Genuine Manufacturer Sourced replacement part designed for Weber Grills. Igniter produces the spark to ignite the burner. Includes the 2-pole spark generator, collector box with electrode, push button cap, wire retainer and a battery.
Replacing this electronic ignition module is easy and does not require any tools
• Unplug the wires from the old ignition module
• Remove old igniter and replace it with a new one from the kit
• Unscrew the button that holds module to the unit
• Secure new module in place
• Install a "AAA" battery and secure the module with the button
• Connect the wires and test the unit
Igniter Kit 67726
OEM part for: Weber
Part Number: 67726
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.39 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 26 machines
Weber
This item works with the following types of products:
Repair Videos ?
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Igniter Kit
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Old Age & Disrepair
Tool Type
Outdoor Grill
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Wrench Set
As anticipated. a couple of screws were rusted and softened beyond usability. Thankfully I was able to find one that would work.
The grill looks and runs great.
I only wish that i knew there was hardware in the manifold kit so that I wouldn't have to buy and order it separately as I did.
Seven bucks down the drain.
All parts and website are the real deal.
I will most certainly look to this place for any and all Weber grill parts and needs.
Igniter was out on Weber Gas Grill !!!
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Clip couldn’t hold wires for electrical starter
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Electrical tape
igniter wouldnt work
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Burner tubes and igniter both disintegrates
Tool Type
Outdoor Grill
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Wrench Set
Parts Used
The ignitor ceramic would not attach to the burner tubes with the gas shroud, had to reuse old ceramic to new control unit. Burner tubes do not come with the screw to secure the terminal ends.
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Nutdriver, vise grips
Gently lift the left end of the burner tube and work them off the gas distribution manifold under the control knobs. Insert the middle burn bar and work onto manifold. Do not fasten yet. Repeat on rear bar. Insert cross over tube in hole on rear tube. Place front burner bar through hole to manifold and insert cross over tube in hole on other end. Gently work the tube into manifold and don't pull cross over tube out of either burner tube. Once all tubes are back in place, secure with the 3 screws on the left ends. Note that the hardware that comes with the tubes is for the manifold end and I did not use these. I wish the tubes came with these 3 screws. Slide the igniter into the ears on the front burner tube until it stops. Secure wire with the plastic clips to the manifold. Push new igniter control box into position until tabs lock, then connect the wires from the igniter. Install the AAA battery (not that it only works when battery is installed correctly). Screw on button. Reinstall the bottom pans, flavorizer bars and grates.
Gas grill electric starter broken.
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
2. Replaced with the new starter.
Ignitor button broke off
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
The old one was not working from age
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Corrosion
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Parts Used
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.