Easy
15-30 minutes
The purpose of a gauge is to register the pressure readings inside the tank. This replacement gauge is sourced directly from original equipment manufacturer for use with Campbell Hausfeld air compressors. The dial reads 0-250 PSI. Please note this gauge has a durable metal body and it is sold individually. You should only need a wrench and a thread-sealing tape to complete this repair.
Pres Ga 250psi Sd Mnt Nochlogo GA016306AV
OEM part for: Campbell Hausfeld, Husky
Part Number: GA016306AV
$11.52
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Pres Ga 250psi Sd Mnt Nochlogo will fit the following 421 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Campbell Hausfeld
Husky
Show More Compatible ModelsThis item works with the following types of products:
- Compressor Parts
- Pump Parts
This part replaces obsolete part #: GA016305AV, GA016303AV, GA016313AV, GA016302AV, GA016300AV, GA016308AV, GA016310AV, GA016102AV, GA016304AV
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
9
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Easy to order and arrived on time
The part was a perfect replacement and is working well
Guest -
July 15, 2023
Verified Purchase
easy repair
prefect fit
Guest -
January 4, 2022
Verified Purchase
quality gauges
my air compressor is 13 yrs old and will never change it. I found my parts and couldn't believe eReplacements had them they were so helpful and took time to get me in the right directions with the parts i needed.and rebuilt my compressor which is good as new .
Guest -
December 9, 2021
Verified Purchase
Replacement for damaged parts
I am so grateful these gauges are a perfect match to the original parts . I have been getting parts for years and never disappointed. Thank you
Guest -
July 5, 2020
Verified Purchase
Easy repair
For a few dollars I now have a like new compressor. Older gauges were hard to read, not any more!
Guest -
November 28, 2019
Verified Purchase
easy to replace
evry thing i ordered to fix my air comp.all worked great thanks
Guest -
November 12, 2019
Verified Purchase
Your service was great. Thanks for your help!
The parts arrived and were all correct, thanks again.
Guest -
October 3, 2019
Verified Purchase
Prompt service and correct part.
Gauge fit perfect. Right part at a good price.
JOHN -
August 19, 2019
Verified Purchase
Great replacement pressure gauge
Great replacement pressure gauge; arrived quickly, works as expected. Comes with sealant already applied to the threads to make installation simple.
robert -
April 22, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Pres Ga 250psi Sd Mnt Nochlogo
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Regulator stopped working
Chris - August 2, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Compressor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set, plumbers tape
Very easy.
Remove old parts.
Wrap threads with tape.
Install new parts.
Set regulator for desired cutoff psi. (they put wax over screw, remove wax and fill tank to desired psi and turn screw to the left until you hear "click". Regulator psi now set.)
Remove old parts.
Wrap threads with tape.
Install new parts.
Set regulator for desired cutoff psi. (they put wax over screw, remove wax and fill tank to desired psi and turn screw to the left until you hear "click". Regulator psi now set.)
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Parts damaged in move
James - July 18, 2023
Tool Type
Compressor
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
Unscrewed broken part and screwed in replacement part.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Gauge was damaged when compressor feel over
Len - April 4, 2020
Tool Type
Compressor
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
Removed broken gauge, replaced with new gauge.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
replace parts on compresser
jerry - November 14, 2019
Tool Type
Compressor
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Wrench Set
none
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Porter Cable compressor 2002 leaking air near motor
Stephen - April 15, 2019
Tool Type
Compressor
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Power Drill, Socket set, Torx bit and extension
Parts Used
Checked eReplacement parts for tips on what could be the problem. First was a bad drain valve. I knew that was okay. Second was the tube seal inside the motor. Great. It was only around $12 or $13, and I need the compressor, so I sent for the part. Taking these red pancake compressors apart is complicated and time consuming. Also you need a very long Torx bit or an extension for your drill that fits inside a small tube where the screws holding the black plastic motor housing together. Just took my time and finally got it separated. It's fairly simple here, but the gasket will shred when you separate the head from the motor. You need to order a gasket along with the tube seal. Also the two facing parts will need to be cleaned and polished enough to make a nice smooth seal when you put it back together. Changing the tube seal is easy if you're careful. Watch how it all fits together when you take the tubing out of the motor and housing so you can reassemble it correctly. If you take your time and are patient with each section, you should be able to put it back together and it should work just fine (assuming that was your problem in the first place!) Very happy with eReplacement parts. They have saved many appliances and tools by showing me how to fix them and having the right parts. Bravo!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Pressure switch would not turn off when proper cutout pressure reached
Ronald - February 5, 2019
Tool Type
Compressor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Wrench Set, Adjustable Wrench
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Pressure gauge and regulator wasn't working properly.
Robert - January 24, 2019
Tool Type
Compressor
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Nutdriver, Adjustable Wrench, No other tools
Removed both gauges and regulator. Replaced.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Compressor was leaking air until you set the pressure above 100psi
Kevin - August 20, 2018
Tool Type
Compressor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Adjustable Wrench
Had to remove the cover. take the gauge off, then you are able to remove the valve. Reverse the process to put it back together. Dont forget teflon tape or seal the threads.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Air preasure guages were rusted and could not read.
Rick - July 3, 2018
Tool Type
Compressor
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
Removed old gauges with open end wrench
wrapped Teflon tape on threads of new gauges and screwed them in.
wrapped Teflon tape on threads of new gauges and screwed them in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Needed some upgrades to bring it back from the dead
michael - August 15, 2017
Tool Type
Compressor
Difficulty
Easy
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Wrench Set, Nutdriver, Paint, WD 40, thread tape
First disassembled the unit, knocked off the rust and repainted the silver exterior. Installed back with all new hardware, all the parts I purchased from you and reinstalled all the exterior plastic. Sucker runs like brand new !! This air compressor has been the most USED/ABUSED tool in my garage since I bought it. Was borrowed WITH and WITHOUT permission, but always got back to me in one piece. New hoses and fittings....Paint and clear coat. Let the old hardware SOAK in PBR and WD40. Used rust removal gel on the outside, POR 15 silver painted back on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
