*This part replaces obsolete part #: and G515-4800-W1.
Product Information
Manufacturer: Char-Broil |
Product Number: 3488898 |
Classification: Part |
Weight: 2.45 lbs. |
Also Known As: Housing Emitter Tray, Cooking Grate Housing, Bottom Tray |
Shipping: Ships Worldwide |
Description:
Genuine Char-Broil replacement part, this item is sold individually. The Lower Grate Housing is placed underneath the 3486613 Cooking Grates. It helps distribute the heat evenly on the Grill. Over time it will collect food particles and grease from the Cooking Grates. It can be removed and cleaned with soap and water. Size: 18.4" L X 8.7" W |
Compatibility
This part is compatible with the following machines:
Char-Broil
463257111 3-Burner Infrared Grill
463243911 Quantum Infrared Urban Grill
463270909 Infrared 3-Burner Dual Fuel Grill
463270610 Quantum Infrared Urban Grill
463246909 Commercial Series Infrared Urban Grill
463247109 Commercial Series 500 Three-Burner Infrared Grill
463243812 Tru-Infrared Gas Grill
463247412 Tru-Infrared Gas Grill
463271009 Quantum Infrared Grill
463243911 Quantum Infrared Urban Grill
463270909 Infrared 3-Burner Dual Fuel Grill
463270610 Quantum Infrared Urban Grill
463246909 Commercial Series Infrared Urban Grill
463247109 Commercial Series 500 Three-Burner Infrared Grill
463243812 Tru-Infrared Gas Grill
463247412 Tru-Infrared Gas Grill
463271009 Quantum Infrared Grill
463257110 Three-Burner Infared Grill
463246910 Infared Urban Grill
466257110 Commercial Series Three-Burner Infrared Grill
466257111 Commercial Series
466270909 Quantum Three-Burner Dual Fuel Grill
463270910 Quantum Infrared Three-Burner Dual Fuel Grill
463270911 3-Burner Grill with Sideburner
466270611 Quantum Infrared Urban Grill
463246910 Infared Urban Grill
466257110 Commercial Series Three-Burner Infrared Grill
466257111 Commercial Series
466270909 Quantum Three-Burner Dual Fuel Grill
463270910 Quantum Infrared Three-Burner Dual Fuel Grill
463270911 3-Burner Grill with Sideburner
466270611 Quantum Infrared Urban Grill
Questions & Answers
Are the replacement parts stainless steel?
Karen
for model number 463243911
Hi Karen, thank you for your question. Yes. These parts would be stainless steel, they are direct OEM replacements for your original parts. Good luck with your repair.
Do you carry the grilling grates for this older model grill?
Rose
for model number 463811904
Hello Rose, Thank you for the question. I looked up the part and it is listed as No Longer Available/Discontinued. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
Are these the correct size for my model number?
Franzi
for model number 463243911
Hi Franzi, thank you for your question. Yes, this is the correct part for your model number. Good luck with your repair.
Will the trays fit my grill? Put 2 grates18-3/8 x 17-1/2
& Lowes did not have the housing trays.
Charles Kelly
charles kelly
for model number #463243812
Hello Charles, thank you for your question. Yes, this part is compatible with your specific model. Good luck with your repair!
I need to replace all the cooking portion of my grill. There are 2 sides.
What should I order?
Thanks
Mike
for model number 463243911
Hello Mike, thank you for your inquiry! The cooking portion of your grill includes these parts:
Top Cooking Grate
Part Number: 3486613
$19.99
Flame Tamer
Part Number: G501-0008-W1
$14.81
Main Burner
Part Number: G515-2200-W1
$14.81
Electrode For Main Burner
Part Number: G515-0067-W1
$7.71
Flame Carryover Tube
Part Number: G354-0024-W1
$3.99
These parts are sold in a quantity of 1, so you will need to purchase 2 of each.I hope this information helps!
I need just the cooking grates and top warming shelf or whatever it is called. What should I order?
Thanks
Mike
Mike
for model number 463243911
Hello Mike, thank you for your inquiry! The cooking grate is part number 3486613 and the warming rack is part number G350-0051-W1. I hope this information helps!
I received the grates for my grill and I assume the tray was a part of it. What do I need for the tray?
Mike
Mike
Hello Mike, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Hello, I am having . hard time finding replacement lower Infrared grates for 3 burner . Charbroil IR grill- model number above.. Can you help?
Billy
for model number 463242516
Hello Billy, thank you for inquiring. The replacement Infrared Cooking Grate for your model is part number G466-0025-W1A. Good luck with your repair!
Will this emitter work for my model (Char-broil) grill? Thanks
Jim Warren
for model number 463250212
Hello Jim, I am not showing this emitter as compatible with your model. I recommend contacting the manufacturer for a part number. If they are able to provide you one please check on our site as we may carry the part.
Char-broil commercial T-36D
I need the replacement cooking grates & trays for this model grill. What are the correct part numbers?
Thanks
Steve
for model number 463247412
Hello Steve, thank you for your inquiry! The part number for the grates is G501-0077-W1 and the tray is part number 3488898. I hope this information helps!
good morning,
I would like lower housing tray for the model # 463343819. It does not come with one I was just wondering if they made one for it ?
alan
for model number 463343819
Hello Alan, Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
I have a huntington cast grill, the heat/vent plate has fallen apart which one replaces it it measures 20x81/2
erin
for model number 6301-14
Hello Erin and thanks for writing.
