Medium
1-2 hours
This is an authentic manufacturer-sourced part which is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. The purpose of this gasket is to provide a tight seal for the cylinder head plate. Unfortunately, over time it will wear out and it may begin to crack eventually requiring a replacement to ensure peak performance. Keep in mind this high-quality gasket is made of durable composite material and is sold individually. Please make sure to check the diagrams of your model for the exact location and application of this component.
Gasket-cyl Hd Plate 694088
OEM part for: Briggs & Stratton Engines
Part Number: 694088
$8.91
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Gasket-cyl Hd Plate will fit the following 8615 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 8615 matching models.
Briggs & Stratton Engines
Show More Compatible Models8615 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Briggs & Stratton Engines
- Toro
This item works with the following types of products:
- Engine
- Lawn Mower
- Snowblower
This part replaces obsolete part #: 555554, 691892, 273346
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Gasket-cyl Hd Plate
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The cylinder head plate under valve cover was leaking oil.
randy - June 26, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Engine
Difficulty
Medium
Time
30-60 minutes
Tools Used
Pliers, Socket set
Parts Used
I removed the valve cover, rocker arms, and valve springs in order to remove the head plate. Then I replaced the gasket and reassembled the other parts in reverse order along with a new valve cover gasket. I also had to adjust the valves.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
old & missing parts
Mark - July 2, 2023
Tool Type
Engine
Difficulty
Easy
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver
Total rebuild
Did you find this story helpful?
Thanks for voting and helping fellow customers!
blown head gasket,/ oil leak
Michael - February 11, 2019
Tool Type
Snowblower
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Wrench Set, n/a
removed front cover and head replaced gaskets
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Oil leaks at cylinder head and crankcase
John - June 18, 2018
Tool Type
Engine
Difficulty
Medium
Time
1-2 hours
Tools Used
Socket set, Wrench Set, Torque wrench
1. Remove valve cover
2. Remove rocker arms and push rods (keep them grouped by valve name ie. intake and
exhaust)
3. Remove cylinder head
4. Remove valves (label by name)
5. Remove cylinder head plate and old gasket
6. Install new cylinder head plate and gasket
7. Reinstall valves
7. Reinstall cylinder head. Torque for head bolts on this specific engine is 220 in. lbs.
8. Reinstall rocker arms and push rods
9. Reinstall valve cover using new gasket
10. Drain oil
11. Remove crank case bolts
12. Remove old gasket carefully. Do not gouge mating surfaces
13. Install new gasket and cover. Do not over tighten
14. Fill with new oil
15. Ops/leak check
2. Remove rocker arms and push rods (keep them grouped by valve name ie. intake and
exhaust)
3. Remove cylinder head
4. Remove valves (label by name)
5. Remove cylinder head plate and old gasket
6. Install new cylinder head plate and gasket
7. Reinstall valves
7. Reinstall cylinder head. Torque for head bolts on this specific engine is 220 in. lbs.
8. Reinstall rocker arms and push rods
9. Reinstall valve cover using new gasket
10. Drain oil
11. Remove crank case bolts
12. Remove old gasket carefully. Do not gouge mating surfaces
13. Install new gasket and cover. Do not over tighten
14. Fill with new oil
15. Ops/leak check
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
