Medium
30-60 minutes
This is an Authentic OEM sourced replacement part designed for use with Husqvarna Chainsaws. This is the Hose that delivers fuel from the Tank to the Engine. It is made out of Rubber and it is Sold Individually. Please note Fuel Filter is Sold Separately.
Fuel Hose 591375201
OEM part for: Husqvarna
Part Number: 591375201
$6.22
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Frequently Purchased Together ?
Compatibility
This Fuel Hose will fit the following 277 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 277 matching models.
Husqvarna
Show More Compatible Models277 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Husqvarna
This item works with the following types of products:
- Chain Saw
- Saw
This part replaces obsolete part #: 5035776-02, 5817562-02, 581756202, 544325002, 503577602
Repair Videos ?
Watch the Repair Video for
Fuel Hose
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
1
3 stars
1
2 stars
0
1 stars
0
< PREV
- 1
very easy repair, 2 min. repair
correct part arrived on time
Guest -
April 6, 2020
Verified Purchase
Worked as expected
Part fit and worked as expected
Guest -
March 24, 2020
Verified Purchase
great part, it fit as expected
the fuel hose fit. Thought I would not need it but found old line broken.. chainsaw works.
Guest -
January 1, 2020
Verified Purchase
What I expected.
Parts were what expected and were exact replacements
Guest -
January 28, 2020
Verified Purchase
Short
This fuel line was short. After rebuilding the intake and using a piece there the remaining line was short
Ed -
April 18, 2020
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Fuel Hose
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Prime bulb return line dry rotted, leaking gas.
brandon - September 11, 2016
👍 6 of 8 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Hard
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Nutdriver, Two picks, one straight, one 90 degrees, knife
1. Remove chain and bar( for easy maneuverability), empty gas in tank, then top cover, followed by handle and throttle grip. The throttle has to be disconnected from carb, and you have to spin the linkage to remove because it does not come straight out.
2. You can choose to remove carb, I was able to do repair without removing, probably more difficult, but might have saved a little time. I removed return line and fuel lines and prime bulb from saw, followed by grommets. To remove fuel line you have to open gas tank and pull out filter and fuel line with your 90 degree pick. Remove filter and hose, replace with new.
3. When I replaced grommets and hose, I put a little oil on them to make things go on a little easier. I found it is easier to install grommets on hose first and then install grommets on saw. You can always push and pull hose through.
4. Once all hoses are on and secure, reinstall your filter on line and replace inside tank. I cut about two inches off the tank line before installing filter, just because it seemed a little long, your choice. I only had one line that was bad, but I figured while I was replacing one, might as well do them all, the others are probably going to fail soon.
5. In order to replace exhaust screen, you will have to remove chain break handle, two hex head bolts, slide screen out, slide new one in and done.
6. Once installed, I reassembled everything in the reverse order it come out. Chain brake handle, main handle then throttle cover, remember to install throttle linkage, you have to spin it to get back next to the carb, this can be a little tedious, but make sure it is where it needs to go before bolting main handle on, or you have to take it apart again(my mistake).
7. After throttle cover, replace your top cover, and chain and bar, add gas and your good to go.
2. You can choose to remove carb, I was able to do repair without removing, probably more difficult, but might have saved a little time. I removed return line and fuel lines and prime bulb from saw, followed by grommets. To remove fuel line you have to open gas tank and pull out filter and fuel line with your 90 degree pick. Remove filter and hose, replace with new.
3. When I replaced grommets and hose, I put a little oil on them to make things go on a little easier. I found it is easier to install grommets on hose first and then install grommets on saw. You can always push and pull hose through.
4. Once all hoses are on and secure, reinstall your filter on line and replace inside tank. I cut about two inches off the tank line before installing filter, just because it seemed a little long, your choice. I only had one line that was bad, but I figured while I was replacing one, might as well do them all, the others are probably going to fail soon.
5. In order to replace exhaust screen, you will have to remove chain break handle, two hex head bolts, slide screen out, slide new one in and done.
6. Once installed, I reassembled everything in the reverse order it come out. Chain brake handle, main handle then throttle cover, remember to install throttle linkage, you have to spin it to get back next to the carb, this can be a little tedious, but make sure it is where it needs to go before bolting main handle on, or you have to take it apart again(my mistake).
7. After throttle cover, replace your top cover, and chain and bar, add gas and your good to go.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Fuel hose leaking
Joshua - December 4, 2015
👍 7 of 10 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers, Long needle nose pliers
Parts Used
Drained fuel. Took old fuel hose out.removed fuel filter, replaced filter on new hose. Removed other end from carburetor. Put on new fuel hose in..(a little tough) but chainsaw works flawlessly now. I have a Husqvarna 345.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Saw would run briefly and then shut off. Fuel hose was rotted and leaking gas at carburetor entry
Charles - June 1, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Hard
Time
More than 2 hours
Tools Used
Screwdriver, Pliers
Parts Used
Removed saw from handles and frame, disassembled the carburetor and throttle linkage. Replaced fuel filter and gromment along with the bad fuel line and reassembled.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Would not hold prime, would not start or run
Shaun - June 20, 2017
👍 2 of 3 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Long handle locking needle nose pliers
Parts Used
Replaced the primer bulb (air purge), and the fuel line from the carburetor to the tank. Have to remove the cylinder cover and air filter to access fuel lines. Getting the new fuel line into the tank beside the carburetor is the most difficult part. The fuel line is spiraled, or coiled from the factory and is this way on purpose so it can flop back and forth inside the tank regardless of what position the chainsaw is held. This creates a bit of an issue getting the fuel line into the small bushing it goes thru in the tank. A little ingenuity and patience will get it done. I used the hemostats and a very long piece of wire to pull the fuel line thru into the tank. The hemostats also helped out greatly getting the new fuel line in place on the nipple on the carburetor because the throttle linkage does not leave enough room for fingers.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
fuel lines deteriorated from age and fuel
Keith - April 6, 2022
Tool Type
Chain Saw
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Various tools
Took top of saw apart to get to the opening where the fuel line goes from the carb to the tank. installed new hose and original fuel filter. Installed straight hose. Put the saw back together. Runs fine after repair.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Wear and tear, leaking bar oil, fuel lined cracked and running lean,
ROBERT - April 17, 2020
Tool Type
Chain Saw
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set
Watched u-tube videos for each individual repair
Did you find this story helpful?
Thanks for voting and helping fellow customers!
leaking gas
Elmer - October 3, 2019
Tool Type
Chain Saw
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, twezzers
look at youtube
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Leaking fuel
Gerald - April 9, 2019
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Torx driver
Parts Used
Removed top cover & replaced the hose from primer bulb to fuel tank. Hose had to be pushed in to grommet above tank. This required the use of locking forceps to force the hose in to the grommet.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
hard starting
richard - January 24, 2019
Tool Type
Chain Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, sheet rock knife
replace the above parts along with the primer bulb
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Defective old Gas line replaced with rubhber line
Pierre - November 30, 2017
👍 1 of 2 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set, Wrench Set
Parts Used
It went well , the old Gas line originally made from transparent flexible plastic was 50 thousand of an inched smaller than the replacement line purchased , the new one was made of rubber meaning that it had a better seal as it went trough the gas tanks , this one being 50 thousand larger than the original provided a better seal so I did not lost pressure in the tank meaning the saw no longer starved for gas .
I am very satisfy with the result.
Pete
I am very satisfy with the result.
Pete
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
