
Slid new assembly back onto post with new cover on outside
Put screw back on and tightened
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Elliptical
Parts Used:
Large Axle Cover - 286660
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Pedal Arm Sleeve was coming apart. I replaced both as well as the Large Axle Cover.
1. Removed both axle covers
2. Unhooked the arms from the pedal arm sleeves
3. Removed the sleeves
4. Pushed out the bearings on each side and placed them in the new sleeves
5. Used Teflon lube on both sides
6. Slid sleeves back on
7. Replaced axle covers on both sides
I only used a screwdriver, a rag, and some lubricant to do the job. Had a workout on the repaired machine and it worked great!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Elliptical
Parts Used:
Pedal Arm Sleeve - 289867
Large Axle Cover - 286660
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, allen wrench, hammer
Pedal arm sleeve rim fractured, broke away, and allowed the arm to wear into the cap.
1. Removed screw holding cap.
2. Removed sleeve.
3. Tapped bearings our of old sleeve.
4. Inserted bearings into new sleeve.
5. Put sleeve back on shaft.
6 Installed new cap.

Key point to note: Ordered parts on line on July 4. Order was filled that day and shipped the next day. Received parts several days later. Got status emails every step of the process. Couldn't have been better!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Elliptical
Parts Used:
Outside Crank Bushing - 244067
Pedal Arm Sleeve - 289867
Large Axle Cover - 286660
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen wrench
Parts worn
1. Removed old broken parts with an allen wrench
2. Replaced with new eReplacement parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Elliptical
Parts Used:
Pedal Arm Sleeve - 289867
Large Axle Cover - 286660
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen wrench
Pedal arm sleeve and axle cover broke
1. Removed screw, broken cover and sleeve
2. Replaced with new sleeve and cover
3. Screwed the screw and washer back in
4. Also replaced the axle cover
ALL DONE!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Elliptical
Parts Used:
Large Axle Cover - 286660
Pedal Arm Sleeve - 246373
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, just an allen wrench I think
Parts were worn out from much use(hour every day) since late 2011
My son had it fixed when I got home, however I was planning on doing it myself. Just remove the old arm sleeve, replace with the new one and apply the new large axle cover and tighten with allen wrench. It was a no brainer. I was impressed with the ease of ordering, the low shipping price and the fact that ereplacement parts had the exact book for my elliptical from Nordic track. I knew exactly the parts that I needed. I tried ordering on line and on the phone with the Nordic track company and it was a huge fiasco. My credit card wouldn't go through and I couldn't get anyone on the phone! Plus they were going to rake me over the coals with the shipping price! Thanks so much, because I need my elliptical!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Elliptical
Parts Used:
Pedal Arm Sleeve - 289867
Large Axle Cover - 286660
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Allen wrench
Pedal are sleeve and axle cover broke.
Remove pedal arm from arm sleeve. Used Allen head wrench to remove the bolt holding the axle cover and pedal arm sleeve on the axle arm. Slide pedal arm sleeve from axle arm, careful not to damage bearings on the axle sleeve. Use a screw driver to Carefully remove bearings from axle sleeve and inspect them to make sure they are in good working order. If the bearings are not in good condition, order new replacements before completing the repairs. Insert bearings in the new are sleeve the same way they were removed. Slide pedal arm sleeve onto axle arm, place axle cover onto the end of the axle sleeve and secure in place with bolt and washer. Clean any debris from the underside of the pedal arm then Re align pedal arm and secure in place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Elliptical
Parts Used:
Outside Crank Bushing - 244067
Large Axle Cover - 286660
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen wrench
Outside bushing and cover broke
Use correct size allen wrench to remove outside cover, pry both bushings out and replace inside the new one, replace new outside cover and it's ready for use.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Elliptical
Parts Used:
Pedal Arm Sleeve - 289867
Large Axle Cover - 286660
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen Wrench
After using the eliptical a while, the sleeve edges wore off.
I used an allen wrench to disassemble the sleeve and replaced the old bearings into the new sleeve. It was very easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Elliptical
Parts Used:
Pedal Arm Sleeve - 289867
Large Axle Cover - 286660
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Allen wrench
Worn out parts
Remove Allen screw and replace parts. That easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Large Axle Cover - ( 286660 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy