Easy
Less than 15 minutes
This sander pad is a genuine manufacturer approved replacement part. It is specially produced for use with Hitachi random orbit sanders. It features a foam body attached to a hard plastic backing plate. It also has a sturdy velcro style bottom for use with hook and loop sandpaper. Includes one (1) pad per order. Please note screws used to secure it are sold separately.
To install a new pad you should only need a screwdriver.
• Make sure the sander is unplugged
• Remove the screws that secure the pad
• Remove old pad and secure the new one
• Tighten the screws and test the sander
Hook And Loop Sander Pad 376692
OEM part for: Metabo HPT (Hitachi)
Part Number: 376692
$17.61
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Product Description ?
- Classification: Accessory
- Weight: 0.13 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 3 machines
Metabo HPT (Hitachi)
SV13YA 5" Variable Speed Random Orbit Finishing Sander View Diagrams & Manuals
SV13YB 5" Single Speed Random Orbit Finishing Sander View Diagrams & Manuals
SV13YSTM 5 Inch Random Orbit Sander W/8 Hole Pad And Hose Attachment View Diagrams & Manuals
This item works with the following types of products:
- Sander Parts
This part replaces obsolete part #: 324209, 324-209
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Sanding Pad
The pad works perfectly. Thank you for the quick response.
Guest -
June 17, 2022
Verified Purchase
hook and loop sander pad
Every time I use your site, I am ALWAYS pleased with your service and most of all, Your employees. I have suggested it to many friends.
Kirk -
May 5, 2022
Verified Purchase
Easy order and fast delivery.
Product came quickly . Good quality and easy order.
Guest -
January 11, 2022
Verified Purchase
Easy repair and was what I wanted
My sander is working well and is in good condition again.
Thomas -
November 4, 2020
Verified Purchase
As advertised
The part I ordered was exactly what I needed. It got here in a reasonable amount of time. Works well, thanks
Guest -
August 20, 2020
Verified Purchase
easy replacement and worked exaactly as expected
the part was an exact replacement and made my sander work like new
Guest -
August 24, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Hook And Loop Sander Pad
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Sanding pad worn
Ron - April 6, 2016
👍 7 of 7 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Simply remove the 3 screws that are holding the worn pad to the sander, then remove the old pad. Line up the new pad to the screw holes and screw the new pad to the sander.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Hook & loop didn't hold sandpaper.
Ruth - February 2, 2017
👍 3 of 3 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed the old pad. and attached the new pad. Simple, the part works great!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old pad worn out
Art - September 6, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Removed screws and pad, replaced with new pad and screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Hook & loop pad worn out
Robert - October 5, 2022
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Installed the new pad with the original three screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Hook and Loop pad worn out
will - September 7, 2018
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed 3 screws, removed worn out pad and replaced with new pad.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Velcro sanding discs would not stay because the sanding pad was wore down
John - July 18, 2018
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Unscrewed three screws, removed the pad and replaced it with the new one
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sander pads worn out
John - June 29, 2018
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Remove old pad and replace with new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sanding discs wouldn't stick
Dan - December 27, 2017
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Took three screws out, removed part. Installed new part, replaced screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Disk for holding sandpaper wore out
Joel - December 15, 2017
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Three screws held the old pad on and I took screws out and replaced pad and put screws back in,
easy
easy
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sander
Dan - December 8, 2017
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1. Removed old part
2. Installed new part
2. Installed new part
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
