eReplacementParts.com
877-346-4814
Craftsman Parts
Preferred Partners of
Repair Parts Home  Lawn Equipment Parts  Craftsman Parts  951-11589A Fuel Bowl O-Ring
photo thumbnailphoto thumbnailphoto thumbnail360 degree photo thumbnailphoto thumbnail

Fuel Bowl O-Ring

Part Number: 951-11589A
MTDCraftsmanYard MachinesYard ManTroy-BiltCub CadetBolensHusky
Availability: 25+ in stock
Price: $5.90
Order within the next 3 hours
and your part ships today!

*This part replaces obsolete part #: 951-11589, 751-11589, 951-11589 (Furnish 951-11773, Carburetor Kit Major) and 951-11597.

Product Information
Manufacturer: MTD, Craftsman, Yard Machines, Yard Man, Troy-Bilt, Cub Cadet, Bolens, Husky
Product Number: 951-11589A
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Description:
This fuel bowl o-ring is a high quality item that is supplied by original equipment manufacturer for use with lawn and garden equipment. It is used to provide an air-tight seal for the fuel bowl. Over time this o-ring may begin to shrink and crack eventually requiring replacement. Please note one durable rubber item is included per order.
Frequently Purchased With
Compatibility

This part is compatible with the following machines:

Craftsman
Yard Machines
MTD
Yard Man
Troy-Bilt
Expand the 150+ compatible machines
Products Compatibility

This item works with the following types of products:

  • • Chipper / Shredder
  • • Engine
  • • Lawn Mower
  • • Lawn Tractor
  • • Log Splitter
  • • Snowblower
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Carburetor Gasket Plate - 951-11525
Fuel Bowl O-Ring - 951-11589A
Carburetor Gasket - 951-11737
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set
Carburetor and motor gaskets bad.
Took carb off to replace gaskets on motor and carb. from ordered parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Snowblower
Parts Used:
Fuel Bowl O-Ring - 951-11589A
Fuel Drain Plug Gasket - 951-11349A
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set
Fuel was leaking around float bowl bottom of carburetor
Tilted snowblower onside removed float bowl
Remove old O ring
Cleaned were O ring goes
Installed new O ring with a dab of grease to hold in place
Reinstalled fuel bowl and tighten down screw to hold in place
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blower
Parts Used:
Fuel Bowl O-Ring - 951-11589A
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
Leaking gasket
Removed retainer bolt and sealing washer. Removed bowel and bowel gasket. Orient new gasket so the round side of the gasket is to the bowel lip. Thread the bolt back into the mounting position snug the bolt up and check for leaks around the gasket. You must make sure the bowel lip is in its sealing area and not up on the small ridge near the sealing surface of the carburetor.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Snowblower
Parts Used:
Fuel Bowl O-Ring - 951-11589A
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Wrench Set, None
Fuel leak
Removed bowl and replaced o ring gasket
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Snowblower
Parts Used:
Fuel Bowl O-Ring - 951-11589A
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set, Lights
Fuel leaking
Removed bowl, tilted machine on it side, saturated o ring with oil so it would remain seated properly, screwed on bowl.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Mower
Parts Used:
Primer - 951-10639A
AIR CLEANER HSG AS - 951-10739
Carburetor Gasket Plate - 951-11525
Fuel Bowl O-Ring - 951-11589A
Primer Hose Assembly - 951-11736
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set
Lawn mower would not start
1. Removed air cleaner assembly.
2. Removed carb.
3.cleaned mounting surfaces.
4. Cleaned carb.
5. Installed carb with new gasket.
6. Installed new primer in air cleaner housing.
7. Installed new air cleaner housing.
8. Connected fuel line and primer hose.
9. Primed carb.
10. Pulled start rope, engine started and ran Great.
11. Cut yard and mower did not stall at all.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Snowblower
Parts Used:
Fuel Bowl O-Ring - 951-11589A
Carburetor Insulator Gasket - 751P11567B
Carburetor Insulator - 751P11568A
Carburetor Gasket - 951-11569A
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, Socket set
Fuel leak
removed carburetor and replaced gaskets
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Snowblower
Parts Used:
Fuel Bowl O-Ring - 951-11589A
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Adjustable Wrench
Fuel Bowl O-Ring was old, distorted, brittle, leaking
1. Removed the Fuel Bowl on the carburetor.
2. Cleaned buildup from O-ring groove.
3. Placed O-ring and Fuel Bowl in position.
4. Tightened Fuel Bowl securing screw

