Easy
15-30 minutes
Grind Fan Assembly SP0001576
OEM part for: Breville
Part Number: SP0001576
$4.99
In Stock
Order within the next 5 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This Grind Fan Assembly will fit the following 1 machine. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Breville
This item works with the following types of products:
- Espresso Parts
This part replaces obsolete part #: BES870XL/06.30, BES870XL06.30
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Grind Fan Assembly
Does this part (SP0001576) include the (2) metal washers and (1) felt washer? I will need them.
Alex
for model number BES870XL/A
asked on 2022-05-02
Hello Alex, Thank you for your inquiry. We show that the metal washers part# SP0001574 and the felt washer part# SP0001575 do not come with this part and are available separately. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team May 02, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
While cleaning the grinder for the first time I did not realize that there were small parts below the hollowed grind fan part of the system & accidentally sucked them up with my vac.
Barry - November 24, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Espresso
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set, Vaccumn
Simple Job
1. Again removed the grinder hopper
2. Vac.'d out & fully cleaned burr
3. Unscrewed all parts as previously done.
4.Finished cleaning again.
5. Replaced missing parts as indicated in your drawings
6. Reassembled unit.
7. First test of repair proved REPAIR & PARTS WORKED PERFECTLY.
I could not have done, or even found the right parts, without your great drawings. You have my undying thanks for that.
I was very happy with your service and should the need arise I will do so again.
1. Again removed the grinder hopper
2. Vac.'d out & fully cleaned burr
3. Unscrewed all parts as previously done.
4.Finished cleaning again.
5. Replaced missing parts as indicated in your drawings
6. Reassembled unit.
7. First test of repair proved REPAIR & PARTS WORKED PERFECTLY.
I could not have done, or even found the right parts, without your great drawings. You have my undying thanks for that.
I was very happy with your service and should the need arise I will do so again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Setting for amount of coffee ground needed to be close to maximum
Juergen - July 8, 2023
Tool Type
Espresso
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Adjustable Wrench
1. Removed hopper
2. Vacuumed out grinder assembly
3. Unlocked and removed outer grinder
4. Removed cap nut that's holding inner grinder, then removed inner grinder
5. Removed washers
6. Removed grind fan assembly
7. Replaced felt washer
8. Inserted grind fan assembly
9. Put replacement washers back in place
10. Put cap nut back in place and tightened nut
11. Put replacement outer grinder back in place and locked it in place
12. Checked distance between outer and inner grinder, factory setting of 5 was adequate (minimal to none metal grinding noticable
13. Put bean hopper back in place
14. Adjusted grind of beans
15. Adjusted setting for amount of coffee ground
-> now the setting is a little below 1/4 - >-> like new!
2. Vacuumed out grinder assembly
3. Unlocked and removed outer grinder
4. Removed cap nut that's holding inner grinder, then removed inner grinder
5. Removed washers
6. Removed grind fan assembly
7. Replaced felt washer
8. Inserted grind fan assembly
9. Put replacement washers back in place
10. Put cap nut back in place and tightened nut
11. Put replacement outer grinder back in place and locked it in place
12. Checked distance between outer and inner grinder, factory setting of 5 was adequate (minimal to none metal grinding noticable
13. Put bean hopper back in place
14. Adjusted grind of beans
15. Adjusted setting for amount of coffee ground
-> now the setting is a little below 1/4 - >-> like new!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