According to our database, the model number you provided is just a portion of a model number with multiple possible variations. To ensure that we recommend parts that will work for your model, please recheck your information; you will need to provide us with the full model and serial numbers located on the sticker on the unit itself.
Once we have that information, we would be happy to find the part you need.We do carry a lot of other spare parts for units such as yours, for example, Part Number:G501-0008-W1. Good Luck with your repair.
18.4" means what
i understand the 8 inches, the .4 confuses me. please brake it down to stupid terms. thanks
reggie
Hello Reggie, thank you for your inquiry! 18.4 inches is equivalent to 46.7 centimeters and 8.7 inches is equivalent to 22.1 centimeters. I hope this information helps!
463242715 is the model number from the sticker on my grill, when I type it in your website tells me there are no matches for this part number. I need to order the infared and grill grates for my grill
Gary
for model number 463242715
Hello Gary and thanks for writing.
It is possible that part # 3488898 will fit with your unit, however, as we do not have your model number in our database we can not guarantee the fit. We hope this helps. Please contact us anytime.
can I use infrared grill grates on my Char-Broil Gas Grill 463625219
Melvin
for model number 463625219
Hello Melvin, and thanks for writing.
The model number you provided is not recognized. Please verify the number you provided us. If it is correct, we recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. It is possible that part #3488898 might work with your unit, however, as we do not have your model number in our database we can not guarantee the fit. We hope this helps. Please contact us anytime.
Repair Instructions: Submitted by Customers Like You
23 of 27 people found this instruction helpful
Tool Type:
Outdoor Grill
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, none
Old grates had to be replaced
Just remove the old ones, then replace the new grates in place- very easy
Did you find this story helpful?
Thanks for voting and helping fellow customers!
13 of 17 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Lower grate rusted out.
Replaced with new grates.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
8 of 10 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The plate was rusted out
The new part fit just fine and went right back in where the old one came out.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 7 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, no tools needed, just a pair of gloves
Original lower grate housing was rusted
The original lower grate housings last about 3 years. Check them regularly and replace when needed.
Separate cooking grate from lower grate housing and replace, Wear a pair of work gloves to protect your hands.
Separate cooking grate from lower grate housing and replace, Wear a pair of work gloves to protect your hands.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 6 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
, Wire brush & my hands
After about 5 years, the grille needed some replacement parts.
Lifted out old upper & lower grates, brushed & cleaned around the edges & bottom of firebox and vacuumed out all the debris. Then I quickly wiped out what didn't lift with the vacuum. Dropped in new grates. Installed new ignition module, it was easy enough to remove the retaining nut on the module by hand, unplugged the wires for the igniters, and installed the new module, by hand. Reconnecting the wires was very straightforward, so long as you keep the leads for the switch separate from the wires for the igniters (my grille has 4)
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Hands
Rusted out
Ordered new parts and installed
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Grates rusted on old grill
Replaced with new grates
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Rusted after 10 years of use.
Lifted old ones out. Slipped new ones in. Easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No tools required.
The grill housing trays were starting to disintegrate.
The parts were a perfect fit for my grill. Removed old trays, inserted new ones.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No tools required.
Grill trays rusted out after many years of service
Removed cooking grates and trays, replaced trays with new ones and reinstalled the cooking grates
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
25 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
21
4 stars
3
3 stars
1
2 stars
0
1 stars
0
< PREV
- 1
- 2
- 3
Perfect replacement
Arrived in a few days after ordering. Parts quality and fit are excellent.
Guest -
20 days ago
Verified Purchase
Worked great
Fit perfectly
Guest -
23 days ago
Verified Purchase
PARTS FIT GRILL PERFECTLY LOOKS BRAND NEW
PART WAS ACTUALLY AS DESCRIBED FIT GRILL GREAT AND CAME ON SCHEDULE
Guest -
October 2, 2019
Verified Purchase
Worked as expected
Fit perfectly
Stephen -
September 3, 2019
Verified Purchase
part was as expected
I was pleased that the replacement part was available and that it was a perfect fit. Thank you!
Guest -
September 3, 2019
Verified Purchase
housing tray just like the original
Quick mailing, excellent quality, fits in just like it was the original. Really do believe infrared works way better than open flame grills but takes a little practice.
Guest -
August 29, 2019
Verified Purchase
Grill Part
Our grate housing tray arrived in a couple days after ordering.
Guest -
August 22, 2019
Verified Purchase
Perfect match!
Received promptly, fit perfectly, good to go!
George -
August 18, 2019
Verified Purchase
Replacement Grid was perfect fit.
The replacement grids fit and worked perfectly on my grill.
Guest -
August 5, 2019
Verified Purchase
Exactly what I needed
Needed part for my bbq unable to find in local stores but you had exactly what I needed. Thank you.
Guest -
August 1, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
- 2
- 3
Product Information
Manufacturer: Char-Broil |
Product Number: 3488898 |
Classification: Part |
Weight: 2.45 lbs. |
Also Known As: Housing Emitter Tray, Cooking Grate Housing, Bottom Tray |
Shipping: Ships Worldwide |
Repair Guides
Related Products