Additional note: O-ring would not fully seal until its receiving groove was spotless. Used a micro screwdriver to scrape it clean.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Snowblower
Parts Used:
Fuel Bowl O-Ring - 951-11589A
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set
The previous "O" ring got pinched.
My snow blower would only run for 10 seconds then stop. After having it do that 6 times, I'm a slow learner some times, I looked at the manufactures website. No help full information at all. So I went to YouTube. Anything you want to know is on YourTube. 1 minute and I had my answer. The fuel jets were clogged. Took the bowl off, the jets out, cleaned them and put it back together. In the process of re assembling, I pinched the "O" ring. The snow blower started and I cleaned the driveway. Two days later I was in the garage and the pinched "O" ring had allowed the fuel tank to drain,..... one drop at a time. LOL. Back the web and I found eReplacement Parts, the "O" ring I needed, and in 4 days it was in my mailbox. THANKS!!!!!!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Snowblower
Parts Used:
Fuel Bowl O-Ring - 951-11589A
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set
Fuel bowl leaked
Fuel bowl gasket was very small it had to fit in a small groove . I don't know why it leaked . Was hard to get in groove
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4.9
Average Rating (out of 5):
10 Reviews
Click to filter by ratings:
5 stars
9
4 stars
1
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Works perfect!
    No leaks any more.
    Guest - 25 days ago Verified Purchase
    just what i needed
    it arrived fast and fit perfect
    Guest - June 9, 2022 Verified Purchase
    Delivery
    Delivery faster than expected
    Guest - March 25, 2022 Verified Purchase
    Just what the doctor ordered
    I should not have waited for the first snow to fire up my snowblower. My fuel bowl gasket had gotten brittle and out of round, leaking like a sieve. You all had the part, got it to me quickly, and it did the trick. Perfect fit; perfect seal.
    Dexter - January 18, 2022 Verified Purchase
    Easy repair
    The snow blower isn't leaking any gas now
    Martin - December 14, 2021 Verified Purchase
    Gasket
    Worked Well
    Guest - November 16, 2021 Verified Purchase
    Perfect fit .
    Perfect fit of parts. Parts shipped in a timely manner.
    Guest - October 11, 2021 Verified Purchase
    Just what I needed
    This website has made it easy for me to buy parts for appliances that I own and repair myself. Ill be continuing to come here for parts!
    Guest - January 17, 2021 Verified Purchase
    Simple repair with a high quality part
    It may not seem like a big deal just a O-Ring, but it stopped the fuel leak I had. This is as good quality as the original, in fact I think it is a Cub Cadet part. Not that I needed it for this part but there are also instructions how to replace the parts you order from them which is handy if you're not so handy.
    Guest - November 21, 2020 Verified Purchase
    Good product, bad delivery service. overpriced.
    Good product, bad delivery service. overpriced. The gasket fit perfectly. The United States Postal Service delivered the gasket they were slow, unclear where the package was, late on promised date of delivery, eReplacementParts should use FedEx, or UPS.
    Guest - December 21, 2021 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: MTD, Craftsman, Yard Machines, Yard Man, Troy-Bilt, Cub Cadet, Bolens, Husky
    Product Number: 951-11589A
    Classification: Part
    Weight: 0.01 lbs.
    Shipping: Ships Worldwide

    Fixing things makes sense...

    ...And we make it easy! With our Fix app, you always have a personalized repair guide on-hand. Easily find manuals and replacement parts on your phone while you’re DIYing in the garage or garden.

    "Love the flexibility of the app to add everything in the home and garage. Access to manuals and parts right there makes it convenient."

    Available on the App Store Get it on Google Play
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal