Medium
1-2 hours
This is a genuine replacement part manufactured for use with small engines. The breather gasket is used to form a seal between the breather and cylinder. Breathers relieve pressure inside the crankcase by allowing air to exit, but not enter. The air can contain oil that clogs the breather. It is recommended to replace the gasket when servicing the breather to ensure a good seal when the parts are reassembled.
Gasket-breather 699833
OEM part for: Briggs and Stratton
Part Number: 699833
$5.71
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Gasket-breather will fit the following 19964 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Briggs and Stratton
Show More Compatible ModelsThis item works with the following types of products:
- Engine Parts
This part replaces obsolete part #: 699472 (Used Before Code Date 11070100), 699472, 696125, 272481S, 271904, 272481
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Exactly as shown.
Arrive in perfect condition, shipping was fast.
Victor -
February 1, 2021
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Gasket-breather
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Leaking oil out breather
KENNETH - June 9, 2017
👍 2 of 2 people found this instruction helpful
Tool Type
Engine
Difficulty
Easy
Time
30-60 minutes
Tools Used
Socket set
Took off muffler. Took off leaking breather. Replaced all and re-installed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
rings worn -valve tappets needed adjusting
Samuel - July 1, 2021
Tool Type
Lawn Mower
Difficulty
Expert
Time
1-2 hours
Tools Used
Power Drill, Socket set, Wrench Set, Nutdriver, cyliinder hone-ring compressor-feeler guages
overhauled engine-rebuilt carb-ground valves-reset coil air gap
Did you find this story helpful?
Thanks for voting and helping fellow customers!
exhaust valve was bad
Ron - March 20, 2019
Tool Type
Engine
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Power Drill, Socket set, Nutdriver
replaced the exhaust valve
installed the new head gasket
torque down cylinder head bolts
check for compression - ok
installed the new head gasket
torque down cylinder head bolts
check for compression - ok
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Pressure washer motor ran hot causing it to jump time!
Richard - July 7, 2017
Tool Type
Engine
Difficulty
Easy
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, Nutdriver
Completely disassembled motor replaced timing gear and reassembled!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
New 21" front self propelled push mower 190cc B&S engine with less than 5 hours use. mower blade found part of fallen tree limb and it jammed between blade and mower deck. The impact broke the cam'
Kent - December 4, 2016
Tool Type
Lawn Mower
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Inch pound torque wrench
Removed blade
Removed engine
Drained oil and fuel.
Removed crankcase cover and cylinder head.
Removed damaged camshaft assembly and oil slinger
Inspected crankshaft valves and lifters for damage (none)
Inspected installed crankshaft oil seal for tears/damage(none)
Used assembly lube on all moving parts.
Installed valves valve springs and keepers.
Installed lifters
Installed new cam aligned crankshaft/cam timing marks.
Piston at TDC rotated counter clockwise .250" to check valve to lifter clearance
Installed sump gasket replaced cover and torqued bolts to spec
Installed new cylinder head gasket and torqued cylinder head bolts to spec
Finished reassembly installed motor on to mower deck put on new blade
Pulled starter rope it started let engine warm up get the oil flowing.
MADE sure there were no gremlins in the yard to kill my mower again and cut the grass.
Removed engine
Drained oil and fuel.
Removed crankcase cover and cylinder head.
Removed damaged camshaft assembly and oil slinger
Inspected crankshaft valves and lifters for damage (none)
Inspected installed crankshaft oil seal for tears/damage(none)
Used assembly lube on all moving parts.
Installed valves valve springs and keepers.
Installed lifters
Installed new cam aligned crankshaft/cam timing marks.
Piston at TDC rotated counter clockwise .250" to check valve to lifter clearance
Installed sump gasket replaced cover and torqued bolts to spec
Installed new cylinder head gasket and torqued cylinder head bolts to spec
Finished reassembly installed motor on to mower deck put on new blade
Pulled starter rope it started let engine warm up get the oil flowing.
MADE sure there were no gremlins in the yard to kill my mower again and cut the grass.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The engine on my log splitter would only stay running with the choke on, every time I turn the choke off the engine would die.
Gary - November 2, 2016
Tool Type
Engine
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Socket set, Nutdriver
Remove air cleaner, there are three screws that hold the back plate on remove them, the gasket may stick to the carburetor so you will have to clean the old gasket off, the new part that I got is universal so I had to cut off a tab which was not hard at all. Put the new backplate on and put the air cleaner back on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Exhaust valve held open.
Robert - July 24, 2017
👍 0 of 1 people found this instruction helpful
Tool Type
Lawn Mower
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Socket set, Nutdriver, Hammer
1. Disassembled the engine.
2. Drove the valve guide back into place.
3. Reassembled the engine with the new gaskets.
2. Drove the valve guide back into place.
3. Reassembled the engine with the new gaskets.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
