This is a genuine part that is supplied from the original equipment manufacturer. The drive control mount is to be used in riding lawn mowers made by Husqvarna and Poulan. It connects the drive pivot section to the upper block and the lever. This part is to replace a damaged or a missing component originally installed on a new unit. It may require several bolts to secure in place using correct wrenches. This durable metal mount is sold as a single item. Note, the hardware to secure this item is sold separately. Refer to the appropriate diagrams of your specific equipment for the correct installation.
Drive Control Mount 576452801
OEM part for: Husqvarna, Poulan
Part Number: 576452801
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 60 machines
Poulan
Husqvarna
This item works with the following types of products:
- Lawn Tractor Parts
- Lawn Mower Parts
This part replaces obsolete part #: 5391315-21, 539131521
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Drive Control Mount
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
broken parts had to be replaced
Tool Type
Lawn Mower
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set
One of the cheap pewter control handle mounts broke.
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
Lower shaft section and angle drive worn out.
Tool Type
Lawn Mower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
Parts Used
Removed lower shaft section and angle drive by loosening the clamp in center of shaft. Replaced the lower shaft first. Then I installed the angle drive, set in position and tightened the set screw. I then tightened the 2 screws on the angle drive over the shaft to complete the process.
However, the angle gear is now loose again after 2 weeks of use. It won't stay tight on the shaft and the hole for the set screw is now elongated. Not sure what the next step will be.
Aluminum brackets for lawn mower zero turn handles broke.
Tool Type
Lawn Mower
Difficulty
Medium
Time
15-30 minutes
Tools Used
Socket set, Wrench Set
Parts Used
Drive handle brackets broke.
Tool Type
Lawn Mower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Wrench Set
Parts Used
2. Installed the new replacement bracket.
3. Checked to see if all worked and it test drove.
Ezt stick broke off of mower (from force of operator)
Tool Type
Lawn Mower
Difficulty
Medium
Time
1-2 hours
Tools Used
Pliers, Power Drill, Socket set, Wrench Set, Adjustable Wrench
2. Lifted front of mower up and placed block under foot deck to hold up.
3. Removed hydraulic dampener
4. Removed brake/drive rod connection
5. Began to unbolt 3 of the 4 bolts (1 was missing from manufacturer) that hold the Ezt mounts in place.
6. Pulled mounts off of mower and replaced with new parts. then reassembled back together
Drive control mount broke, couldn't move or use
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
2. Replace with new part! mow grass
Broken turn lever on my zero turn mower. Thanks for getting me the correct part very fast.
Tool Type
Lawn Tractor
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set, Adjustable Wrench
Parts Used
Steering control mount drive cracked
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set, Wrench Set
Parts Used
I was replacing the damper pistons and broke a piece of the drive pivot section off.
Tool Type
Lawn Mower
Difficulty
Medium
Time
1-2 hours
Tools Used
Socket set, Wrench Set
Removed damper piston.
Disconnected control arm from bottom of drive pivot section.
Removed the adjusting knob for the drive control unit.
Removed 3 bolts holding the drive control mount.
Removed the the control mount and replaced with new parts.
Reassembled in reverse order.
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.