Briggs and Stratton Parts

Grid squares measure 1x1 inch

Engine Sump 84002141

Part Number: 84002141
Briggs and StrattonToro
Availability: In Stock
Price: $84.52
Ships within 1 business day

*This part replaces obsolete part #: 590569, 590569 ((Engines With 6 Sump Screws)), 395384, 798264 and 698691.

Product Information
This is a genuine OEM sourced component which is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or a damaged engine sump that helps to secure the crankshaft, please make sure to check the appropriate diagrams of your model for the correct location and application of this part. This high-quality item is made of durable metal and is sold individually, keep in mind it includes the gasket to ensure an air-tight seal.
Frequently Purchased With

This part is compatible with the following machines:

Briggs and Stratton
Expand the 150+ compatible machines
Products Compatibility

This item works with the following types of products:

  • • Engine
  • • Lawn Mower

Questions & Answers for Engine Sump

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
3 of 3 people found this instruction helpful
Tool Type:
Parts Used:
Engine Sump - 84002141
Repair Difficulty:
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set
Sump cracked.
Replaced the sump.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Parts Used:
Seal-oil - 391483S
Engine Sump - 84002141
Repair Difficulty:
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set, Emery paper; torque wrench; miscellaneous
Bought mower for $20. Essentially new - previous owner hit pipe and broke sump ...
Comment: I worked in a lawn mower repair shop for about four years. This repair was very easy for me but may be a bit challenging for someone not really familiar with an engine from the inside ...

1. Drain oil and fuel; remove control cables, blade, and then remove engine from mower base.
2. Clean end of crankshaft with emery paper so shaft will move easily through old sump bearing. Put oil on shaft before you remove old sump.
3. Keep engine positioned with shaft upward; remove sump bolts. Tap sump to break seal and remove sump. (Always keep engine with shaft upward when sump is off! Otherwise camshaft will fall out and you'll have to re-time.)
4. Clean old gasket residue from block. A razor blade works nicely for this. Be careful not to score the soft aluminum mating surface during this operation.
5. Install new gasket - comes with sump - and reinstall sump. Torque bolts to 6 ft-lb.
6. Install new oil seal. Flat side goes to the outside. Use a large, deep socket or other sleeve to CAREFULLY drive the seal into place.
7. Reinstall engine to mower base; reinstall blade. Reconnect control(s) cables.
8. Add oil and fuel and you're ready to go ...
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
7174 South 400 West
Suite 5
Midvale, UT 84047
visa mastercard discover american express PayPal