eReplacementParts.com
877-346-4814
Makita Parts
Repair Parts Home
  
Power Tool Parts
  
Makita Parts
  743081-8 Hook And Loop Sander Pad

Hook And Loop Sander Pad 743081-8

OEM part for: Makita

Part Number: 743081-8


Install
Videos!
Grid squares measure 1x1 inch
In Stock
Order within the next 8 hours and your part ships today!
Easy Less than 15 minutes (49 rated repairs)?
OEM: Original Equipment Manufacturer ?
Makita
Does this d-block d-md-none fit my product?

Product Description ?

This hook-and-loop sander pad is a direct replacement for many Makita orbital sanders. It is a genuine Makita part, not off-brand. It features a foam body attached to a hard plastic backing plate. It also has a sturdy Velcro style bottom for use with hook-and-loop sandpaper. This pad has eight vacuum holes and is 5" in diameter.

This pad is compatible with the Makita sanders listed below.

  • OEM Makita sander pad
  • Hook and loop (velcro) underside
  • Eight vacuum holes
  • Classification: Accessory
  • Weight: 0.09 lbs.
  • Shipping: Ships Worldwide

Compatibility

This part will fit the following 21 machines

Makita

BO5021K Sander View Diagrams & Manuals
BO5010 Random Orbit Sander View Diagrams & Manuals
BO5021 Random Orbit Sander View Diagrams & Manuals
BO5020 Random Orbit Sander View Diagrams & Manuals
BO5011 Random Orbit Sander View Diagrams & Manuals
BO5012 5 inch Random Orbit Sander View Diagrams & Manuals
BO5030 5" Random Orbit Sander View Diagrams & Manuals
BO5031K Random Orbit Sander View Diagrams & Manuals
BO5041K Random Orbit Sander View Diagrams & Manuals
BO5021K (Type 2) Sander View Diagrams & Manuals
BO5021 (Type 2) Sander View Diagrams & Manuals
BO5030K Sander View Diagrams & Manuals
BO5031 Sander View Diagrams & Manuals
BO5041 Sander View Diagrams & Manuals
LXOB01 Sander View Diagrams & Manuals
LXOB01Z Sander View Diagrams & Manuals
LXOB01Z (Type 1) Sander View Diagrams & Manuals
LXOB01Z (Type 2) Sander View Diagrams & Manuals
XOB01T Sander View Diagrams & Manuals
XOB01Z Sander View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Sander Parts

This part replaces obsolete part #: 743051-7

Repair Videos ?

Watch the Repair Video for Hook And Loop Sander Pad
Articles:
Step-by-step instructions for removing and installing the sanding pad on your Makita sander....
June 20, 2018

Customer Part Reviews ?

4.7
Average Rating (out of 5):
44 Reviews
Click to filter by ratings:
5 stars
38
4 stars
4
3 stars
0
2 stars
0
1 stars
2
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
  • 3
NEXT >
  • quick delivery
    Part is as expected.
    Guest - September 26, 2023 Verified Purchase
    GREAT SERVICE, THE FIRST PLACE I GO TO.
    THE PART ARRIVED WELL PACKAGED AND I AM BACK AT WORK.
    Guest - May 23, 2023 Verified Purchase
    Getting the part was easy
    Thought I never would find a replacement part and be forced to ditch the rotary sander. Looked online at eReplacementParts, found the exact part I needed, and they shipped it out right away. I am a happy camper again.
    Guest - May 1, 2023 Verified Purchase
    Long standing issue with Makita. Out of warranty and needed the replacement pad. Had the part and delivered in a couple days. You tube video showed how to install. All great.
    Part was perfect. Looked like OEM made...
    Guest - July 23, 2022 Verified Purchase
    fast service
    exact replacement
    Guest - July 18, 2022 Verified Purchase
    Easy repair!
    The new pad for my orbital sander fits perfectly and works great
    Rani - December 14, 2021 Verified Purchase
    Easy repair
    My Makita random orbit sander wasn't holding the sanding disks that had been removed a couple of times. Since they still had life in them, I wanted to get a new pad on my sander. It grips the disks just like the original pad and will likely extend the life of my sander a few years. I am pleased with this easy repair - just three screws. With some dust cleanup it was only a 5 minute job.
    Guest - October 25, 2021 Verified Purchase
    Easy fix
    Original part, cost a little more, but not will last longer I'm sure. Mail slow as usual. 2 min. fix after receiving part. back in operation quickly.
    Guest - July 31, 2021 Verified Purchase
    Easy repair
    Easy part to find, quick service, received in a few days. And it fit!
    Guest - June 29, 2021 Verified Purchase
    Sander Pad
    Ordering the sander pad I needed was so quick and easy. The pad arrived promptly. Good service!
    Guest - June 17, 2021 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Hook And Loop Sander Pad


    Will sanding disk 743081-8 fit a BO5001 sander?
    Brian for model number 743081-8 asked on 2022-04-28
    Hello Brian, thank you for writing. The model BO5001 shows only the Hook and Loop Sander Pad part 196905-1. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
    eReplacementParts Team April 28, 2022

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy Less than 15 minutes (49 rated repairs)?

    Original pad coming apart.

    Maurice - December 24, 2015
    👍 18 of 18 people found this instruction helpful
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Remove the 3 screws holding the pad, remove the pad. Then using the same screws, screw the new pad on the sander
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    The rubber pad separated from the face of the pad as it was over 10 years old.

    Richard - June 7, 2016
    👍 11 of 11 people found this instruction helpful
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    I ordered a new hook and loop pad and it fit perfectly, I was finished in less than five minutes and ready to sand. Remove three screws and the old pad. Screw the new pad on with the three screws.

    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Hook & loop flattened

    nevton - July 9, 2016
    👍 5 of 5 people found this instruction helpful
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Just replaced the old worn part, simple repair using a screwdriver.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Pad deteriorated after a 13 year period (which I think is to be expected)

    Chet - June 1, 2016
    👍 6 of 7 people found this instruction helpful
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Remove old pad (three screws). Install new pad (same screws). Do not lose screws!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Discs would not stay on pad.

    Robert - July 1, 2016
    👍 4 of 4 people found this instruction helpful
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Remove three screws and put the new pad on with same three screws. Less than 5 minutes!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Sander pad broke

    Marsha - September 28, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    3 screws, no brainer, very easy replacement.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Sander pad was old and separated.

    Patrick - June 6, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Loosen 3 screws to take off old and tighten 3 screws to put on new part. Done.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Pad wore out

    douglas - April 30, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed three screws, removed the old pad, then used the screws to put the new pad on.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Pad had tore up

    Fred - March 27, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Unscrew the old one, then replace it with the new one
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Hook & loop sanding broke

    michael - September 15, 2018
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed remains of old sanding pad installed new sanding pad , 3 screws
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal