It is an authentic manufacturer-sourced replacement part which is specially designed for use with Craftsman Trimmers. The Gearbox Assembly contains the gears that turn the line spool for cutting. The most common reason for replacing the gearbox assembly is if the trimmer head is not spinning or there is grinding noise coming from the trimmer head. The gearbox assembly includes 3 screws, mounting hardware, Cap, and the Head assembly. Tools that you will need to replace the gearbox assembly are a Small screwdriver or hex wrench, Phillip’s screwdriver and a Socket/Ratchet set (or wrench set).
Gearbox Assembly 753-06882
OEM part for: Craftsman
Part Number: 753-06882
Compatibility
This part will fit the following 5 machines
Craftsman
This item works with the following types of products:
- Trimmer Parts
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Gearbox Assembly
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The gears were stripped after 2 yrs old.
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
The Trimmer head gears/ gear was stripped.
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
LOwer drive broke and stuck in gear box
Tool Type
Trimmer
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Socket set
disconnected gear box and put new one on
put in new lower drive
tighten all screw
done!
parts fir perfectly ---runs like a charm.
you guys are great at finding correct OEM parts.
Needed the lower tube and gear box
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set
The weed wacker would spin very slowly but eventually stop.
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Nutdriver
Parts Used
Gears stripped out in trimmer head
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
Parts Used
installed new gearbox and installed new screws. Added trimmer line and job finished.
Gears worn out
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set, Wrench Set
Parts Used
Gears got grined out on themselves
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Hex head bit
Parts Used
2. Install new part and align holes. Insert the hex head screws.
3. Tighten screws then check installation by starting the edger.
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.