Medium
15-30 minutes
This is a genuine manufacturer-approved replacement component which is specially designed for Kohler faucets. The hose assembly delivers water and provides a user with an extended reach. Unfortunately, over time this part can wear out or get damaged eventually requiring a replacement. Keep in mind this high-quality hose assembly is made of durable materials and is sold individually. Please make sure to refer to the owner's manual for your model to ensure the proper repair procedure.
Hose Assembly, Kitchen 1013839-CP
OEM part for: Kohler
Part Number: 1013839-CP
$98.89
In Stock
Ships within 1 business day 
Compatibility
This part will fit the following 2 machines
Kohler
K-690 Vinnata Kitchen Sink Faucet View Diagrams & Manuals
K-692 Clairette Kitchen Sink Faucet View Diagrams & Manuals
This item works with the following types of products:
- Faucet Parts
Customer Part Reviews ?
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Hose Assembly, Kitchen
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Leak between hose and spray nozzle
Jim - February 10, 2016
👍 8 of 12 people found this instruction helpful
Tool Type
Faucet
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Adjustable Wrench
Parts Used
First make sure the water source is turned off. Then detach the bottom part of the hose from the water source. There is a plastic connector with a lever that you squeeze. Pull and and the hose should pop right out. Next, unscrew the spray nozzle, you will need a wrench. Pull the hose through the faucet cylinder.
The tricky part is when you feed the new hose through the faucet cylinder. The cylinder is divided in two: one side for the hot and cold water feeds, the other for the hose that attaches to spray nozzle. You will need to unscrew the faucet cylinder from the basin in order to get the right angle to pass the hose attachment through the cylinder.
Once the hose is passed through just snap the bottom part of the hose into the source and screw the spray nozzle to the top end of the hose. Remember to use the silicone provided in the replacement package on the rubber washers. It preserves the washers and ensures a water tight seal.
The tricky part is when you feed the new hose through the faucet cylinder. The cylinder is divided in two: one side for the hot and cold water feeds, the other for the hose that attaches to spray nozzle. You will need to unscrew the faucet cylinder from the basin in order to get the right angle to pass the hose attachment through the cylinder.
Once the hose is passed through just snap the bottom part of the hose into the source and screw the spray nozzle to the top end of the hose. Remember to use the silicone provided in the replacement package on the rubber washers. It preserves the washers and ensures a water tight seal.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The hose was leaking at the ball joint near the attachment to the shower end of the faucet.The leak was sufficient to spray some water thru the faucet neck down under the sink.
Michael - July 1, 2022
Tool Type
Faucet
Difficulty
Medium
Time
30-60 minutes
Tools Used
Adjustable Wrench, String
Parts Used
I shut off water input at the sink and disconnected the old sink hose from the flexible water line.
As suggested online, I attached a string to the end of the hose under the sink and pulled the old hose out thru the top.
It got stuck but after a few tense moments and thoughts of alternative approaches, some twisting and nudging of the hose loosened it and I was able to pull it completely out. After unscrewing the shower end from the old hose with an adjustable wrench and attaching it to the new hose to which the string was attached, I pulled the new hose thru from underneath with the string.
It once again got stuck but I was able to quickly get it unstuck again and all the way thru. I then reconnected the water input and turned on the water.
Success. It fundamentally should be an easy repair but the passing of the hose thru the faucet was a little more tricky than described.
As suggested online, I attached a string to the end of the hose under the sink and pulled the old hose out thru the top.
It got stuck but after a few tense moments and thoughts of alternative approaches, some twisting and nudging of the hose loosened it and I was able to pull it completely out. After unscrewing the shower end from the old hose with an adjustable wrench and attaching it to the new hose to which the string was attached, I pulled the new hose thru from underneath with the string.
It once again got stuck but I was able to quickly get it unstuck again and all the way thru. I then reconnected the water input and turned on the water.
Success. It fundamentally should be an easy repair but the passing of the hose thru the faucet was a little more tricky than described.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Moen pull out kitchen sink faucet hose was leaking.
Carlton - February 1, 2018
👍 0 of 1 people found this instruction helpful
Tool Type
Faucet
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Adjustable Wrench, String
Parts Used
Turned off the water supply.
Disconnected the lower hose from the feed line.
Tied a string to the end of the hose.
Disconnected the faucet sprayer head from the hose.
Pulled the old hose through the faucet.
Removed the string and tied it to the end of the replacement hose and pulled from below/fed it back through the faucet.
Removed the string and connected the hose back to the feed.
Put spray head back on faucet.
Turned on water. Job finished.
Disconnected the lower hose from the feed line.
Tied a string to the end of the hose.
Disconnected the faucet sprayer head from the hose.
Pulled the old hose through the faucet.
Removed the string and tied it to the end of the replacement hose and pulled from below/fed it back through the faucet.
Removed the string and connected the hose back to the feed.
Put spray head back on faucet.
Turned on water. Job finished.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
