Easy
Less than 15 minutes
This genuine replacement foam pad that is specially made for use with sheet sanders. It is supplied directly from original equipment manufacturer. This pad has an adhesive back that will allow it to stick to the platen. It is made out of foam/rubber material and it is sold individually. Please note, platen and paper punch are all sold separately.
Foam Pad 584741-00
OEM part for: DeWALT, Black and Decker
Part Number: 584741-00
$8.95
In Stock
Order within the next 4 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 9 machines
Black and Decker
FS500 Type 1 Sander View Diagrams & Manuals
FS500 Type 2 Sander View Diagrams & Manuals
FS540 Type 1 Sander View Diagrams & Manuals
FS600G Type 1 Sander View Diagrams & Manuals
FS500-B Type 1 Sander View Diagrams & Manuals
FS520 Type 1 Sander View Diagrams & Manuals
TV700 Type 2 Sander View Diagrams & Manuals
QS540B Type 1 1/4 Sheet Sander View Diagrams & Manuals
FS540K Type 1 1/4 Sheet Sander View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Sander Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
hand sander pad
just what I expected,, fair price, fast shipping
Guest -
September 24, 2021
Verified Purchase
Perfect fit
The fit was perfect and delivery was right on time.
Guest -
December 7, 2020
Verified Purchase
👍
👍
Guest -
October 27, 2020
Verified Purchase
replaced an old out worn pad quick and easy replacement
the pad on my sander was old, so I decided to replace it with a new one . It was quick and easy to replace
Guest -
October 8, 2019
Verified Purchase
simple repair.
Exact size and cost very reasonable.
Guest -
May 27, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Foam Pad
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Foam pad worn out
Raymond - March 21, 2016
👍 4 of 5 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, scraper
Parts Used
Remove old foam pad and clean bottom of sander with paint thinner and let dry. Remove paper form new pad and install pad. Pad is self adhesive.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Nothing
Jamey - April 8, 2021
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Torx Bits
Removed old pad, replaced with new pad.
Have not installed brushes yet. Still a few hours left in my old brushes.
Have not installed brushes yet. Still a few hours left in my old brushes.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The pad was worn out.
Gregory - June 3, 2020
Tool Type
Sander
Difficulty
Expert
Time
Less than 15 minutes
Tools Used
, Heat gun
Parts Used
1) Use heat gun over the pad for few minutes
2) Peel it off
3) Mount a new pad
4) Run & test perfectly
2) Peel it off
3) Mount a new pad
4) Run & test perfectly
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Platen is wear out and Baffle is broken. It vibrates a lot.
Raymond - June 3, 2020
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, No other tools
Parts Used
I dismantle the whole thing. At first I thought I have to remove the bearing in order to replace the baffle but I found out that you don't have too. The cover after the baffle just fall off and that's it you can replace the baffle easily.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Platen was abraded and dented, foam pad was worn down, dust bag was lost
Beatrice - December 10, 2019
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Piece of cake, remove four screws, remove and replace platen, put screws back on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The pads was worn out
Fredric - March 27, 2019
Tool Type
Sander
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Puddy knife
Parts Used
I took off pad and replaced with a new one
Did you find this story helpful?
Thanks for voting and helping fellow customers!
broken baffle
michael - February 14, 2019
Tool Type
Sander
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
A cheap non oem part was supplied. This sander is now scrap.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Replaced Foam pad on sander
Florine - September 19, 2018
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, No tools required.
Parts Used
Took off the old pad.
Removed backing from new pad and stuck it on.
Removed backing from new pad and stuck it on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Platen and Foam Pad were worn out.
Ken - September 2, 2018
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed 4 screws and lifted platen & foam pad off.
Removed protection cover from foam pad & placed on platen.
Screwed assembly back to sander.
Removed protection cover from foam pad & placed on platen.
Screwed assembly back to sander.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
I had caused a dent in the foam pad on the orbital sander
James - March 16, 2018
Tool Type
Sander
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1 Using a torx screwdriver I removed the screws which were actually holding the pad plate to the sander not the foam pad.
2 The pad was held to the plate by a thin adhesive film. Using a putty knife I worked the pad free. Not an easy process.
3 I removed the film cover on the new pad and carefully aligning it with the screw hols, pressed it on.
4 Last I replaced the torx screws and tested the unit. Perfect.
2 The pad was held to the plate by a thin adhesive film. Using a putty knife I worked the pad free. Not an easy process.
3 I removed the film cover on the new pad and carefully aligning it with the screw hols, pressed it on.
4 Last I replaced the torx screws and tested the unit. Perfect.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
